Reliable G5 Series Bedienungsanleitung

www.reliablesprinkler.com

Features

• Standard Coverage, Concealed Pendent (K2.8, 4.2, 5.6, & 8.0

[40, 60, 80, & 115 metric])

• Flat concealed cover plate available in a variety of nishes.

• Available with Stainless Steel Clad cover plate (see Table I).

• 3/4-inch (19 mm) cover plate adjustment.

• Cover plate available with optional gasket.

Product Description

Model G5 series sprinklers are standard coverage, flat plate

concealed sprinklers designed for installation in accordance with

NFPA 13 and FM Global Property Loss Prevention Data Sheets. All

Model G5 series sprinklers use a fusible-link operating element.

The sprinklers are offered with a standard Model G5 cover plate,

a Model G5 cover plate with a quick-response (QR) gasket, or a

Model G5 cover plate with a standard-response (SR) gasket. Model

G5 sprinklers with a gasketed cover plate are intended for use in

dust free environments such as clean rooms.

Model G5 sprinklers must only be used with the Model G5 cover

plate listed or approved with the sprinkler. Table A provides a

summary of available Model G5 series sprinklers, along with

Listing and Approval information for each sprinkler and cover plate

combination.

Model G5 Series Sprinkler Summary Table A

Sprinkler

Model

K-Factor

gpm/psi1/2

(L/min/bar1/2)

Cover Plate

Model

Listings

and

Approvals

Sensitivity

Max. Working

Pressure

psi (bar)

Sprinkler

Identication

Number (SIN)

G5-28 2.8

(40)

G5 cULus QR

175 (12) RA3411

FM SR

G5 QR Gasket cULus QR

G5 SR Gasket cULus, FM SR

G5-42 4.2

(60)

G5 cULus QR 175 (12) RA3413G5 QR Gasket

G5 SR Gasket cULus SR

G5-56 5.6

(80)

G5 cULus QR 250 (17)

RA3415

FM, LPCB, VdS, CE SR 175 (12)

G5 QR Gasket cULus QR 250 (17)

G5 SR Gasket cULus SR 250 (17)

FM SR 175 (12)

G5-56 300 5.6

(80)

G5 cULus QR 300 (21) RA4014G5 QR Gasket

G5 SR Gasket cULus SR

G5-80 8.0

(115)

G5 cULus QR 175 (12) RA3412G5 QR Gasket

G5 SR Gasket cULus SR

G5-80F 8.0

(115)

G5 FM SR 175 (12) RA3417

G5 SR Gasket

Note: Gasket material is silicone rubber, available in white only.

Model G5 Cover Plate

with SR Gasket

Model G5 Cover Plate

with QR Gasket

Model G5 Cover Plate

Model G5 Series Sprinklers

Standard Spray, Flat Concealed Pendent

Available with Gasketed Cover Plate

Bulletin 034 May 2022

Model G5-28 Standard Coverage, Concealed Pendent Sprinkler SIN RA3411

Technical Specications

Style: Flat Concealed Pendent

Threads: 1/2” NPT or ISO 7-1 R1/2

Nominal K-Factor: 2.8 (40 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specications

Fusible Link: Beryllium Nickel

Sprinkler Body: Brass Alloy

Levers: Bronze Alloy

Yoke: Brass Alloy

Sealing washer: Nickel with PTFE

Load Screw: Bronze Alloy

Towers: Copper Alloy

Pins: Stainless Steel

Deflector: Bronze Alloy

Cup: Steel

Sprinkler Temperature Ratings

165°F (74°C)

212°F (100°C)

Sensitivity

(See Table B)

Cover Plates

Model G5

Model G5 QR Gasket (cULus only)

Model G5 SR Gasket

Cover Plate Finishes

(See Table I)

Sprinkler Wrench

Model W3

Model FC

Listings and Approvals

cULus Listed (Light Hazard only)

FM Approved

Model G5-28 Sprinkler Components and Dimensions Figure 1

Model G5-28 Sprinkler Sensitivity Table B

Cover Plate Model Listing or Approval Agency

cULus FM

G5 QR SR

G5 QR Gasket QR --

G5 SR Gasket SR SR

QR: Quick-response

SR: Standard-response

Bulletin 034

May 2022

Page 2 of 9

www.reliablesprinkler.com

Model G5-42 Standard Coverage, Concealed Pendent Sprinkler SIN RA3413

Technical Specications

Style: Flat Concealed Pendent

Threads: 1/2” NPT or ISO 7-1 R1/2

Nominal K-Factor: 4.2 (60 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specications

Fusible Link: Beryllium Nickel

Sprinkler Body: Brass Alloy

Levers: Bronze Alloy

Yoke: Brass Alloy

Sealing washer: Nickel with PTFE

Load Screw: Bronze Alloy

Towers: Copper Alloy

Pins: Stainless Steel

Deflector: Bronze Alloy

Cup: Steel

Sprinkler Temperature Ratings

165°F (74°C)

212°F (100°C)

Sensitivity

(See Table C)

Cover Plates

Model G5

Model G5 QR Gasket

Model G5 SR Gasket

Cover Plate Finishes

(See Table I)

Sprinkler Wrench

Model W3

Model FC

Listings and Approvals

cULus Listed (Light Hazard only)

Model G5-42 Sprinkler Components and Dimensions Figure 2

Model G5-42 Sensitivity Table C

Cover Plate Model

Listing or Approval Agency

cULus

G5 QR

G5 QR Gasket QR

G5 SR Gasket SR

QR: Quick-response

SR: Standard-response

Bulletin 034

May 2022

Page 3 of 9

www.reliablesprinkler.com

Model G5-56 Standard Coverage, Concealed Pendent Sprinkler SIN RA3415

Technical Specications

Style: Flat Concealed Pendent

Threads: 1/2” NPT or ISO 7-1 R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure:

175 psi (12 bar)

250 psi (17 bar) (cULus only)

Material Specications

Fusible Link: Beryllium Nickel

Sprinkler Body: Brass Alloy

Levers: Bronze Alloy

Yoke: Brass Alloy

Sealing washer: Nickel with PTFE

Load Screw: Bronze Alloy

Towers: Copper Alloy

Pins: Stainless Steel

Deflector: Bronze Alloy

Cup: Steel

Sprinkler Temperature Ratings

165°F (74°C)

212°F (100°C) (cULus, FM, LPCB, CE only)

Sensitivity

(See Table D)

Cover Plates

Model G5

Model G5 QR Gasket (cULus only)

Model G5 SR Gasket (cULus and FM only)

Cover Plate Finishes

(See Table I)

Sprinkler Wrench

Model W3

Model FC

Listings and Approvals

cULus Listed (Light & Ordinary Hazard only)

FM Approved

LPCB Approved

VdS Approved [165°F (74°C) only]

CE Listed (2831-CPR-S2062)

Model G5-56 Sprinkler Components and Dimensions Figure 3

Model G5-56 Sensitivity Table D

Cover Plate Model

Listing or Approval Agency

cULus FM LPCB, VdS, CE

G5 QR SR SR

G5 QR Gasket QR -- --

G5 SR Gasket SR SR --

QR: Quick-response

SR: Standard-response

Bulletin 034

May 2022

Page 4 of 9

www.reliablesprinkler.com

Model G5-56 300 Standard Coverage, Concealed Pendent Sprinkler SIN RA4014

Technical Specications

Style: Flat Concealed Pendent

Threads: 1/2” NPT or ISO 7-1 R1/2

Nominal K-Factor: 5.6 (80 metric)

Max. Working Pressure: 300 psi (21 bar)

Material Specications

Fusible Link: Beryllium Nickel

Sprinkler Body: Brass Alloy

Levers: Bronze Alloy

Yoke: Brass Alloy

Sealing washer: Nickel with PTFE

Load Screw: Bronze Alloy

Towers: Copper Alloy

Pins: Stainless Steel

Deflector: Bronze Alloy

Cup: Steel

Sprinkler Temperature Ratings

165°F (74°C)

212°F (100°C)

Sensitivity

(See Table E)

Cover Plates

Model G5

Model G5 QR Gasket

Model G5 SR Gasket

Cover Plate Finishes

(See Table I)

Sprinkler Wrench

Model W3

Model FC

Listings and Approvals

cULus Listed (Light & Ordinary Hazard only)

Model G5-56 300 Sprinkler Components and Dimensions Figure 4

Model G5-56 300 Sensitivity Table E

Cover Plate Model

Listing or Approval Agency

cULus

G5 QR

G5 QR Gasket QR

G5 SR Gasket SR

QR: Quick-response

SR: Standard-response

Bulletin 034

May 2022

Page 5 of 9

www.reliablesprinkler.com

Model G5-80 Standard Coverage, Concealed Pendent Sprinkler SIN RA3412

Technical Specications

Style: Flat Concealed Pendent

Threads: 3/4” NPT or ISO 7-1 R3/4

Nominal K-Factor: 8.0 (115 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specications

Fusible Link: Beryllium Nickel

Sprinkler Body: Brass Alloy

Levers: Bronze Alloy

Yoke: Brass Alloy

Sealing washer: Nickel with PTFE

Load Screw: Bronze Alloy

Towers: Copper Alloy

Pins: Stainless Steel

Deflector: Bronze Alloy

Cup: Steel

Sprinkler Temperature Ratings

165°F (74°C)

212°F (100°C)

Sensitivity

(See Table F)

Cover Plates

Model G5

Model G5 QR Gasket

Model G5 SR Gasket

Cover Plate Finishes

(See Table I)

Sprinkler Wrench

Model W3

Model FC

Listings and Approvals

cULus Listed (Light & Ordinary Hazard only)

Model G5-80 Sprinkler Components and Dimensions Figure 5

Model G5-80 Sensitivity Table F

Cover Plate Model

Listing or Approval Agency

cULus

G5 QR

G5 QR Gasket QR

G5 SR Gasket SR

QR: Quick-response

SR: Standard-response

Bulletin 034

May 2022

Page 6 of 9

www.reliablesprinkler.com

Model G5-80F Standard Coverage, Concealed Pendent Sprinkler SIN RA3417

Technical Specications

Style: Flat Concealed Pendent

Threads: 3/4” NPT or ISO 7-1 R3/4

Nominal K-Factor: 8.0 (115 metric)

Max. Working Pressure: 175 psi (12 bar)

Material Specications

Fusible Link: Beryllium Nickel

Sprinkler Body: Brass Alloy

Levers: Bronze Alloy

Yoke: Brass Alloy

Sealing washer: Nickel with PTFE

Load Screw: Bronze Alloy

Towers: Copper Alloy

Pins: Stainless Steel

Deflector: Stainless Steel

Cup: Steel

Sprinkler Temperature Ratings

165°F (74°C)

212°F (100°C)

Sensitivity

Standard Response

Cover Plates

Model G5

Model G5 SR Gasket

Cover Plate Finishes

(See Table I)

Sprinkler Wrench

Model W3

Model FC

Listings and Approvals

FM Approved

Model G5-80F Sprinkler Components and Dimensions Figure 6

Model G5-80F Sensitivity Table G

Cover Plate Model

Listing or Approval Agency

G5 SR

G5SR Gasket SR

SR: Standard-response

Bulletin 034

May 2022

Page 7 of 9

www.reliablesprinkler.com

Installation Dimensions and Cover Plate Information Table H

Cover Plate

Model

Cover Plate

Diameter

Inch

(mm)

Recommended

Hole Diameter in

Ceiling

Inch

(mm)

Cover Plate

Adjustment

Inch

(mm)

Min. to Max.

Face of Fitting

Ceiling(1)

Inch

(mm)

Min. to Max.

Dropped

Deflector

Distance

below Ceiling

Inch

(mm)

Cover Plate

Temperature

Rating

°F

(°C)

G5 3-5/16

(84)

2-5/8

(67)

3/4

(19)

1-1/2to 2-1/4

(38 to 57)

1/4to 1

(6 to 25)

135°F(3)

(57°C)

165°F(4)

(74°C)

G5 QR Gasket(2) 3-11/16

(94)

G5 SR Gasket(2) 4

(101 mm)

Notes:

1. Face of tting to ceiling dimensions are based on nominal thread make up. Verify dimensions based on tting and thread sealing method

prior to installation. A 1/2” x 1/2” brass nipple extension (Reliable P/N 6999991900) is available to assist with replacement of Reliable Model

G4A sprinklers.

2. Model G5 QR Gasket and Model G5 SR Gasket cover plates are sold as assembled units including both the cover plate and gasket. Model

G5 QR Gasket and Model G5 SR Gasket cover plates and gaskets are not interchangeable.

3. For use with 165°F (74°C) temperature rated sprinklers where the Maximum Ceiling Temperature does not exceed 100°F (38°C).

4. For use with 212°F (100°C) temperature rated sprinklers where the Maximum Ceiling Temperature does not exceed 150°F (66°C).

Notes:

1. Paint or any other coating applied over the factory nish will void all

approvals and warranties.

2. Cover plates do not carry corrosion resistant listings or approvals.

3. Custom color paint is semi-gloss unless specied otherwise.

4. Not listed for use with QR sealing gasket.

5. Stainless steel clad cover plates are Type 316 Stainless Steel on the

nished side and C102 Copper Alloy on the back side.

Application

Model G5 series sprinklers are standard coverage, flat plate

concealed pendent sprinklers. The sprinklers are intended for

use in accordance with NFPA 13 and FM Global Property Loss

Prevention Data Sheets, as well as the requirements of the

applicable approval agencies.

Model G5 series sprinklers are available as either Quick-response

(QR) or Standard-response (SR) depending on the approval

agency and cover plate selected.

Model G5 series sprinklers use Model G5 flat cover plates. Model

G5 QR Gasket and G5 SR Gasket cover plates are available to

limit air and dust movement through the ceiling.

Listing & Approval Agencies

Individual Model G5 series sprinkler may be listed or approved by

the following agencies:

• Underwriters Laboratories, Inc. and UL Canada (cULus)

Listing Category: Sprinklers, Automatic and Open

Guide Number: VNIV

• FM Approvals (FM)

• Loss Prevention Certication Board (LPCB)

• VdS Schadenverhütung GmbH (VdS)

• EC-Certicate of Conformity 0832-CPD-2062 (CE)

See Table A and the individual sprinkler data sheets in this Bulletin

for listings and approvals applicable to each sprinkler.

Standard Finishes Special Application Finishes

White Paint

Chrome(4)

Off-White Paint

Black Paint

Custom Color Paint (Specify)(3)

Raw Brass (Lacquered)

Bright Brass(4)

Finished Bronze (4)

Satin Chrome (4)

Stainless Steel Clad(5)

Custom Printed

Cover Plate Finishes(1)(2) Table I

Installation

Model G5 series sprinklers are intended to be installed in

accordance with NFPA 13, FM Global Property Loss Prevention

Data Sheets, and the requirements of applicable authorities

having jurisdiction. Model G5 series sprinklers must not be

installed in ceilings with positive pressure in the space above.

Ensure that the 4 slots in the cup are open and unobstructed

following installation.

Model G5 series sprinklers are shipped with a wrench-able

protective cap that should remain on the sprinkler until the

sprinkler system is placed in service following construction.

Model G5 series sprinklers can be installed without removing

the wrench-able protective cap using the Model W3 wrench.

Alternatively, Model G5 series sprinklers can be installed using

the Model FC wrench by temporarily removing the protective cap

during installation of the sprinkler. The use of any other wrench

to installed Model G5 series sprinklers is not permitted and may

damage the sprinkler.

Bulletin 034

May 2022

Page 8 of 9

www.reliablesprinkler.com

Replace any sprinkler or cover plate which has been painted (other

than factory applied). Properly installed Model G5 cover plates will

have an air gap that is required for proper operation, do not seal

the gap or paint the cover plates. Model G5 series sprinklers have

holes in the cup that must remain unobstructed.

Replace any sprinkler which has been damaged. A stock of spare

sprinklers should be maintained to allow quick re-placement

of damaged or operated sprinklers. Failure to properly maintain

sprinklers may result in inadvertent operation or non-operation

during a re event.

Guarantee

For the Reliable Automatic Sprinkler Co., Inc. guarantee, terms,

and conditions, visit www.reliablesprinkler.com.

Patents

Model G5 series sprinklers may be covered by one or more of the

following patents:

U.S. Patent 6,554,077, U.S. Patent 7,275,603, U.S. Patent

8,776,903, U.S. Patent 9,248,327

Ordering Information

Specify the following when ordering.

Sprinkler

• Model [G5-28] [G5-42] [G5-56] [G5-56 300]

[G5-80] [G5-80F]

• Temperature Rating [165°F (74°C)] [212°F (100°C)]

• Threads [NPT or ISO 7-1]

Cover Plate

• Model [G5, G5 QR Gasket, G5 SR Gasket]

• Finish (See Table I)

Sprinkler Wrench

• Model W3

• Model FC

P/N 9999970421

Fully insert the Model W3 wrench over the cap until it reaches

the bottom of the cup, or the Model FC wrench over the sprinkler

until the wrench engages the body. Do not wrench any other

part of the sprinkler/cup assembly. The Model W3 and FC

wrenches are designed to be turned with a standard 1/2” square

drive. Tighten the sprinkler into the tting after applying a PTFE

based thread sealant to the sprinkler’s threads. Recommended

installation torque is specied in Table J.

Installation Torque Table J

Sprinkler Threads

Recommended Installation

Torque (min. – max.)

ft.lb N.m

½” NPT or ISO7-1R1/28-18 11-24

¾” NPT or ISO7-1R3/414-20 19-27

Do not exceed the maximum recommended torque. Exceeding the

maximum recommended torque may cause leakage or impairment

of the sprinkler. Use care when inserting or removing the wrench

from the sprinkler to avoid damage to the sprinkler.

Install the cover plate by hand, pushing and then turning the cover

in the clockwise direction until it is tight against the ceiling. For

Model G5 QR Gasket and Model G5 SR Gasket cover plates, the

gasket should be attached to the flange of the cover plate skirt

only. Do not glue the gasket in place or allow the gasket to overlap

both the cover plate and the flange of the skirt.

Maintenance

Reliable Model G5 series sprinkler should be inspected and the

sprinkler system maintained in accordance with NFPA 25, as well

as the requirements of any Authorities Having Jurisdiction.

Prior to installation, sprinklers should remain in the original cartons

and packaging until used. This will minimize the potential for

damage to sprinklers that could cause improper operation or non-

operation.

Do not clean sprinklers with soap and water, ammonia liquid or any

other cleaning fluids. Remove dust by gentle vacuuming without

touching the sprinkler.

Model FC

For use with Model G5 Series sprinklers

without wrench-able cap installed

Wrench

Model W3

For use with Model G5 Series sprinklers with

wrench-able cap installed

Bulletin 034

May 2022

Page 9 of 9

www.reliablesprinkler.com

Andere Handbücher für G5 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable DH80 Dry Bedienungsanleitung

Reliable

Reliable JL-17 Bedienungsanleitung

Reliable

Reliable RFC56 Bedienungsanleitung

Reliable

Reliable F3-56 Series Bedienungsanleitung

Reliable

Reliable HL22 Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Bedienungsanleitung

Reliable

Reliable JL-14 Bedienungsanleitung

Reliable

Reliable F1 56 Bedienungsanleitung

Reliable

Reliable F1FR LO Series Handbuch

Reliable

Reliable F1 LO Bedienungsanleitung

Reliable

Reliable F1-SS Series Bedienungsanleitung

Reliable

Reliable G Series Handbuch

Reliable

Reliable F1FR – 300 Bedienungsanleitung

Reliable

Reliable F1FR-SS Series Bedienungsanleitung

Reliable

Reliable F1FR80VdS Series Handbuch

Reliable

Reliable G Bedienungsanleitung

Reliable

Reliable F1FR-FS56 Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Bedienungsanleitung

Reliable

Reliable F1FR 300 QREC Handbuch

Reliable

Reliable F1 LO Handbuch

Reliable

Reliable F1 Res 30 LL Bedienungsanleitung

Reliable

Reliable DH56 HSW-PL Handbuch

Reliable

Reliable F3-80 Series Handbuch

Reliable

Reliable GFR Series Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung