Reliable HL22 Handbuch

Model Nominal K-factor

gpm/psi1/2 (L/min/bar1/2)Approvals Sprinkler Identificaiton

Number (SIN)

HL22 22.4 (320) cULus, FM, LPCB, VdS RA1011

Model HL22 ESFR Pendent Sprinkler Table A

Model HL22 ESFR Sprinkler

Model HL22 Sprinkler w/

Victaulic® IGS™ Style V9

Sprinkler Coupling

Features

• cULus, VdS, and LPCB listed as an ESFR sprinkler

• FM Approved as a quick-response, storage and non-

storage sprinkler

• Fusible link operating element

Product Description

The Reliable Model HL22 is an Early Suppression

Fast Response (ESFR) Sprinkler with a nominal K-factor of 22.4

(320 metric). The sprinklers use a levered fusible alloy solder

link in either a 165°F (74°C) or a 212°F (100°C) temperature

rating. These sprinklers are designed to respond quickly

to growing fires and will deliver a heavy water discharge to

“suppress” rather than “control” fires.

FM Approvals classifies the Model HL22 as a quick-response

sprinkler, storage and non-storage, when used in accordance

with FM Global Property Loss Prevention Data Sheets.

In addition to the design criteria provided in NFPA 13, the Model

HL22 also has a Specific Application UL listing for 45’ storage

of Class I - IV and cartoned unexpanded Group A plastic in a

48’ building (reference Table C for full details).

The HL22 sprinklers are available with 1” NPT or ISO7 R-1

threads, and also with the Victaulic® IGS™ Style V9 Sprinkler

Coupling*.

*Note: Victaulic® and IGS™ are trademarks of Victaulic

Company.

www.reliablesprinkler.com

Model HL22 ESFR

Pendent Sprinkler

175 psi (12 bar) rated

Bulletin 010 August 2020

Model HL22 ESFR Sprinkler SIN RA1011

Technical Specifications

Style: Pendent

Connection: 1” NPT or ISO7 R-1 threads, IGS™

Style V9 Sprinkler Coupling

Nominal K-Factor: 22.4 (320)

Max. Working Pressure: 175 psi (12 bar)

Material Specifications

Thermal Sensor: Beryllium Nickel Solder Link

Sprinkler Frame: Brass Casting

Button: Copper Alloy

Sealing Assembly: Nickel with PTFE

Load Screw: Bronze

Deflector: Bronze

Levers: Stainless Steel

Ejection Spring: Stainless Steel

Sprinkler Finishes

Standard (Brass Only)

Sensitivity

Fast-Response (cULus)

Quick-Response (FM)

Temperature Ratings

Ordinary: 165°F (74°C)

Intermediate: 212°F (100°C)

Guards and Shields (for threaded sprinklers only)

K22 Guard (Intermediate level ONLY)

S-5 Shield (Intermediate level ONLY)

Sprinkler Wrench

Model W5

Listings and Approvals

cULus

FM Approved

LPCB

VdS

Model HL22 Sprinkler Components and Dimensions Figure 1

Model HL22 ESFR Sprinkler with Model 22 Guard (ONLY for intermediate level use on threaded sprinklers) Figure 2

Bulletin 010

August 2020

Page 2 of 5

www.reliablesprinkler.com

Storage Type NFPA FM GLOBAL

Sprinkler Type ESFR Storage

Response Type ESFR Quick Response

System Type Wet Wet

Temperature Rating °F (°C) 165 (74), 212 (100) 165 (74), 212 (100)

Roof Construction See NFPA 13 See FM Global 2-0

Ceiling Slope See NFPA 13 See FM Global 2-0

Maximum Coverage Area See NFPA 13 See FM Global 2-0

Minimum Coverage Area See NFPA 13 See FM Global 2-0

Maximum Spacing See NFPA 13 See FM Global 2-0

Minimum Spacing See NFPA 13 See FM Global 2-0

Minimum Clearance to Commodity See NFPA 13 See FM Global 2-0

Sprinkler Distance to Ceiling See NFPA 13 See FM Global 2-0

Open Frame, Single, Double, Multiple

Row, or Portable Rack Storage of Class

I - IV Commodity and Group A Plastic

See NFPA 13 See FM 2-0 & 8-9

Solid Pile or Palletized Storage of Class

I - IV Commodity and Group A Plastic See NFPA 13 See FM 2-0 & 8-9

Idle Pallet Storage See NFPA 13 See FM 2-0, 8-9 & 8-24

Rubber Tire Storage See NFPA 13 See FM 2-0 & 8-3

Rolled Paper Storage See NFPA 13 See FM 8-21

Flammable Liquid Storage See NFPA 30 See FM 7-29

Aerosol Storage See NFPA 30B See FM 7-31

Auto Components in Portable Racks N/A N/A

Model HL22 ESFR Commodity Selection and Design Criteria Overview Table B

Bulletin 010

August 2020

Page 3 of 5

www.reliablesprinkler.com

Bulletin 010

August 2020

Page 4 of 5

www.reliablesprinkler.com

Model HL22 Commodity Selection and Design Criteria Overview Specific Application Listing (UL) Table C

Description UL Specific Application Criteria

Sprinkler Type ESFR

Temperature Rating °F (°C) 212 (100)

Response Type ESFR

System Type Wet

Maximum Area of Coverage See NFPA 13

Minimum Area of Coverage See NFPA 13

Maximum Slope Ceiling See NFPA 13

Maximum Spacing See NFPA 13

Minimum Spacing See NFPA 13

Deflector Distance from Walls See NFPA 13

Deflector to Top of Storage See NFPA 13

Deflector to Ceiling Distance 6"- 14" (150-350mm)

Maximum Ceiling Height 48ft (14.6m)

Maximum Storage Height 43ft (13.1m)

Storage Arrangement Single and double row rack storage, palletized and solid

pile storage. No open top containers or solid shelves.

Commodity Class I-IV commodities, encapsulated or nonencapsulated,

and Cartoned Group A Unexpanded plastics

Sprinkler System Design 55 PSI (3.8 bar) design pressure,12 sprinklers in remote area

Obstruction Criteria See NFPA 13

Minimum Aisle Width 8ft (2.4m)

Hose Stream Allowance and Duration See NFPA 13

Installation

Model HL22 sprinklers are intended for installation in

accordance with NFPA 13 and FM Loss Prevention Data Sheets

2-0 and 8-9, as well as the requirements of any Authorities

Having Jurisdiction. See Table B for information on NFPA and

FM Global design criteria for the Model HL22 sprinklers.

For threaded sprinklers only, use the Model W5 sprinkler

wrench for removal and installation (Figure 3). Any other type of

wrench may damage the sprinkler. A grooved wrench boss is

provided on the sprinkler to limit the potential for the wrench to

slip during installation.

Model HL22 sprinklers should be tightened between 14 - 40

lbs-ft (19 - 54 N.m) torque. Do not tighten sprinklers over the

maximum recommended torque. Exceeding the maximum

recommended torque may cause leakage or impairment of the

sprinklers.

For grooved sprinklers, push the IGS™ Style V9 Sprinkler

Coupling onto the grooved outlet until contact with the center

leg of the gasket occurs. Align the sprinkler frame arms and

the pads of the coupling with the sprinkler piping and tighten

the coupling until the pads of the coupling meet. For additional

information, please reference Victaulic® technical bulletin I-V9.

Caution: When handling sprinklers, hold sprinklers only by the

frame arms and do not apply any force on the link assembly.

Damaged sprinklers must be replaced immediately.

Maintenance

Reliable Model HL22 sprinklers should be inspected and the

sprinkler system maintained in accordance with NFPA

25, as well as the requirements of any Authorities Having

Jurisdiction.

Prior to installation, sprinklers should remain in the original

cartons and packaging until used. This will minimize the

potential for damage to sprinklers that could cause improper

operation or non-operation.

Do not clean sprinklers with soap and water, ammonia liquid or

any other cleaning fluids. Remove dust by gentle vacuuming

without touching the sprinkler.

Replace any sprinkler which has been painted (other than

factory applied). A stock of spare sprinklers should be

maintained to allow quick replacement of damaged or operated

sprinklers.

Failure to properly maintain sprinklers may result in inadvertent

operation or non-operation during a fire event.

Guarantee

For the Reliable Automatic Sprinkler Co., Inc. guarantee, terms,

and conditions, visit www.reliablesprinkler.com.

Note: 1” S/142 IGS™ grooved welded

outlets are also available from Reliable.

Ordering Information

Specify:

• Sprinkler: [HL22]

• Temperature Rating: [165°F (64°C)] [212°F (100°C)]

• End Connection: [1” NPT] [ISO7 R-1]

[Victaulic® IGS™ Style V9 Sprinkler Coupling]

Victaulic® IGS™ Style V9

Sprinkler Coupling installation

bit - One bit provided in each

box of 25 sprinklers.

Model W5 Sprinkler Wrench Figure 3

Bulletin 010

August 2020

Page 5 of 5

www.reliablesprinkler.com

P/N 9999970287

Inhaltsverzeichnis

Andere Reliable Bewässerungssystem Handbücher

Reliable

Reliable F1-300 Bedienungsanleitung

Reliable

Reliable N25 Bedienungsanleitung

Reliable

Reliable XL Commercial Bedienungsanleitung

Reliable

Reliable J112SS Series Handbuch

Reliable

Reliable N252 Bedienungsanleitung

Reliable

Reliable Pantman F1 Bedienungsanleitung

Reliable

Reliable DD56-6 Handbuch

Reliable

Reliable G5-56 Handbuch

Reliable

Reliable XL Series Bedienungsanleitung

Reliable

Reliable N252 EC Bedienungsanleitung

Reliable

Reliable Concealer G4A Bedienungsanleitung

Reliable

Reliable F1FR56-300 Series Handbuch

Reliable

Reliable DH80 Handbuch

Reliable

Reliable F1-300 Handbuch

Reliable

Reliable F1FR-FS56 Bedienungsanleitung

Reliable

Reliable LT56 Series Bedienungsanleitung

Reliable

Reliable JL-17 Bedienungsanleitung

Reliable

Reliable GFR VELO–ECOH Handbuch

Reliable

Reliable F3QR80 Dry Pendent Bedienerhandbuch

Reliable

Reliable H PrePak Wartungshandbuch

Reliable

Reliable RFC43 LL Benutzerhandbuch

Reliable

Reliable DH56 HSW Bedienungsanleitung

Reliable

Reliable F1 Res 30 LL Bedienungsanleitung

Reliable

Reliable GL 112 Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Hunter

Hunter Institutional Series Bedienungsanleitung

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung

Johnson Controls

Johnson Controls tyco ESFR-17 Bedienungsanleitung

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung