Relassy NV4000 Bedienungsanleitung
24 Hours Service Email: service-eu@relassy.com
NIGHT VISION BINOCULARS
USER MANUAL
Table Of Contents
Introduction
Product Overview
Power Supply
Adjustment Mode
MENU Function
LCD Display Information
Download Files To The PC
Tips & Warnings
Manuel Français
Présentation du Produit
Source de Courant
Mode de Personnalisation
Fonction MENU
Informations sur l'écran LCD
Télécharger des Fichiers sur le PC
Conseils et Avertissements
3
4
5
6-8
9-10
11-13
14
15-16
17
18
19
20-22
23-24
25-27
28
29-30
2
Table Of Contents
Introduction
3
If you have any questions, you can contact us via email
(service-eu@relassy.com) or website (www.relassy.com). We will
take care of it as soon as possible.
We are always happy to help!
Introduction
Thank you for purchasing the Relassy Night Vision Binoculars.
This manual will help you optimize your viewing experience by
explaining how to utilize the binoculars’ controls and features,
and how to care for them.
Read the instructions carefully before using your night vision
binoculars.
The Night Vision Binoculars can be used day and night. The IR
light is not turned on during the day, and the pictures/videos are
displayed in color. In low light conditions or even complete
darkness, turn on the IR lights to see your surroundings. You can
also take photos and videos, which will be stored on the included
32 GB micro SD card.
Please use the supplied professional cable with indicator light for
charging, and downloading photos and videos to your computer using
the supplied USB cable.
Note: To see the image display more clearly, please keep a certain
distance between your eyes and the eyepiece/display during use, do
not come close.
Product Overview
4
1. Lens
2. Manual Focus Wheel
3. TF Slot
4. USB Port
5. Menu Button/Return Button
6. Mode Button
7. Power ON/OFF
8. OK/Shoot Button
9. IR Down/Zoom Out/Down Button
10. IR Up/Zoom In/Up Button
11. Infrared Illuminator
12. 6.5 Cm Screen/Eyepiece
12
5
9
2
111
10
6
7
4
3
8
Noted: Please turn off the device before charging the device.
Because the device will automatically shut down when the power
is unplugged, it needs to be turned on again.
Power Supply
5
Relassy night vision binoculars have a built-in 4000mAh lithium
battery, which can be used for up to 5 hours in night mode. Equipped
with a charging cable with indicator light, you can directly observe
whether the product is fully charged. (Red means charging, Green
means fully charged)
Power Supply
1. Insert the micro SD card into the micro SD card port and push
until it locks in place.
2. To remove the installed micro SD card, please push the card
inward and it will come up.
Tip: It is recommended to use a TF card (maximum support 128GB).
Inserting / Removing The SD Card
Hold the POWER button for 3-4 seconds to turn on/off the night
vision binoculars.
Turn ON/OFF
Adjustment Mode
6
The night vision binoculars have 3 modes and you can switch between
them by pressing the button.
Photo Mode
Video Mode
Playback Mode
Take photo
Video recording
Play back pictures/video
Adjustment Mode
1. The default is video mode after power on, please press the
button to switch to photo mode. The icon will appear in the top
left corner of the screen.
2. Press the button to take a picture.
Photo Mode
1. The default is video mode after power on, if not video mode, please
press the button and select the video mode. The icon will
appear in the top right corner of the screen.
2. Press the button to start recording the video and press the
button again to stop recording.
Video Mode
1. Watching Stored Videos and Photos: Press the button and
select playback mode. You may then toggle through your saved
photos/videos with the or buttons.
Playback Mode
Adjustment Mode
7
1. If you wear glasses, please wear glasses when using the
equipment.
2. If used during the day, make sure that the infrared light is turned
off (if the infrared light is turned on, the screen is shown in black
and white, and if the infrared light is turned off, the screen is
displayed in color).
3. When used at night or in case of insufficient light, make sure that
the IR is turned on and press the button ( the screen is black
and white when the IR light is turned on) to adjust the most
appropriate brightness according to the actual situation.
4. Adjust the focus by slowly turning the focusing wheel to ensure
that the focus has been focused.
5. Long press or button to zoom in or zoom out the image,
the zoom value will be displayed on the LCD screen.
Poor Image
1. IR-LED Night vision Camera function.
2. Regarding manual focusing: the machine lens is marked "←" and "→ ".
According to the observed target distance, please rotate the lens to the
left/right. The user can repeatedly debug the best focal length according
to the actual observation distance until it is clear on the display screen.
IR-LED Night Vision Camera Function
2. Deleting Stored Videos and Photos: In playback mode, press the
button. You can use the or button to select to
delete/lock the image you are viewing from the micro SD card,
then press to delete/lock the image.
Adjustment Mode
8
3. There is no sound when the video is played back because the
observation distance is long, the sound can not spread over a
long distance.
Note: When using the device at night, please press the button
to turn on the infrared.
4. On Photo / Video mode, if you need to observe the darker
environment, press the button to turn on the infrared lamp,
the image will become black and white, by pressing the or
button to adjust the infrared light level, a total of 7 level
brightness (0>1>2>3>4>5>6>7>0). (When the battery power is
not enough, the camera will also automatically reduce the IR
level. When the battery is 100%, it can be turned on to 7, when
the battery is 50%, it can only turn on 3, when the battery is
20%, it can only turn on 1, and when the battery is less than
10%, it cannot be turned on Infrared light).
MENU Function
Video：
Picture：
9
Resolution
Loop recording
4K/2K/1088P/1080P/720P/VGA/QVGA
OFF/1Minute/3Minutes/5Minutes/10Minutes
WDR
Motion Detection
OFF/ON
OFF/ON
Date Stamp OFF/ON
Anti-Shaking OFF/ON
Quick Review
Date Stamp
OFF/2S/5S
OFF/Date/Date Time
ISO Auto/100/200/400/800
Sharpness Strong/Normal/Soft
White Balance Auto/Daylight/Cloudy/Tungsten/Fluorescent
Image Quality Fine/Normal/Economy
Resolution 36MP/32MP/30MP/24MP/20MP/16MP/12MP/
10MP/8MP/5MP/3MP/VGA
MENU Function
Settings：
10
Date/Time
Auto Power Off
YY/MM/DD 00:00:00
OFF/1Minute/2Minutes/3Minutes/5Minutes/
10Minutes
Language Simple Chinese/Traditional Chinese/English/
Japan/Italy/France/Germany/Russia/Spain/Portugal
Frequency 50HZ/60HZ
Exposure +1/3 +0.0 -1/3 -2/3 -1.0 -4/3 -5/3 -2.0
Screen Save OFF/1Minute/3Minutes/5Minutes/10minutes
Format TF Card (Delete All Files)
Default Setting Cancel/OK
Andere Handbücher für NV4000
1
Inhaltsverzeichnis
Sprachen:
Andere Relassy Fernglas Handbücher
