Renesas Starter Kit+ Bedienungsanleitung

NOTE: This Quick Start Guide covers installation of the DS-5 DVD.

1. Installation

Do not connect the JLINK LITE ARM debugger module until the software support has been installed.

1. Insert the DVD into your computer’s DVD-ROM drive. The DVD should automatically run the installation program. If

the installer does not start, browse to the DVD root folder and double click on ‘setup.exe’.

2. Windows™7/ 8 users may see “User Account Control” dialog box. If applicable, enter the administrator password

and click ‘Yes’.

3. The installer welcome screen will open. Follow the on-screen instructions to install the RSK software. This process

will take several minutes.

Note:

You will be prompted to obtain a product activation code by logging onto the My Renesas website. Please follow the on

screen instructions.

When prompted to specify a different location for installing any of the tools, it is recommended that default entries are

accepted.

The Windows™ driver signing dialog box may be displayed. Please accept the driver to continue.

Select the option to update the ARM DS-5 dll if prompted by the SEGGERJ-LINK DLL Updater.

2. Connection

4. Connect the JLINK LITE ARM debugger module to the connector marked ‘CN14 ARM JTAG 20’ on the diagram

using the ribbon cable.

5. Connect the JLINK LITE ARM debugger module to a spare USB port of your PC. The green LED on the debugger

will flash.

6. Please follow the steps below to install the drivers. Note that administrator privileges are required to install the

drivers. Windows™ 7 / 8

WindowsTM 7: A “Device driver software installed successfully” pop-up will appear in the Windows™

toolbar and installation will complete.

WindowsTM 8: An icon will appear in the WindowsTM toolbar and installation will complete.

7. The green LED on the JLINK LITE ARM debugger will illuminate.

8. Ensure that SW6.1 and SW6.3 are set to the OFF position.

9. Connect a centre-positive +5V power supply to the connector marked PWR and apply the power.

3. Adding Sample Code into DS-5

An ARM developer account (see https://login.arm.com/register.php) is required to complete these steps.

DS-5 integrates various tools such as compiler, assembler, debugger and editor into a common

graphical user interface and requires a working internet connection for license activation. Start

DS-5 from the start menu:

Start > All Programs > ARM DS-5 -> Eclipse for DS-5

Note: Proxy settings in DS5 under ‘Window > Preferences > General > Network Connections’

may need to be configured when accessing the license server. Set the Active Provider to

‘Manual’ and configure the ‘Proxy entries’ and ‘Proxy bypass’ before clicking ‘OK’.

10. The first time DS-5 is started you will be asked to obtain a licence. Click ‘Ignore’. Go to

http://ds.arm.com/renesas/rza-starter-kit/ to get the activation code. Scroll down and copy

the activation code from the orange area. (xxxxxxxxxxxxxxxx represents a unique number).

11. From the DS-5 ‘Help’ menu, select ‘ARM License Manager’. In the ‘View and edit licenses’ dialog, click ‘Add

License’. In the "Obtain a new license" dialog, for the entry "Enter a serial number or activation code:" paste the

activation code. Click Next.

12. In the "Choose Host ID" dialog the data is automatically filled. Click Next.

13. In the "Developer Accounts Details" dialog enter the user name and password and click Next.

14. Click ‘Close’. In the ‘Confirm Restart Eclipse’ dialog click ‘Restart Eclipse’.

15. In the ‘Select a workspace’ folder that appears, browse a suitable location and folder name to save your new

workspace.

16. In the DS-5 welcome screen, click ‘Go to the workbench’, which is the last item under the 'DS-5 Resources'

heading.

17. Right-click in the Project Explorer window, and select ‘Import’.

18. Under ‘Import Source’ select General > Existing Projects into Workspace, and click ‘Next’.

19. Click the ‘Browse’ button, and locate the following root project directory:

‘C:\Renesas\Workspace\RSK\RSK+RZA1_V02’

20. Ensure the ‘Copy projects into workspace’ option is ticked and then click ‘Finish’.

4. Adding GNU Toolchain Support for DS-5

21. From the DS-5 ‘Help’ menu, select ‘Install New Software…’.

22. From the Install dialog, select ‘Add…’.

23. Click the ‘Archive…’ button and browse to C:\Renesas\Workspace\RSK\RSK+RZA1_V02\Renesas_ARM-

RZ_Update.zip. Click ‘OK’.

24. Back in the ‘Install’ dialog, ensure that the tick box ‘Renesas ARM-RZ Update’ is selected, then click ‘Next ’.

25. An 'Install Details' dialog appears. Review the licenses. Click 'Next'

26. The Install dialog will appear, select the option “I accept the terms of the license agreement”. Click ‘Finish’.

27. A security dialog will appear. Click ‘OK’. The toolchain will then be installed into DS-5

28. After installation has completed it will be necessary to restart DS-5. In the dialog click ‘Restart Now’.

29. Once DS-5 has restarted, go to the ‘Help’ menu and select ‘Integrate Toolchain’.

30. In the ‘Preferences’ dialog, under ‘C/C++ -> Renesas -> Renesas Toolchain Management’, ensure the tick-box is

checked, then click ‘OK’.

5. Programming and Debug

31. Left-click the Tutorial project to select it, then click the arrow next to the build button (hammer icon),

and select ‘Debug’ from the drop down menu.

32. DS-5 will now build the project. Once this is complete, debugging can be started by clicking the

arrow next to the debug button (bug icon), and selecting ‘Debug Configurations…’.

33. Select the ‘DS-5 Debugger’ icon in the left pane and click the ‘New launch configuration’

button.

34. The debug configurations control page will then be created. In the ‘Connection’ tab,

rename the configuration ‘Tutorial Debug’.

35. In the ‘Select Target’ tree control, ensure that ‘Renesas -> RZ/A1H R7S721001 -> Bare

Metal Debug -> Debug Cortex-A9 via DSTREAM/RVI’ is selected.

36. In ‘Connections’, click the ‘Browse…’ button.

37. A firewall warning may be displayed for ‘eclipse.exe'. Check the 'Private networks, such as my home or work

network' box and click 'Allow access'.

38. In the ‘Select Debug Hardware’ dialog, select ‘J-LinkUSB:xxxxxxxx’. Click OK.

39. In the ‘Connection’ tab click ‘Apply’, then review the settings listed in the screenshot below.

40. Append “:device R7S721001_DualSPI” to the connection serial number string as shown above.

41. Select the ‘Files’ tab. Under ‘Target Configuration -> Application on host to download’, click the ‘Workspace’ button.

Browse to ‘RZ_A1H_Tutorial_RSK -> Debug -> RZ_A1H_Tutorial_RSK.x' and click OK.

42. Click ‘Apply’ to save the changes, then select the ‘Debugger’ tab.

43. In the ‘Debugger’ tab, under ‘Run control’, ensure that ‘Debug from symbol main’ is selected.

44. Select the ‘Run target initialization debugger script (.ds/ py)’ tick box and click ‘Workspace’. In the ‘Open’ dialog,

browse to ‘RZ_A1H_Tutorial_RSK -> scripts -> init_RAM_RZ-A1H.ds' and click OK.

45. In the ‘Debugger’ tab, click ‘Apply’ to save the changes, then review the settings listed in the screenshot below

Note: Untick the ‘Run target…’ option when downloading the Release application file.

46. Click the ‘Debug’ button to download the code to the target, and begin debugging.

47. A user account control dialog may be displayed. Enter the administrator password and click <Yes>.

48. DS-5 will ask you to change to the ‘Debug Perspective’, click ‘Yes’.

49. There may be a 'J-Link v4.84b Firmware Update' dialog on first connection. Click OK to update the firmware.

50. Once the code has been downloaded, the debugger will stop at the first line of the main() function.

Click the ‘Continue’ button to run the target through the code.

51. Refer to the LCD display. Press SW1, SW2 or SW3. The text ‘STATIC’ will appear near the bottom

of the LCD panel, before being replaced with ‘TESTTEST’ one character at a time.

52. Rotate the Analog Adjust control (RV1). The rate of flashing of LED0 will vary.

53. Click the 'Interrupt' button. The program will stop and the source code will be opened at the current

program counter

6. Running the TFT Touchscreen Sample Program

54. Disconnect the debugger using the ‘Disconnect from Target’ button; remove the debugger from

CN14 and power down the RSK+.

55. The TFT Touchscreen sample is programmed into the RSK+ NOR FLASH. To run the program

from NOR FLASH, first ensure that all SW6 switches are set to the ON position.

56. Connect the RSK TFT App Board to the RSK on CN44.

57. Connect a USB cable between the USB Serial connector (CN18) and an available USB port on the host PC.

58. Open a serial terminal (e.g. HyperTerminal), select the appropriate COM port and set the baud-rate to 115200 bps.

59. Re-apply power to the RSK+.

60. The program responds to up to 5 simultaneous finger presses on the touchscreen, by colouring the screen in the

touch locations in various colours. The co-ordinates of all 5 concurrent touches are displayed in the serial terminal.

7. Next Step

After you have completed this quick start procedure, please review the tutorial code and sample code that came

with the kit. You can review the other samples using the sub-projects in the Project Explorer. The Tutorial Manual

will help you understand the device and the development process using ARM Development Tools.

The Hardware Manual supplied with this RSK is current at the time of publication. Please check for any updates and

additional content from the Renesas internet site at: http://www.renesas.com/rsk+rza1h

8. Compiler Support

The version of the compiler provided with this RSK is fully functional GNU compiler with a size-limited ARM licence,

but requires registration before it can be used.

9. User Manuals

User manuals can found in the Windows™7Start Menu. (Start Menu > All Programs > Renesas Electronics Tools

> RSK+RZA1 DS-5 > Manuals).

For Windows™8, click the down arrow in the Start page. The user manuals are available in Apps > Renesas

Electronics Tools.

10. Support

Online technical support and information is available at: http://www.renesas.com/rsk+rza1h

Technical Contact Details

America: [email protected]

Europe: http://www.renesas.eu/ibg-kitsupport

Japan: [email protected]

Support for the GNU RZ Compiler is available from http://www.kpitgnutools.com

Website: http://www.renesas.com D013084_11_S01

Andere Handbücher für Starter Kit+

Inhaltsverzeichnis

Andere Renesas Mikrocontroller Handbücher

Renesas

Renesas R5F56307CDFN Bedienungsanleitung

Renesas

Renesas R5F565NEHDFC Montage- und Bedienungsanleitung

Renesas

Renesas R5F51105ADFM Bedienungsanleitung

Renesas

Renesas H8S/2329 Bedienungsanleitung

Renesas

Renesas RL78/G15 Bedienungsanleitung

Renesas

Renesas RX62T Bedienungsanleitung

Renesas

Renesas QB-RL78D1A Bedienungsanleitung

Renesas

Renesas RZ/G1H Bedienungsanleitung

Renesas

Renesas R-IN32M3-EC Installations- und Betriebshandbuch

Renesas

Renesas RL78 Series Bedienungsanleitung

Renesas

Renesas V850ES/JE3-E Bedienungsanleitung

Renesas

Renesas RX72M Renesas Starter Kit Bedienungsanleitung

Renesas

Renesas RL78/G1H Bedienungsanleitung

Renesas

Renesas QB-78K0FX1 Bedienungsanleitung

Renesas

Renesas RL78/G23-128p Bedienungsanleitung

Renesas

Renesas RL78/G1P Gebrauchsanweisung

Renesas

Renesas RA2E2 Group Bedienungsanleitung

Renesas

Renesas RA4 Series Installations- und Betriebshandbuch

Renesas

Renesas 78K0/FF2 Bedienungsanleitung

Renesas

Renesas VENUS Bedienungsanleitung

Renesas

Renesas RX63N Bedienungsanleitung

Renesas

Renesas Synergy DK-S7G2 Bedienungsanleitung

Renesas

Renesas E100 Bedienungsanleitung

Renesas

Renesas RL78/G11 Bedienungsanleitung

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung