ReSound ONE RT61-DRWC Bedienungsanleitung

Quick guide

ReSound ONE

61 Rechargeable RIE

PROGRAM WHEN TO USE BEEPS

Programs:

(if set up by your hearing care professional)

Product: ReSound ONE

Model: RT61-DRWC

Serial number (R):

_______________________________

Serial number (L):

_______________________________

Battery size: Lithium-ion

My hearing aid information

E. LED light indicator

F. Microphones

G. Right/Left indicator

H. Serial number and model

A. Push button

B. Receiver

C. Open dome

D. Receiver wire

View ReSound’s hearing aid tutorial videos at youtube.com/resoundus.

Get to know your hearing aid

Your hearing aids are automatically

turned on when they are removed

from the hearing aid charger. They

can also be turned on and o manu-

ally by pressing the push button for 5

seconds.

What you need to know

Getting started: On/O function

SECONDS

Hearing aid charger

1. Hearing aid charging bay

2. Receiver bay

3. Left indicator (blue)

4. Right indicator (red)

5. Charging cable

6. Charging cable port

When charging

– blinking.

When fully charged

– on until removed.

Your hearing aids are fully charged

within 3 hours.

• While your hearing aids are

charging,the on/o light on your

hearing aid will blink slowly.

When fully charged, the light

remains on (not blinking)

until your hearing aid is removed

from the charger.

When charging

– blinking.

When fully charged

– on until removed.

Your hearing aids are fully charged

within 3 hours.

When charging – blinking

When fully charged –

on until removed

How to charge your hearing aids

Fully charge your hearing aids before

using them the ﬁrst time

• Plug the power

adaptor into

a power

outlet and

connect the charging cable to

the hearing aid charger.

• Place both

hearing aids in

the charging

bays. The right

side is marke with a red dot and

the left side is marked by a blue dot.

• Place hearing aids so the receivers

go into the receiver bay.

Flight mode:

Some airlines prohibit the use

of wireless hearing aids (RF

transmitters) onboard.

To use Flight mode, make sure this is

activated by your hearing care profes-

sional.

Follow these steps to turn on Flight

mode:

1. Turn the hearing aid o.

2. Press the push button for 9

seconds.

3. The hearing aid responds with

four times double ﬂashes and

double-dings for ten seconds.

To deactivate Flight mode:

1. Turn the hearing aids o and then

on.

2. Check that the dome is securely

mounted by carefully lifting the

lower part of the dome and ver-

ifying that the collar completely

covers the ribbed end of the wire.

When placed correctly, the dome

will appear slightly angled.

ReSound tulip domes

Tulip domes consist of two “petals”. It

is important that the largest petal is

the outermost petal. To ensure this:

1. Push the largest petal back, then

press the tulip dome over the

ribbed end of the receiver wire.

2. Then push the largest “petal”

back, and it will be

placed on top of

the smaller petal.

Daily: Clean your hearing aid.

Keep your hearing aids dry. Clean

the hearing

aids using a

soft cloth

or tissue.

Weekly: Clean the receiver tubes

and domes (B & C).

Use a soft cloth to clean the

receiver tube and dome on the

outside. Do not use water when

you are cleaning the receiver tubes.

As needed: Change domes (C)

ReSound standard domes

1. Push the new dome over the ribbed

end of the receiver wire.

Regular care & maintenance

2. Insertion: Insert the other end of

the tool into the sound outlet (the end

with the replacement ﬁlter). Gently

press the replacement straight into

the sound outlet until the outer ring is

touching the sound outlet. Pull the

tool straight out – your new wax ﬁlter

will remain in place. Re-attach your

dome or a

replacement

dome.

Monthly: Change the wax guard or

see your hearing care professional.

For changing white wax guards,

complete the following steps:

1. Removal: Remove the dome from

the receiver wire. Open the wax ﬁlter

case and take one of the tools out.

Each tool has a small hook in one end

and a new wax ﬁlter in the other. Insert

the removal tip into the used wax ﬁlter

and then pull the tool straight out. It is

important to pull it straight and not on

an angle.

View ReSound hearing aid tutorial videos at youtube.com/resoundus.

BEEP/TONE INDICATION ACTION REQUIRED

Ding, ding, ding, dong Low battery Charge battery

Ding (5 or 10) Hearing aid is starting up After dings cease, hearing aid

is turned on

Ding-ding,

ding-ding, etc.

Hearing aid is in ﬂight mode Use in ﬂight mode if desired,

or turn the hearing aids o

and then on

Ripple tone Hearing aid is in streaming

mode

Use with wireless

accessory or press the push

button to exit streaming

mode

If there are any other problems not mentioned in this guide, please contact ReSound

or your hearing care professional.

Beep/tone indicators

SYMPTOM CAUSE POSSIBLE REMEDY

No sound Blocked earmold or tube

Blocked wax guard

Clean earmold or tube

Replace wax guard or consult your hearing care professional

Not loud enough Blocked earmold or dome (C)

Change in hearing, volume too low

Excessive ear wax

Clean earmold, replace dome (C), replace guard

Consult your hearing care professional

Excessive

whistling/feedback

Incorrect earmold placement

Incorrect dome (C) placement

Excessive ear wax

If none of the above

Re-insert earmold carefully

Re-insert dome (C)

Clean guard/consult your hearing care professional

Consult your hearing care professional

Wireless does not work Device may be in ﬂight mode Turn the hearing aid o and then back on

Hearing aid is not

charging

Does the hearing aid sit correctly in the

charger?

Is the hearing aid charger charged?

Reinsert the hearing aid in the charger.

Plug the charger into a power outlet and connect the

charger cable to the hearing aid charger.

Troubleshooting

Inhaltsverzeichnis

Andere ReSound Hörgerät Handbücher

ReSound

ReSound ONE 62 Bedienungsanleitung

ReSound

ReSound LiNX Quattro 88 Bedienungsanleitung

ReSound

ReSound 60 series Bedienungsanleitung

ReSound

ReSound Azure Silhouette BTE AZ71-DVI Bedienungsanleitung

ReSound

ReSound AZ30 Bedienungsanleitung

ReSound

ReSound LiNX 3D MIH Bedienungsanleitung

ReSound

ReSound LiNX 3D 88 Bedienungsanleitung

ReSound

ReSound ES70-VI Bedienungsanleitung

ReSound

ReSound M60 Bedienungsanleitung

ReSound

ReSound LINX 3D Bedienungsanleitung

ReSound

ReSound ENZO 2 Montageanleitung

ReSound

ReSound X-plore BTE XE61-DI Bedienungsanleitung

ReSound

ReSound VE10 Bedienungsanleitung

ReSound

ReSound Magna Bedienungsanleitung

ReSound

ReSound Linx Quattro Bedienungsanleitung

ReSound

ReSound Match MA2T70-V Bedienungsanleitung

ReSound

ReSound KE461-DRWC Bedienungsanleitung

ReSound

ReSound MINI BTE 61 Bedienungsanleitung

ReSound

ReSound Danalogic 6 6090 SP Bedienungsanleitung

ReSound

ReSound AVENTA 3.9 Montageanleitung

ReSound

ReSound 10 CIC Bedienungsanleitung

ReSound

ReSound IIC Bedienungsanleitung

ReSound

ReSound Ziga BTE ZG80-VI Bedienungsanleitung

ReSound

ReSound ENYA Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Widex

Widex SUPER 220 S2-VSD Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Siemens

Siemens Life micon Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung