Remington PRO POWER HC5150 Bedienungsanleitung

All technical modiﬁcations reserved. 09/08.TSC 08.0634

REMINGTON®is a Registered Trade Mark of Spectrum Brands, Inc.,

or one of its subsidiaries VARTA Consumer Batteries GmbH & Co. KGaA

Alfred-Krupp-Str.9

73479 Ellwangen

Germany

www.remington-europe.com

Model No. HC5150

10/UK/HC5150 Version 03/10 Part No. T22-29458

HC5150

HAIR CLIPPER

35232:(5

REMINGTON®SERVICE HOTLINE

United Kingdom

+44 0800 212 438 (free call)

Rayovac Europe Ltd,

Watermans House, Kingsbury Crescent,

The Causeway, Staines, Middlesex,

TW18 3BA, UNITED KINGDOM

www.remington.co.uk

1. 2.

5.4.

ENGLISH

Thank you for choosing Remington®. Our products are designed to meet the

highest standard of quality, functionality and design. We hope you enjoy using

your new Remington® product.

Please read the instructions for use carefully and keep in a safe place for future

reference.

CAUTION

Use this appliance only for its intended use as described in this manual.

Do not use attachments not recommended by Remington®.

Do not use this product if it is not working correctly, if it has been dropped or damaged,

or dropped into water..

DESCRIPTION

1. On/Off switch

2. Blade set

Charging indicator light

Charging adaptor

2 attachment guide combs

Your clipper cannot be overcharged. However, if the product is not going to be used for an

extended period time (2-3 months), unplug it from the mains and store.

Fully recharge your hairclipper when you would like to use it again.

To preserve the life of your batteries, let them run out every six months then recharge for

14-16 hours.

GETTING STARTED

CHARGING YOUR HAIRCLIPPER

Before using your hair clipper for the ﬁrst time, charge for 14-16 hours

Connect the charging adaptor to the product and then to the mains.

Ensure the product is switched off.

When the cord is connected to the mains, the charging indicator light will light up.

CORDED USE

Connect the charging adaptor to the product and then to the mains.

CAUTION: Extended mains only use will result in the reduction of the battery life.

CORDLESS USE

ENGLISH

When the cord is connected to the mains, the charging indicator light will light up.

When the unit is switched on and fully charged, the product will provide you with

a usage time of 30 minutes which will decrease during usage.

HOW TO USE

Before starting the cut

Inspect the clipper making sure that it is free from hair and dirt.

Seat the person so that their head is approximately at your eye level.

Before cutting, always comb the hair so it is tangle free and dry.

To attach a comb

Hold the comb with its teeth upward

Slide it onto and along the track of left and right side of the housing unit, the front of the combs

firmly sits against the clipper blade.

Comb position comb comb

1 mm 2 mm

2 mm 2 mm

3 9 mm mm

4 1 mm

5 1 mm mm

6 1 mm mm

7 mm mm

Short Long

To remove the comb

Holding the clipper with the blades facing away from you, ﬁrmly push the comb upward

and away from the blades.

The comb attachment is marked accordingly on its outside middle surface.

(3-21mm & 24-42mm)

1mm length is achieved without any combs.

ENGLISH

INSTRUCTIONS FOR HAIR CUTTING

Note: For even cutting, allow the comb attachment/blade to cut its way through the hair.

Do not force it through quickly. If you are cutting for the ﬁrst time, start with the maxi-

mum comb attachment.

STEP 1 – Nape of the neck – PICTURE 1

Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of the

head at the base of the neck.

Slowly lift the clipper, working upwards and outwards through the hair, trimming just a

little at a time.

STEP 2 – Back of the head – PICTURE 2

Set the comb attachment to 3mm or 6mm.

With the comb attachment set on 12mm or 18mm, cut the hair at the back of the head.

STEP 3 – Side of the head – PICTURE 3

Set the comb attachment to 3mm or 6mm guide to trim sideburns. Then change the setting to

9mm and continue to cut to the top of the head.

SHORT TAPERED STYLES – “FLAT TOPS” & SHORT CUTS

Starting with the longest

comb attached (

), cut from the back of the neck to

the crown. Hold the guide comb ﬂat against the head and slowly move the clipper through

the hair, as shown. (PICTURE 1)

Use the same procedure from the lower side to the upper side of the head, as illustrated.

Then cut the hair against the direction in which it grows and level with the sides.

(PICTURE 3)

To give a “ﬂat top” look, the hair on top of the head must be cut over the top of a ﬂat

comb.

Use a closer guide comb to taper the hair down to the neckline as desired.

STEP 5 – The ﬁnishing touches – PICTURE 5

Use the clipper without an attachment comb for close trimming around the base and sides

of the neck. Use the ear comb guides to get a clean line around each ear. For the required

ear comb guide, angle the clipper and lightly stroke around each ear to the back of the

neck.

To produce a clean straight line at the sideburns, reverse the hair clipper. Place the

reversed clipper at right angles to the head, tips of the blades lightly touching the skin and

then work downwards.

24mm-42

Always work from the back of the head.

Use the longer length comb attachment and set it to 24mm or 27mm

then cut hair on top of the head against the direction in which the hair normally grows.

STEP 4 – Top of the head – PICTURE 4

For longer hair on top, use the longer length comb attachment (24-42mm) to achieve desired style.

ENGLISH

AFTER EACH USE

Ensure the clipper is switched off and disconnected from the mains.

Brush the accumulated hair from the blades. Do not submerge the clipper in water.

To clean the unit, wipe with a damp cloth and dry immediately.

Note: Ensure that the clipper is turned off when cleaning.

EVERY SIX MONTHS

At regular intervals the Blade Set should be removed and cleaned.

Remove the 2 screws retaining the ﬁxed blade with a screwdriver. Do not remove blade

set.

Brush out hairs from between the blades with soft cleaning brush. Do not remove the

lubricating grease from the blades. It is not necessary to remove the small moving blade

from the unit.

Note: Ensure that the hair clipper is turned off when cleaning.

Note that if the blades are not correctly aligned then cutting efﬁciency will be impaired.

Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.

CAUTION:

Do not use liquid cleaners on the blades or harsh or corrosive chemicals on the blade

casing. Always use a soft brush to remove the accumulated hairs.

Unplug the charge adaptor from the power outlet when ﬁtting or removing attachments,

or while cleaning the product.

Always store this appliance and cord in a moisture-free area.

Do not wrap the cord of the charging adaptor around the appliance.

If the moving blade has been removed this can be re-ﬁtted by slotting the coated blade

holder over the pin in the centre of the interior product head. The groove on the coated

blade, just below the teeth, rests on a metal plate at the opposite side to the screw holes.

The ﬁxed blade is ﬁtted with the raised proﬁle pointing outwards and ﬁxed with the 2

screws.

CARE FOR YOUR HAIRCLIPPER

Your clipper is ﬁtted with high quality

blades

ensure long lasting performance of your clipper, clean the blades and unit regularly.

Always keep the attachement guide comb on the trimmer blade.

CLEANING CAUTIONS

Only the adjustable trimmer comb and cutter assembly may be removed from the

rimmer for cleaning.

Cleaning should only be done with a soft brush, such as the brush supplied with the

product.

Only use the light-grade oil supplied or sewing machine oil on the blades.

Do not use harsh or corrosive cleaners on the units or their cutters.

Do not apply pressure or hard objects to cutters.

Do not disassemble cutter assembly.

Do not submerge in water as damage will occur.

Gently brush the remaining hairs away from the trimmer comb and trimmer blade.

Do not rinse the cutter assembly under water.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR

INJURY TO PERSONS:

An appliance should never be left unattended when plugged into a power outlet.

Keep the power plug and cord away from heated surfaces.

Make sure the power plug and cord do not get wet.

Do not use the product with a damaged cord. A replacement can be obtained via

the nearest Remington®Service Centre.

Charge, use and store the product at a temperature between 15°C and 35°C.

Always unplug from the mains when cleaning.

Only use the parts supplied with the appliance.

Keep this product out of reach of children. The use of this appliance by persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge can

give cause to hazards. Persons responsible for their safety should give explicit instructions

or supervise the use of the appliance.

PROTECT THE ENVIRONMENT

The product contains a Nickel Metal Hydride cell unit. Do not dispose the trimmer in

household waste at the end of its useful life. Disposal can take place at our service centres

or appropriate collection sites.

CAUTION:

Do not put in ﬁre or mutilate your battery packs as they may burst

or release toxic materials.

For further information on recycling see www.remington-europe.com

Do not plug or unplug the product with wet hands.

The trimmer is not washable. If it falls into water, ensure the power outlet is switched off

before removing.

ENGLISH

BATTERY REMOVAL

SERVICE & WARRANTY

This product has been checked and is free of defects. We warrant this product against any

defects that are due to faulty material or workmanship for a 2 year period from the original

date of consumer purchase. If the product should become defective within the warranty

period, we will repair any such defect or elect to replace the product or any part of it

without charge provided there is proof of purchase. This does not mean an extension of the

warranty period.

In the case of a warranty simply call the Remington®Service Center in your region.

This warranty is offered over and above your normal statutory rights.

The warranty shall apply in all countries in which our product was sold via an authorised

dealer.

This warranty does not include cutters which are consumable parts. Also not covered is

damage to the product by accident or misuse, abuse, alteration to the product or use incon-

sistent with the technical and/or safety instructions required. This warranty shall not apply if

the product has been dismantled or repaired by a person not authorised by us.

The battery must be removed from the appliance before it is scrapped

The appliance must be disconnected from the supply mains when removing the battery

Ensure the clipper is discharged of all power and disconnected from the mains

Lift or pry the screw cover and unscrew 1 screw located on the back housing of the clipper

Life or pry the clipper halves apart, exposing the battery on the printed circuit board

Cut the tabs on both ends of the battery and remove it from the printed circuit board

The battery is to be disposed of safety

Andere Handbücher für PRO POWER HC5150

Inhaltsverzeichnis

Andere Remington Haarschneider Handbücher

Remington

Remington HC4000AU Bedienungsanleitung

Remington

Remington Indestructible HC5880 Bedienungsanleitung

Remington

Remington HC500 Bedienungsanleitung

Remington

Remington HC650 Bedienungsanleitung

Remington

Remington HC9700 Bedienungsanleitung

Remington

Remington ColourCut HC5038 Bedienungsanleitung

Remington

Remington HC-5030 Bedienungsanleitung

Remington

Remington ProPower HC5200 Bedienungsanleitung

Remington

Remington HC4250 Bedienungsanleitung

Remington

Remington X4 Power-X Series Bedienungsanleitung

Remington

Remington HC9700 Bedienungsanleitung

Remington

Remington HC06A Bedienungsanleitung

Remington

Remington HighPrecision HC-600 Bedienungsanleitung

Remington

Remington HC4250AU Bedienungsanleitung

Remington

Remington PrecisionCut HC5500 Bedienungsanleitung

Remington

Remington HC335 Bedienungsanleitung

Remington

Remington PG6032 Bedienungsanleitung

Remington

Remington HC5888 Bedienungsanleitung

Remington

Remington PRECISION PERFORMER HC2000AU Bedienungsanleitung

Remington

Remington PRO POWER HC5150 Bedienungsanleitung

Remington

Remington X3 POWER-X Series Bedienungsanleitung

Remington

Remington HC-822A Bedienungsanleitung

Remington

Remington HC366AU Bedienungsanleitung

Remington

Remington ColourCut HC5038 Bedienungsanleitung

Beliebte Haarschneider Handbücher anderer Marken

Clatronic

Clatronic HSM 800 Bedienungsanleitung

Mellerware

Mellerware MACRO ALDANY MA20001 Bedienungsanleitung

VALERA

VALERA X-Master 652 Bedienungsanleitung

Wahl

Wahl 1870Li Bedienungsanleitung

Lister

Lister Legend Bedienungsanleitung

Philips

Philips HC5440/80 Bedienungsanleitung

Andis

Andis MBA 23125 Bedienungsanleitung

Philips

Philips Philishave HQC488/61 Bedienungsanleitung

Shear Magic

Shear Magic Nifty 1800 Bedienungsanleitung

Philips

Philips QC5390 Bedienungsanleitung

Andis

Andis US-1 Kurzanleitung

Panasonic

Panasonic EH-KA81 Bedienungsanleitung

Philips

Philips HC5450 Bedienungsanleitung

Andis

Andis US-1 Montageanleitung

Andis

Andis ML Montageanleitung

O'Barber

O'Barber MINI SLIDE Bedienungsanleitung

Oster

Oster 76110 Bedienungsanleitung

Hyundai

Hyundai HC 420 Bedienungsanleitung