Reliable F156 Series Bedienungsanleitung

Model F1-56 UprightModel F1-56 Pendent

Model F1-56

Horizontal Sidewall

Model F1-56 Vertical Sidewall

Note: Not all versions of the product are shown.

F1-56 Series Sprinklers Summary

Sprinkler

Model

K-Factor gpm/psi1/2

(lpm/bar1/2)Orientation Listings & Approvals Max. Working Pressure

psi (bar)

Sprinkler

Identication

Number (SIN)

F1-56 5.6 (80)

Upright

Intermediate Upright

cULus, FM, LPCB,

VdS, EC

175 (12)

250 (17) (cULus only) RA1325

Pendent cULus, FM, LPCB,

VdS, EC

175 (12)

250 (17) (cULus only) RA1314

Horizontal Sidewall cULus, FM 175 (12)

250 (17) (cULus only) RA1335

Vertical Sidewall cULus, FM, LPCB 175 (12) RA1385

Table A

Note: This bulletin may contain information on New and Legacy

sprinklers that reflects a dimensional change only.

Sprinkler Identication Number (SIN), application, performance,

and listings/approval are not otherwise affected. Sprinklers with

New frames will include the sufx “N” in the order.

Features

• Standard coverage standard-response sprinklers

• Upright, pendent, horizontal sidewall, and vertical sidewall

deflectors

• Low prole, compact design

• Available in a wide variety of nishes

• Available as Intermediate Level Sprinklers

Product Description

Reliable Model F1 series sprinklers are standard-response

standard spray automatic re sprinklers utilizing a 5.0 mm glass

bulb thermal element.

Pendent and horizontal sidewall sprinklers may be installed

exposed or surface mounted using escutcheons such as the

Reliable Models B, C, or HB (reference Technical Bulletin 204).

When installed recessed, the Model F1-56 series sprinklers

are specically listed with and may only be installed with listed

Reliable escutcheons. Refer to the technical information on the

following pages for specic listings for recessed installations and

refer to Figures 7 and 8 for dimensional information.

When tted with an approved water shield, these sprinklers may

considered intermediate sprinklers for use in racks, below grated

walkways, and other areas where intermediate level sprinklers are

required.

Table A provides a summary of the approvals and availability

of specic Model F1 series sprinkler congurations. Additional

technical information for each sprinkler model is provided on the

following pages.

www.reliablesprinkler.com

K-factor 5.6 (80)

F1-56 Series

Standard-Response Sprinklers

Bulletin 071 October 2022

Model F1-56 Upright Sprinkler SIN RA1325

Technical Specications

Style: Upright, Intermediate Upright

Threads: 1/2” NPT or ISO 7-R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure:

175 psi (12 bar)

250 psi (17 bar) (cULus only)

Material Specications

Thermal Sensor: 5.0mm Glass Bulb

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy

Sealing Washer: Nickel with PTFE

Load Screw: Copper Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table B)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

155°F (68°C)

175°F (79°C)

200°F (93°C)

286°F (141°C)

360°F (182°C)

500°F (260°C)

Guards & Shields (New Frames)

Factory Water Shield (cULus, FM)

F-1 Guard (cULus, FM)

F-3 Guard with Shield (cULus, FM)

Guards and Shields (Legacy Frames)

Factory Water Shield

C-1 Guard (FM)

C-3 Guard with Shield (cULus, FM)

D-1 Guard (cULus)

D-3 Guard with Shield (cULus)

Sprinkler Wrench

Model W2

Model J (New frame with guard installed)

Model JD (Legacy frame with guard

installed)

Listings and Approvals

cULus Listed

FM Approved

LPCB

VdS

Model F1-56 Upright Sprinkler Components and Dimensions Figure 1

Deflector

Glass Bulb

(5 mm)

Wrench Flat

Threads

1 3/8" [33mm]

3 1/4" [83mm]

Cap/Seal Assembly

Load Screw

2 1/4" [58mm]

F1_HALF_UPR_SHIELD

Shown with Optional

Factory Installed Water Shield

( Intermediate Upright)

Bulletin 071

October 2022

Page 2 of 9

www.reliablesprinkler.com

Model F1-56 Pendent Sprinkler SIN RA1314

Technical Specications

Style:

Pendent

Recessed Pendent

Threads: 1/2” NPT or ISO 7-R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure:

175 psi (12 bar)

250 psi (17 bar) (cULus only)

Material Specications

Thermal Sensor: 5.0mm Glass Bulb

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy

Sealing Washer: Nickel with PTFE

Load Screw: Copper Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table B)

Sensitivity

Standard response

Temperature Ratings (1)

135°F (57°C)

155°F (68°C)

175°F (79°C)

200°F (93°C)

286°F (141°C)

360°F (182°C)

500°F (260°C)

Recessed Escutcheons

Model F1 (cULus, LPCB, VdS, CE)

Model F2 (cULus, FM, LPCB, VdS, CE)

Model FP (cULus, VdS, CE)

Guards & Shields(New Frames)(2)

F-1 Guard (FM)

F-5 Guard/Shield Kit (FM)

F-7 Guard (cULus)

F-8 Guard/Shield Kit (cULus)

S-1 Shield (cULus, FM)

Guards & Shields (Legacy Frames)(2)

C1 Guard (FM)

C5 Guard/Shield Kit (FM)

D1 Guard (cULus, FM)

D4 Guard/Shield Kit (FM)

D5 Guard/Shield Kit (cULus, FM)

S-1 Shield (cULus, FM)

Sprinkler Wrenches

Model W2 (pendent)

Model W4 (recessed)

Model J (with guard installed)

Listings and Approvals(3)

cULus Listed

FM Approved

LPCB

VdS

Notes:

1. 286°F (141°C) and higher temperature rated sprinkler not listed for recessed use.

2. Not suitable for used with recessed pendent installations

3. When used surface mounted or exposed. See Recessed Escutcheon and Cover Plate section for specic approvals when installed

recessed or concealed.

Model F1-56 Pendent Sprinkler Components and Dimensions Figure 2

F1_HALF_PEND_INT

Deflector

Glass Bulb

(5 mm)

Wrench Flat

Threads

3 1/4" [83mm]

2 1/4" [57mm]

1" [25mm]

Load Screw

Cap/Seal

Assembly

Shown with Optional S-1 Water

Shield (Ordered Separately)

Note: Please refer to Figure 7 for recessed installation.

Bulletin 071

October 2022

Page 3 of 9

www.reliablesprinkler.com

Model F1-56 Horizontal Sidewall Sprinkler SIN RA1335

Technical Specications

Style: Horizontal Sidewall

Threads: 1/2” NPT or ISO 7-R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure:

175 psi (12 bar)

250 psi (17 bar) (cULus only)

Material Specications

Thermal Sensor: 5.0mm Glass Bulb

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy

Sealing Washer: Nickel with PTFE

Load Screw: Copper Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table B)

Sensitivity

Standard response

Temperature Ratings (1)

135°F (57°C)

155°F (68°C)

175°F (79°C)

200°F (93°C)

286°F (141°C)

360°F (182°C)

Recessed Escutcheons(2)

Model F1 (cULus, FM)

Model F2 (cULus, FM)

Model FP (cULus)

Guards & Shields (New Frames)(3)

F-4 Guard (FM)

F-7 Guard/Shield Kit (cULus)

Guards & Shields (Legacy Frames)(3)

F-4 Guard (FM)

F-7 Guard/Shield Kit (cULus)

Sprinkler Wrenches

Model W2 (horizontal)

Model W4 (recessed)

Model J (New frame with guard installed)

Model JD (Legacy frame with guard

installed)

Listings and Approvals

cULus Listed

FM Approved(4)

Notes:

1. 286°F (141°C) and higher temperature rated sprinkler not listed for recessed use.

2. cULus Listed for Light and Ordinary Hazard when installed exposed or surface mounted. Listed for Light Hazard ONLY when

installed recessed.

