Reliable JL-14 Handbuch
Model JL-17 ESFR Sprinkler
Model JL-17 Sprinkler w/
Victaulic® IGS™ Style V9
Sprinkler Coupling
Model JL-14 ESFR Sprinkler
Model Nominal K-factor
gpm/psi1/2 (L/min/bar1/2)Approvals Sprinkler Identification
Number (SIN)
JL-14 14.0 (200) cULus, FM, VdS, LPCB,
CNBOP-PIB RA1812
JL-17 16.8 (240) cULus, FM, VdS, LPCB,
CNBOP-PIB RA1914
Models JL-14 & JL-17 ESFR Pendent Sprinklers Table A
Features
• cULus, VdS, and LPCB listed as an ESFR sprinkler
• FM Approved as a quick-response, storage and non-
storage sprinkler
• Fusible link operating element
• Compact design
Product Description
The Reliable Models JL-14 and JL-17 are Early Suppression
Fast Response (ESFR) Sprinklers with nominal K-factors of 14.0
(200 metric) and 16.8 (240 metric), respectively. The sprinklers
use a levered fusible alloy solder link in either a 165°F (74°C)
or a 212°F (100°C) temperature rating. These sprinklers are
designed to respond quickly to growing fires and will deliver a
heavy water discharge to “suppress” rather than “control” fires.
FM Approvals classifies the Model JL-14 and JL-17 as quick-
response sprinklers, storage and non-storage, when used in
accordance with FM Global Property Loss Prevention Data
Sheets.
The JL-14 and JL-17 sprinklers are available with 3/4” NPT or
ISO7-1R3/4 (BSPT) threads, and the JL-17 is also available with
the Victaulic® IGS™ Style V9 Sprinkler Coupling*.
Model JL-14 and JL-17 ESFR sprinklers are designed to be
shorter and more compact than other ESFR sprinklers, allowing
greater flexibility with regard to distance from ceilings and
obstructions. The JL-14 and JL-17 ESFR sprinklers are also
less susceptible to damage due to smaller deflector and frame
design. The lighter JL-14 and JL-17 ESFR sprinklers passed
rough use and abuse listing tests without plastic protectors
*Note: Victaulic® and IGS™ are trademarks of Victaulic
Company.
www.reliablesprinkler.com
Model JL-14 & JL-17
ESFR Pendent Sprinklers
175 psi (12 bar) rated
Bulletin 019 June 2020
Model JL-14 Sprinkler Components and Dimensions Figure 1
Model JL-14 ESFR Sprinkler SIN RA1812
Technical Specifications
Style: Pendent
Connection: 3/4” NPT or ISO7-1R3/4 (BSPT)
threads
Nominal K-Factor: 14.0 (200 metric)
Max. Working Pressure: 175 psi (12 bar)
Material Specifications
Operating Element: Brass Alloy
Sprinkler Frame: Brass Alloy
Cap: Bronze Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Deflector: Bronze Alloy
Kick Spring: Stainless Steel Alloy
Sprinkler Finishes
Bronze
Sensitivity
Fast-Response
Quick-Response (FM)
Temperature Ratings
Ordinary: 165°F (74°C)
Intermediate: 212°F (100°C)
Sprinkler Wrench
Model J1
Listings and Approvals
cULus
FM Approved
VdS
LPCB
CNBOP-PIB
Bulletin 019
June 2020
Page 2 of 5
www.reliablesprinkler.com
Model JL-17 ESFR Sprinkler SIN RA1914
Technical Specifications
Style: Pendent
Connection: 3/4” NPT or ISO7-1R3/4 (BSPT)
threads, Victaulic® IGS™ Style V9 Sprinkler
Coupling
Nominal K-Factor: 16.8 (240 metric)
Max. Working Pressure: 175 psi (12 bar)
Material Specifications
Operating Element: Brass Alloy
Sprinkler Frame: Brass Alloy
Cap: Bronze Alloy
Sealing Assembly: Nickel Alloy with PTFE
Load Screw: Bronze Alloy
Deflector: Bronze Alloy
Kick Spring: Stainless Steel Alloy
Sprinkler Finishes
Bronze
Sensitivity
Fast-Response
Quick-Response (FM)
Temperature Ratings
Ordinary: 165°F (74°C)
Intermediate: 212°F (100°C)
Sprinkler Wrench
Model J1
Listings and Approvals
cULus
FM Approved
VdS
LPCB
CNBOP-PIB
Model JL-17 Sprinkler Components and Dimensions Figure 2
Bulletin 019
June 2020
Page 3 of 5
www.reliablesprinkler.com
Storage Type NFPA FM GLOBAL
Sprinkler Type ESFR Storage
Response Type ESFR Quick Response
System Type Wet Wet
Temperature Rating °F (°C) 165 (74), 212 (100) 165 (74), 212 (100)
Roof Construction See NFPA 13 See FM Global 2-0
Ceiling Slope See NFPA 13 See FM Global 2-0
Maximum Coverage Area See NFPA 13 See FM Global 2-0
Minimum Coverage Area See NFPA 13 See FM Global 2-0
Maximum Spacing See NFPA 13 See FM Global 2-0
Minimum Spacing See NFPA 13 See FM Global 2-0
Minimum Clearance to Commodity See NFPA 13 See FM Global 2-0
Sprinkler Distance to Ceiling See NFPA 13 See FM Global 2-0
Open Frame, Single, Double, Multiple
Row, or Portable Rack Storage of
Class I-IV, Cartoned Unexp Plastics
See NFPA 13 See FM 2-0 & 8-9
Solid Pile or Palletized Storage of Class
I - IV and Cartoned Unexp Plastics See NFPA 13 See FM 2-0 & 8-9
Idle Pallet Storage See NFPA 13 See FM 2-0, 8-9 & 8-24
Rubber Tire Storage See NFPA 13 See FM 2-0 & 8-3
Rolled Paper Storage See NFPA 13 See FM 8-21
Flammable Liquid Storage See NFPA 30 See FM 7-29
Aerosol Storage See NFPA 30B See FM 7-31
Auto Components in Portable Racks N/A N/A
Model JL-14 and JL-17 Commodity Selection and Design Criteria Overview Table B
Bulletin 019
June 2020
Page 4 of 5
www.reliablesprinkler.com
Installation
Model JL-14 and JL-17 sprinklers are intended for installation in
accordance with NFPA 13 and FM Loss Prevention Data Sheets
2-0 and 8-9, as well as the requirements of any Authorities
Having Jurisdiction. See Table B for information on NFPA
and FM Global design criteria for the Model JL-14 and JL-17
sprinklers.
For threaded sprinklers only, use the Model J1 sprinkler wrench
for removal and installation. Any other type of wrench may
damage the sprinkler. A grooved wrench boss is provided on
the sprinkler to limit the potential for the wrench to slip during
installation.
When handling sprinklers, hold sprinklers only on frame arms
and do not apply any force on the link assembly. Model JL-14
and JL-17 sprinklers should be tightened between 14 - 40 ft-lbs
(19 - 54 N-m) torque. Sprinklers not tightened to recommended
torque may cause leakage or impairment of the sprinkler.
Damaged sprinklers must be replaced immediately.
For grooved sprinklers, push the IGS™ Style V9 Sprinkler
Coupling onto the grooved outlet until contact with the center
leg of the gasket occurs. Align the sprinkler frame arms and
the pads of the coupling with the sprinkler piping and tighten
the coupling until the pads of the coupling meet. For additional
information, please reference Victaulic® technical bulletin I-V9.
Caution: When handling sprinklers, hold sprinklers only by the
frame arms and do not apply any force on the link assembly.
Maintenance
Model JL-14 and JL-17 ESFR Sprinklers should be inspected
and the sprinkler system maintained in accordance with NFPA
25. Do not clean sprinkler with soap and water, ammonia or
any other cleaning fluid. Replace any sprinkler that has been
painted (other than factory applied) or damaged in any way.
A stock of spare sprinklers should be maintained to allow
quick replacement of damaged or operated sprinklers. Prior
to installation, sprinklers should be maintained in the original
cartons and packaging until used, to minimize the potential for
damage to sprinklers that would cause improper operation or
non-operation.
Once operated, automatic sprinklers cannot be reassembled
and reused. New sprinklers of the same size, type and
temperature rating must be installed. A cabinet of replacement
sprinklers should be provided for this purpose.
Listings and Approvals
1. UL Listed and ULC Certified for Canada (cULus)
2. FM Approved (FM)
3. VdS Certified (VdS)
4. Loss Prevention Certification Board Approved (LPCB)
5. CNBOP-PIB Technical Approval (CNBOP-PIB)
Note: 1” S/142 IGS™ grooved welded
outlets are also available from Reliable.
Guarantee
For the Reliable Automatic Sprinkler Co., Inc. guarantee, terms,
and conditions, visit www.reliablesprinkler.com.
Ordering Information
Specify:
• Sprinkler: [JL-14] [JL-17]
• Temperature Rating: [165°F (64°C)] [212°F (100°C)]
• End Connection: [3/4” NPT] [ISO7-1R3/4 (BSPT)]
[*JL-17 only* Victaulic® IGS™ Style V9 Sprinkler
Coupling]
Victaulic® IGS™ Style V9
Sprinkler Coupling installation
bit - One bit provided in each
box of 25 sprinklers.
Model J1 Sprinkler Wrench Figure 3
Bulletin 019
June 2020
Page 5 of 5
www.reliablesprinkler.com
P/N 9999970379
Dieses Handbuch passt für folgende Modelle
6
Andere Reliable Bewässerungssystem Handbücher
Reliable
Reliable G VELO Pendent Handbuch
Reliable
Reliable F156 Series Bedienungsanleitung
Reliable
Reliable LT56 Series Bedienungsanleitung
Reliable
Reliable RFC56 Bedienungsanleitung
Reliable
Reliable F1-300 Handbuch
Reliable
Reliable G4 Bedienungsanleitung
Reliable
Reliable DH56 Dry Bedienungsanleitung
Reliable
Reliable N25 ESFR Bedienungsanleitung
Reliable
Reliable XL Commercial Bedienungsanleitung
Reliable
Reliable F1FR-FS56 Bedienungsanleitung
Reliable
Reliable KFR-CCS Bedienungsanleitung
Reliable
Reliable DH80 Handbuch
Reliable
Reliable Concealer G4A Bedienungsanleitung
Reliable
Reliable GFR Bedienungsanleitung
Reliable
Reliable RFC43 Bedienungsanleitung
Reliable
Reliable F1 Res 30 LL Handbuch
Reliable
Reliable G5 Series Bedienungsanleitung
Reliable
Reliable F1-42 Series Handbuch
Reliable
Reliable F1-300 Bedienungsanleitung
Reliable
Reliable F1FR Bedienungsanleitung
Beliebte Bewässerungssystem Handbücher anderer Marken
Hunter
Hunter Institutional Series Bedienungsanleitung
Cellfast
Cellfast 52-305 Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product CENTRAL A Bedienungsanleitung
Oral Care Technologies
Oral Care Technologies Hydro Floss Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product Gem F892 Bedienungsanleitung
Toro
Toro 730 Series Kurzanleitung
Eden
Eden 97063-EDAMZ Bedienungsanleitung
Tyco
Tyco TY-L Series Bedienungsanleitung
Tyco Fire Product
Tyco Fire Product CENTRAL ELO-231 Bedienungsanleitung
Johnson Controls
Johnson Controls tyco ESFR-17 Bedienungsanleitung
Victaulic
Victaulic VicFlex I-VICFLEX.AQC-U Bedienungsanleitung