Remington Titanium EZ TRIM Bedienungsanleitung

For the

Easiest

Haircut

Ever!

GCT-2000

Use and Care Guide

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance,

basic precautions should always be

observed, including the following.

Read all instructions before using this

appliance.

DANGER

To reduce the risk of electric shock:

■Do not reach for an appliance that

has fallen into water. Unplug it

immediately.

■Do not use while bathing or in

the shower.

■Do not place or drop into water

or other liquid.

■Do not place or store this appliance

where it can fall or be pulled into a

tub or sink.

■Except when charging, always

unplug this appliance from the

electrical outlet immediately

after using.

■Unplug this appliance before

cleaning it.

WARNING

To reduce the risk of burns, fire,

electric shock or injury to persons:

■This appliance is for household

use only.

■An appliance should never be left

unattended when it’s plugged in,

except when charging a recharge-

able appliance.

■Close supervision is necessary

when this appliance is used by,

on, or near children or invalids.

■Use this appliance only for its

intended use as described in this

manual. Do not use attachments

not recommended by Remington®.

■Keep the cord away from heated

surfaces.

■Never operate this appliance if it

has a damaged cord or plug, if it is

not working properly, if it has been

dropped or damaged, or if it has

been dropped into water. If any

of these things happen, return

the appliance to a Remington®

authorized service center for

examination and repair.

■Never drop or insert any object into

any of the appliance’s openings.

■Do not use outdoors or operate

where aerosol (spray) products

are being used, or where oxygen

is being administered.

■Always store this appliance and

cord in a moisture-free area.

Make sure the cord is disconnect-

ed from the clipper.

■Do not use this appliance with a

damaged or broken cutter unit,

as injury may occur. Always make

sure blades are aligned properly.

■Always attach plug to appliance,

then adapter to outlet. To discon-

nect, turn all controls to OFF,

then remove adapter from outlet,

then detach power cord from

the clipper for storage.

Contents

English ................................ 1

Spanish ........................... 13

French .............................. 25

■Dispose of used batteries properly.

Do not incinerate. Batteries may

explode if overheated. Do not wrap

in metal or aluminum foil. Wrap

in newspaper before discarding.

It is suggested that you contact

local battery redemption site(s)

in your area.

■Do not attempt to recharge

alkaline, heavy-duty, or regular

batteries in a nickel-cadmium

battery charger.

SAVE THESE INSTRUCTIONS

Product Features

Congratulations on your purchase of one of the finest hair clippers available today.

Your Remington®EZ TRIM hair clipper is designed to perform dependably and efficiently

for years, helping you maintain a range of hair styles.

(A) Adjustable trimmer guard

attachment

(B) Zoom wheel

(D) Charging indicator (Green)

(E) Low-battery indicator (Red)

(F) Power cord adapter

(G) Scissors

(H) Barber's comb

(I) Neck brush

(J) Instruction book

(K) Storage pouch

(L) Cleaning brush

(M) Mustache brush

(N) Sectioning clips

Clipper Parts

(A)

(B)

(D) (E)

(G)

(H)

(C)

(F)

(J)

(K)

(I)

A 9-position Zoom Wheel provides the greatest

choice of cutting lengths for a consistent trim every

time. Adjust the trimming length by rotating the

Zoom Wheel to the desired position number. Refer to

the chart below for the position number of your

desired hair length.

9-position Zoom Wheel

1 2 3 4 5 6 7 8 9

1.5 mm

0.06"

2.5 mm

0.1"

4 mm

0.16"

5.5 mm

0.22"

7 mm

0.28"

9 mm

0.35"

1 1 mm

0.43"

1 4 mm

0.55"

1 8 mm

0.71"

SETTING

LENGTH

(L)

(M) (N)

For the

Easiest

Haircut

Ever!

GCT-2000

Use and Care Guide

How to Use

Charging/Recharging

To recharge, use only the charging

adapter provided.

■Turn the clipper off. Insert the adapter

plug into the bottom of the clipper, then

plug the adapter into an electric outlet.

The charging indicator will glow green,

indicating the unit is charging. A full

charge will take approx. 14-16 hours.

The low-battery indicator will glow red

when the clipper needs to be recharged.

■Your clippper cannot be overcharged. You

may leave it plugged in between uses.

However, if the clipper is not going to be

used for an extended period (2 weeks),

unplug the unit and recharge when

resuming use.

■Charge the clipper at temperatures

between 40-90˚F to avoid adversely

affecting battery life.

Blade Care

The life of your clippers will depend on

frequency of use, care, and hair type and

condition. The EZ TRIM’s blades are lubed

for life and do not require additional oil.

Blades should be replaced when cutting

efficiency has deteriorated. Contact a

Remington Service Center for a quotation.

Before Cutting Hair

1. Make sure your hair clipper is running

smoothly, with a slight vibration.

The person should be seated so that the

top of his head is at your eye level.

3. Comb the hair as it is normally styled.

4. Comb out all knots and tangles.

5. Ensure the hair is dry. Hair clippers per-

form best with dry hair, making it easier

to see how much hair is being cut.

6. Hold the hair

clipper in the

palm of one

hand with your

thumb resting

firmly on the

top of the hair

clipper. This grip

provides com-

fortable cutting

control.

Storage

■Always store this appliance and cord-

adapter in a moisture-free area. Do not

store it

in temperatures exceeding 140°F

(60°C).

■Do not wrap the cord around the

appliance.

This appliance has no user serviceable

parts. For any other servicing contact an

authorized Remington®Service Center.

Selecting Hair Length Setting

The EZ TRIM’s adjustable trimmer attach-

ment lets you change trim lengths simply

by rolling the clipper’s Zoom Wheel.

■Roll the Zoom

Wheel toward

the top of the

clipper to adjust

for longer

length, and

toward the

bottom of the

clipper for

shorter length.

The wheel will

click into one of

9 positions.

■Begin trimming

at one of the

longest settings (#8 or #9) to avoid

accidentally trimming hair too short. As

you become familiar with the settings,

you can then select your desired length

setting.

Trimmer Guard Attachment

NOTE: Trimmer guard must be attached to

the clipper in order to use the hair length

selector.

Remove trimmer guard attachment if you

are defining hairline edges such as sideburns,

trimming the nape of your neck, trimming

your beard line on front of neck, or if you

want to clean the cutter assembly.

To remove:

■Be sure the

clipper is in the

OFF position.

■While holding

clipper in one

hand and hold-

ing the Zoom

Wheel to pre-

vent it from

turning, gently

pull the trimmer

guard attach-

ment away

from the clip-

per. The guard can be removed and

replaced on any setting.

To replace:

■Be certain clipper is in OFF position.

■While holding the clipper in one hand,

and holding the Zoom Wheel to prevent

it from turning, slide the guard over

the top of the clipper until it clicks

into position.

NOTE: The trimmer guard attachment can

only be placed on the clipper one way; if it

does not fit properly, remove and reverse it.

TITANIUM

3. To cut the hair

at the top of the

head, hold the

hair between

your fingers and

cut a small

amount at a

time. Cut from

the front to the

back.

4. To trim around

the ears and

short hairs at

the nape of the

neck you must

remove the

trimming guard.

Angle the clip-

per and lightly

stroke around

each ear to the

back of the neck. Be careful not to

touch the ears or to press too hard.

5. The final trim can be made with the hair

clipper or the included scissors. Make

sure to check over the entire head for

any uneven areas. For styled hair or

giving quick trims, you may prefer using

your hair clipper without the trimming

guide.

Usage Tips

Giving a Comfortable,

Even Cut

Allow the clipper to cut through the hair

without moving it too quickly. Moving the

clipper too quickly may create a pulling

sensation.

Use short strokes when cutting, and initially

use the longest setting. You can always use

a closer setting later if you want a closer cut.

How to Give a Haircut

1. Start at the back of the head. Holding the

clipper as shown, lightly stroke upward

making sure you are taking off the

desired amount

of hair. Work

your way up to

the crown of the

head in layers.

When complet-

ed, comb the

area to remove

any loose hair

and to deter-

mine whether

you need any further cutting.

2. Repeat the same procedure for each side

of the head. Make sure the length of the

hair is trimmed to the same length on

both sides of the head.

Very short styles

1. Using a shorter setting (#1 or #2), hold

the comb flat against the head and move

the hair clipper from the back of the

neck to the crown of the head.

2. Cut in a similar manner from the side to

the top of the head. Then cut from the

front to the crown of the head.

3. If a “Flat Top”

style is desired,

remove the

trimming guide

and use the

barber’s comb.

Trim a little at a

time until a flat

look is

achieved.

Trimming Beards & Mustaches

1. Comb your

beard in the

direction it

grows.

2. Determine the

length you want

the beard to

remain, and

choose the

corresponding

setting.

Remember the 1.5mm (#1) guide will

give you the shortest beard while the

14mm (#8) or 18mm (#9) will give you

the longest. If you want a longer beard

you can use the barber’s comb as a

trimming guide.

3. Start trimming under your chin and work

toward your ear and beard line. Cut in

different directions for a uniform trim.

4. Lightly stroke the edge of your mustache

in a downward movement.

Disposal

Battery Removal

When your recharge-

able clipper reaches

the end of its useful

life, the batteries

must be removed

and recycled or

disposed of properly

in accordance with your local and state

requirements.

The following procedure should be

followed for battery removal:

■Make sure your clipper

is unplugged from any

outlets so you don’t risk

an electric shock.

■Remove the clipper

guard and remove

the blade assembly.

■Using a small Phillips

head screwdriver,

remove the 4 screws

from the clipper’s back

cover.

■Remove the metal spring

clip using a screwdriver

or pliers. Face unit away

from you when removing.

■Pull or gently pry the clipper halves

apart, exposing the batteries.

■Pull or pry batteries from PC board.

■Twist batteries to break wires. Wires

may also be cut.

BATTERY MUST BE RECYCLED

OR DISPOSED OF PROPERLY.

Ni-Cd

CONTAINS NICKEL-

CADMIUM BATTERY.

CAUTION: THESE NICKEL-CADMIUM

BATTERIES MUST BE RECYCLED

OR DISPOSED OF IN ACCORDANCE WITH

STATE AND LOCAL REGULATIONS.

Do not burn or mutilate, as they may burst

or release toxic materials. Do not short-

circuit, as this may cause burns.

The EPA-certified RBRC®Battery Recycling

Seal on the nickel-cadmium (Ni-Cd) battery

indicates Remington Products Company,

L.L.C. is voluntarily participating in an

industry program to collect and recycle

these batteries at the end of their useful

life, when taken out of service in the United

States or Canada. The RBRC®program

provides a convenient alternative to placing

used Ni-Cd batteries into the trash or the

municipal waste stream, which may be

illegal in your area. Please call

1-800-8-BATTERYSM for information on

Ni-Cd battery recycling and disposal

bans/restriction in your area. Remington

Products Company, L.L.C.’s involvement

in this program is part of our commitment

to preserving our environment and

conserving our natural resources.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Remington Elektrorasierer Handbücher

Remington

Remington MicroFlex 200 R-830 Bedienungsanleitung

Remington

Remington MB4120 Bedienungsanleitung

Remington

Remington i-Light PRO Face&Body IPL6000FAU Bedienungsanleitung

Remington

Remington VERSO XR1400 Bedienungsanleitung

Remington

Remington R-3130 Bedienungsanleitung

Remington

Remington MB4010 Bedienungsanleitung

Remington

Remington XR1330 Bedienungsanleitung

Remington

Remington MPT-3400 Bedienungsanleitung

Remington

Remington Trim & Shape BKT-2000 Bedienungsanleitung

Remington

Remington G3 Graphite Series Bedienungsanleitung

Remington

Remington Precision NE-1 Bedienungsanleitung

Remington

Remington R4001 Bedienungsanleitung

Remington

Remington X9 Bedienungsanleitung

Remington

Remington WSF5060 Bedienungsanleitung

Remington

Remington Precision MB-10 Bedienungsanleitung

Remington

Remington MB4110 Bedienungsanleitung

Remington

Remington R4 Style Series Bedienungsanleitung

Remington

Remington Titanium PG-350 Bedienungsanleitung

Remington

Remington MB4115AU Bedienungsanleitung

Remington

Remington ROTARY SHAVER Bedienungsanleitung

Remington

Remington SMOOTH AND SILKY WPG-4030 Bedienungsanleitung

Remington

Remington R4500AU Bedienungsanleitung

Remington

Remington TouchTech MB4700 Bedienungsanleitung

Remington

Remington Smooth & Silky WDF-4815 Bedienungsanleitung

Beliebte Elektrorasierer Handbücher anderer Marken

Philips

Philips MicroAction 4402LC Bedienungsanleitung

Philips

Philips HQ7740 Bedienungsanleitung

Philips

Philips Norelco BG2022 Bodygroom Bedienungsanleitung

Norelco

Norelco Quadra 7610X Bedienungsanleitung

Philips

Philips 7616X Bedienungsanleitung

Philips

Philips HQ802 Bedienungsanleitung

Philips

Philips HQ7363/17 Bedienungsanleitung

Braun

Braun WaterFlex WF2s Bedienungsanleitung

Philips

Philips NORELCO S7371 Bedienungsanleitung

Daga

Daga MT-400 Handbuch

Philips

Philips Bodygroom BG2000 Bedienungsanleitung

Kompernass

Kompernass KH 5537 Bedienungsanleitung

Philips

Philips qc5365 Bedienungsanleitung

MIA

MIA Aqua Body Bedienungsanleitung

Philips

Philips NORELCO AT880 Bedienungsanleitung

Matheo

Matheo MLR 15 Bedienungsanleitung

Philips

Philips 7735X Bedienungsanleitung

Braun

Braun silk-epil 5 Bedienungsanleitung