3. Not suitable for recessed horizontal sidewall installations.

4. FM Approved for Light Hazard ONLY.

Model F1-56 Horizontal Sidewall Sprinkler Components and Dimensions Figure 3

Bulletin 071

October 2022

Page 4 of 9

www.reliablesprinkler.com

F1_HALF_HSW

2 3/4" [70mm]

1 1/8" [28mm]

Threads

Cap/Seal Assembly

Load ScrewDeflector

Glass Bulb

(5 mm)

Wrench Flat

Frame

Note: Please refer to Figure 7 for recessed installation.

Model F1-56 Vertical Sidewall Sprinkler SIN RA1385

Technical Specications

Style:

Upright Vertical Sidewall

Pendent Vertical Sidewall

Threads: 1/2” NPT or ISO 7-R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specications

Thermal Sensor: 5.0mm Glass Bulb

Sprinkler Frame: Brass Alloy

Cap: Bronze Alloy

Sealing Washer: Nickel with PTFE

Load Screw: Copper Alloy

Deflector: Brass Alloy

Sprinkler Finishes

(See Table B)

Sensitivity

Standard response

Temperature Ratings

135°F (57°C)

155°F (68°C)

175°F (79°C)

200°F (93°C)

286°F (141°C)

360°F (182°C)

Guards & Shields (New Frames)

F-2 Guard (FM)

Guards & Shields (Legacy Frames)

F-2 Guard (FM)

Sprinkler Wrenches

Model W2

Model J (New frame with guard installed)

Model JD (Legacy frame with guard

installed)

Listings and Approvals(1)

cULus Listed

FM Approved

LPCB(2)

Notes:

1. Listed and approved for Light Hazard ONLY.

2. LPCB approved for use in pendent position ONLY.

Model F1-56 Vertical Sprinkler Components and Dimensions Figure 4

Bulletin 071

October 2022

Page 5 of 9

www.reliablesprinkler.com

F1_HALF_VSW

2 1/4" [57mm]

1 1/2" [38mm]

Threads

Cap/Seal Assembly

Load ScrewDeflector

Glass Bulb

(5 mm)

Wrench Flat

Frame

Models F1 & F1FR Pendent Sprinkler

with Model F1 Recessed Escutcheon

3/4" (19mm) Nominal Adjustment

2-7/8" (72 mm) Dia.

1-3/4"

(44 mm)

2-1/4"

(57 mm) Dia.

Hole in Ceiling

1-15/16"

(49 mm) Dia.

Minimum

Recess

Maximum

Recess

(25 mm)

Face of Fitting

to Face of Ceiling

1-1/8" (29 mm) at

Max. Recess

3/8" (10 mm) at

Min. Recess

Models F1 & F1FR Pendent Sprinkler

with Model FP Recessed Escutcheon

1/2" (13mm) Nominal Adjustment

(25 mm)

2-5/16"

(59 mm) Dia.

Minimum

Recess Maximum

Recess

1/2"

(12 mm)

3-3/16" (78 mm) Dia.

Face of Fitting

to Face of Ceiling

1-1/2" (38 mm) at

Max. Recess

1" (25 mm) at

Min. Recess

2-7/8" (72 mm) Dia.

1-3/4"

(44 mm)

Minimum

Recess

Maximum

Recess

1-1/4"

(32 mm)

Face of Fitting

to Face of Ceiling

7/8" (22 mm) at

Max. Recess

3/8" (10 mm) at

Min. Recess

2-1/4"

(57 mm) Dia.

Hole in Ceiling

1-15/16"

(49 mm) Dia.

2-1/2"

(64 mm) Dia.

Hole in Ceiling

Models F1 & F1FR Pendent Sprinkler

with Model F2 Recessed Escutcheon

1/2" (13mm) Nominal Adjustment

F1_REC_PEND

Reducing

Fitting

Reducing

Fitting

Reducing

Fitting

Note: Model FP recessed assemblies may not be used where the

pressure in the space above the ceiling is positive with respect to

the protected area. Ensure that the openings in the Model FP cup

are unobstructed following installation.

Vented Cup

Recessed Installation: Pendent Sprinklers Figure 5

FP Escutcheon F1 Escutcheon

(F2 Similar)

F1 Escutcheon

(F2 Similar)

Bulletin 071

October 2022

Page 6 of 9

www.reliablesprinkler.com

2-1/4"

(57 mm)

Dia.

Hole

1-15/16"

(49 mm)

Dia.

2-1/4"

(57 mm)

Dia.

Hole

1-15/16"

(49 mm)

DIA.

2-7/8"

(73 mm)

Dia.

2-7/8"

(73 mm)

Dia.

2-1/8" (54 mm) Minimum Recess

1-5/8" (42 mm) Maximum Recess

2 1/8" (54 mm) Minimum Recess

1-3/8" (35 mm) Maximum Recess

2-5/8"

(67 mm)

Dia

Hole.

2-5/16"

(58 mm)

Dia.

3-1/4"

(83 mm)

Dia.

1-1/4" (32 mm)

+/- 1/4" (6 mm)

Face of fitting

to face of wall

1-3/8" (35 mm) Minimum Recess

7/8" (22 mm) Maximum Recess

3/8" (16 mm)

+/- 1/4" (6 mm)

Face of fitting

to face of wall

1/2" (12 mm)

+/- 3/8" (10 mm)

Face of fitting

to face of wall

4" - 12"

(102 mm - 305 mm)

Deflector to ceiling

F1FR_REC_HSW

Reducing

Fitting

Reducing

Fitting

Reducing

Fitting

9/16" [14mm]

Model F1FR Horizontal Sidewall Sprinkler

with Model FP Recessed Escutcheon

1/2" (13mm) Nominal Adjustment

Model F1FR Horizontal Sidewall Sprinkler

with Model F2 Recessed Escutcheon

1/2" (13mm) Nominal Adjustment

Model F1FR Horizontal Sidewall Sprinkler

with Model F1 Recessed Escutcheon

3/4" (19mm) Nominal Adjustment

F2 Recessed escutcheon

1/2" (13 mm) Adjustment

F1 Recessed escutcheon

3/4" (19 mm) Adjustment

4" - 12"

(102 mm - 305 mm)

Deflector to ceiling

9/16" [14mm]

4" - 12"

(102 mm - 305 mm)

Deflector to ceiling

9/16" [14mm]

Note: Model FP recessed assemblies may not be used where the

pressure in the space behind the sprinkler is positive with respect

to the space in the protected area. Ensure that the openings in

the Model FP cup are unobstructed following installation.

Vented Cup

Recessed Installation: F1-56 Horizontal Sidewall Sprinklers Figure 6

Bulletin 071

October 2022

Page 7 of 9

www.reliablesprinkler.com

Installation

Model F1 Series sprinklers must be installed in accordance with

NFPA13 and the requirements of all applicable authorities having

jurisdiction. Model F1 Series sprinklers must be installed with the

Reliable sprinkler installation wrench identied in the Design and

Installation Information table in this Bulletin. Any other wrench may

damage the sprinkler. A leak tight sprinkler joint can be obtained

with a torque of 8 to 18 lb-ft (11 to 24 N.m). Do not tighten

sprinklers over the maximum recommended installation torque.

Exceeding the maximum recommended installation torque may

cause leakage or impairment of the sprinkler.

Glass bulb sprinklers have orange bulb protectors or protective

caps to minimize bulb damage during shipping, handling and

installation. Reliable sprinkler installation wrenches are designed

to install sprinklers with bulb protectors in place. Remove the bulb

protector at the time when the sprinkler system is placed in service

for re protection. Removal of the bulb protector before this time

may leave the bulb vulnerable to damage. Remove bulb protectors

by undoing the clasp by hand. Do not use tools to remove bulb

protectors.

Standard Finishes Special Application Finishes

Sprinkler F1, F2 and FP(2) Escutcheons Sprinkler F1, F2 and FP(2) Escutcheons

Bronze (Unnished) Brass Electroless Nickel PTFE(3)(4) Bright Brass

Chrome Chrome Bright Brass(5) Satin Chrome

White Polyester(3)(8) White Polyester Stain Chrome Custom Color Polyester

Custom Color Polyester(3)(6)(8)

Lead Plated(3)

Wax Coated(3)(7)

Wax Over Lead(3)(7)

Notes:

1. Paint or any other coating applied over the factory nish will void all approvals and warranties.

2. Model FP escutcheons utilize a galvanized steel cup with a nished trim ring.

3. cULus Listed as corrosion resistant.

4. FM Approved as corrosion resistant.

5. For 200°F (93°C) maximum temperature rated sprinklers only.

6. LPCB and VDS approved for SIN RA1314 and RA1325.

7. Clear wax used on ordinary temperature rated sprinklers; brown wax used on intermediate temperature rated sprinklers. Brown wax may be used on

high temperature rated sprinklers where the ambient temperature does not exceed 150°F (66°C).

8. Not available for 500°F (260°C) temperature rated sprinklers.

Sprinkler and Escutcheon Finishes(1) Table B

Maintenance

Reliable Model F1 series sprinklers should be inspected and the

sprinkler system maintained in accordance with NFPA 25, as well

as the requirements of any Authorities Having Jurisdiction.

Prior to installation, sprinklers should remain in the original

cartons and packaging until used. This will minimize the potential

for damage to sprinklers that could cause improper operation or

non-operation.

Do not clean sprinklers with soap and water, ammonia liquid or

any other cleaning fluids. Remove dust by gentle vacuuming

without touching the sprinkler.

Replace any sprinkler which has been painted (other than factory

applied). A stock of spare sprinklers should be maintained to

allow quick replacement of damaged or operated sprinklers.

Failure to properly maintain sprinklers may result in inadvertent

operation or non-operation during a re event.

Wrenches

Model W2 (upright, pendent)

Model J (New frame with guard installed)

Model JD (Legacy frame with guard installed, similar but with zinc nish)

Model W4

(recessed pendent)

Bulletin 071

October 2022

Page 8 of 9

www.reliablesprinkler.com

P/N 9999970620

Bulletin 071

October 2022

Page 9 of 9

www.reliablesprinkler.com

Guarantee

For the guarantee, terms, and conditions, visit www.

reliablesprinkler.com.

Ordering Information

Specify the following when ordering:

Model

• F1-56

Deflector/Orientation

• Upright

• Intermediate Upright

• Pendent

• Horizontal Sidewall

• Vertical Sidewall

Temperature Rating

• See sprinkler technical specications

Sprinkler Finish

• See Table B

Recessed Escutcheon(1)(2)

• F1

• F2

• FP

Escutcheon Finish

• See Table B

Sprinkler Wrench

• Model W2 (upright and pendent)

• Model W4 (recessed)

• Model J (New frame with guard installed)

• Model JD (Legacy frame with guard installed)

Notes:

1. 286°F (141°C) sprinklers are not listed to be used recessed.

2. For FM, recessed sprinklers must use the Model F2 escutcheon.

Andere Handbücher für F156 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable A4 Bedienungsanleitung

Reliable

Reliable F1FR Bedienungsanleitung

Reliable

Reliable RFS42 Benutzerhandbuch

Reliable

Reliable F1 Series Handbuch

Reliable

Reliable F1FR-SS Series Bedienungsanleitung

Reliable

Reliable F1 LO Bedienungsanleitung

Reliable

Reliable F156 Series Handbuch

Reliable

Reliable F1S5 Series Bedienungsanleitung

Reliable

Reliable G5-80 Bedienungsanleitung

Reliable

Reliable Concealer G4A Bedienungsanleitung

Reliable

Reliable DD56-6 Handbuch

Reliable

Reliable F1 Res 30 LL Bedienungsanleitung

Reliable

Reliable Concealer G4A Bedienungsanleitung

Reliable

Reliable N252 EC Bedienungsanleitung

Reliable

Reliable Sidewall Concealer SWC Bedienungsanleitung

Reliable

Reliable F1FR-SS Series Bedienungsanleitung

Reliable

Reliable F3QR56 Bedienungsanleitung

Reliable

Reliable F1FR-FS56 Bedienungsanleitung

Reliable

Reliable F1FR-300 Bedienungsanleitung

Reliable

Reliable GFR Bedienungsanleitung

Reliable

Reliable F1FR28 Series Bedienungsanleitung

Reliable

Reliable DDX PrePaK D Wartungshandbuch

Reliable

Reliable Pantman F1 Bedienungsanleitung

Reliable

Reliable RFC30 Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung