Retevis RT-35 Bedienungsanleitung

User manual

RT-35

Handheld walkie-talkie

PRECAUTION

This unit conforms to telecommunications management

standards, please observe the following rules when using:

1,When Using this machine, you should not cause harmful

interference and must accept any received signal.

2, Any operation without permission is illegal, and maybe

violet the telecommunications management standards. Such

as: change the frequency, change the transmit power, extend

the antenna, and so on

3.This machine cannot be used in a hazardous environment,

because it may cause an explosion or fire. The hazardous

environment include: gas stations, hospitals, airports, the

place without electrical shielding and so on.

4. Do not use soft cloth with detergent or solvent to wipe or

clean the machine, use the dry, acid-free soft cloth only.

5. In order to ensure the best voice quality, please keep 5cm

distance between your mouth and the machine and use your

normal voice intensity. To get a better voice quality, please

turn the antenna upward.

6. The battery of this machine has an internal protect

function.

BATTERY USAGE

The mini walkie-talkie built-in lithium ion battery. The fittings

include USB charger that can charge the lithium battery, the

charging method is as follows:

1. The charging jack is at the right side of the machine

2.Connect the USB charger to a standard power socket.

3. Then connect the USB charger to the charging jack or

headphone jack. During charging, the battery indicator Fig

will be cycle moving. And when charging complete, the cycle

moving will be stopped

PREFACE

Welcome to use this mini walkie-talkie, please read this user

manual carefully in order to understand all the operating

function.

Men u mod e LCD inst ruct ions

indic

ator

name

content

218

Channel

programming

c l o c k /

volume

level

Channel programming / clock /

volume level. When the volume

level is displayed in the number

of standby Press up or down key

188

CTCSS / DCS

pro g ram m ing

/ M i n u t e / v o l u

m e U O

instructions

When the minutes standby, press

PPT key to display after the

current CTCSS / DCS

programming number.

Sta n dby displ a y t he volume

indication“ ” press up

key or down key.

Battery power

display

Show the number of cells, the

more power the more foot: High

power,

“ " low battery“ ”

Hand-free

instructions

Display when the unit is in the

alarm mode of operation.

A l a r m

indication

Display when the unit is in the

alarm mode of operation.

O p e n t h e

i n t e r c o m

f u n c t i o n

indication

Display when the unit is in the

open mode. When close will

not show this icon.

S c a n n i n g

instructions

Di s pl ay w he n th e w al kie -

talkie under scan function…

Radio Unit Two

Headset Two

Switching power supply double One

Strap Two

User's Manual : One

Number

Name

Description

Power/Me

nu Button

Long press this button can open / close radio; short press to

enter the radio function setting.

Talk/Call

key

Press and hold this button to transmit information ,quickly

press twice to send calling sound.

Up key

Use this button to adjust volume or function setting

choosing.

Down key

Use this button to adjust volume or function setting

choosing.

Scan/ L E D

ke y

illum i natio

Long press to enter the scanning channel, short press to

enter the illumination.

Lock/Monit

or button

Long press to enter the inter-lock, press enter monitor

function.

MIC

Built-in microphone.

Speaker

Built-in speaker

Antenna

Enhanced signal reception and emission

USB

Interface

It is a walkie-talkie charging interface

Earpiece

Jack

It is a walkie-talkie headset jack

Flashlight

It is a walkie-talkie lights

LED

It is a walkie-talkie LED

ITEM DESCRIPTION

THE MAIN FEATURES OF WALKIE-TALKIE

A plurality of selectable channels.

Effective intercom distance of 3 kilometers.

Automatic squelch.

Auto save power.

It has an internal voice intercom (speaker

phone) function.

Channel scan and monitor.

24-hour time display.

Alarm reminders appear.

Flashlight and backlight.

Notice:

This radio come with a dedicated charger, To avoid damage

your radio and lithium ion batteries, please do not use other

chargers. Please do not transmit when charging.

The new battery should be charger around 12hours when

use it first time.

BATTERY LOW POWER TIPS

When the unit detects a low battery in the talk mode and

standby mode, Power indication“ ” start Flashes.

Remind you to recharge.

USING THE WALKIE-TALKIE

This unit can set the functions in the intercom mode.

1、Press and hold the power / menu button about 3 seconds,

the unit will automatically power on to speak mode, The

display shows the icon," " under intercom mode.

Exit intercom mode, press and hold the power / menu

button about three seconds, then the unit emits a long

"beepa" sound (In a short "beep" sound after). The clock will

be display only in standby mode.

Repeat above steps from standby mode to enter intercom

mode.

2、Press the power / menu button to access the function

settings.

Activated icon will begin blinking.

Press repeatedly this button, explore other menu

functions until back to the intercom mode. it will issue a

"beep" sound when you press the button every time.

3、After activate a function icon, press the up or down key to

select menu options.

4、Press PTT-button to save and back to standby.

After the func t ion icon flashes stopped, the unit

automatically save the settings and return to standby.

SELECT CHANNEL

This radio have multiple channels, channel selection

method is as follows:

1、When standby, press the power / menu button again until

the current channel starts flashing on the LCD screen, enter

the channel setting status

2、Press the up or down key to select the channel number

3、Press the Power / Menu button to save the settings and

return to the receiving status

4、Press the PTT-button to save and return to the receiving

status.

Function Description

Select CTCSS/DCS which allows you to receive calls from

members of the same group (same mute code) issued,

avoiding the same frequency interference from other users.

Note: CTCSS / DCS cannot make your talking content keep

secret, it can only make you unable to receive calls from

other CTCSS / DCS users.

1、 when standby, press the power / menu button twice, until

the mute code of current channel starts flashing, thus enter

the reset status of CTCSS / DCS.

Press the up arrow key or down arrow key to select the

mute code.

Long press the up key or down arrow key to select the

mute code quickly.

2、 Press the PTT / CALL to save the settings. Or press the

power / menu button to enter next function option.

Channel scan

Scan function lets you scan all channels occupancy.

1、when standby, press the Scan button to activate scan

function, the machine starts to scan all channel activities),

when there are voices in scanned channel, it will stay 4~5s in

this channel, then continue to scan next channel.)

2、press the Scan key to exit the channel scan.

Transmission and reception

1、On receiving status once power on.

2、Press and hold the PTT / CALL to sends voice. Use the

normal voice to transmit, there should be 5 cm between

mouth and microphone.

3、After Speaking, release the speaking key/call key, the

machine is in the receiving status.

Adjust the volume

status.

After the channel number icon stop flashing, the unit

automatically save your settings and return to the receiving

status.

Call Tone Setting

1、When Standby, repeatedly press the Power / Menu key to

call setting“ ” on the LCD screen.

2、Press the up or down key to select a call tone.

3、Press the Power / Menu button to save the settings and

then enter other function settings

4、Press the call / call button to save and return to standby.

After Call Settings icon stop flash, the unit will be save the

settings and back to standby.

Send call alerts sound

1、When need to send call alerts sound, press the Talk / Call

key twice quickly, Call alarm sound will be send automatic.

2、When call alerts sound transmit complete, you can hear a

short confirmation sound, the unit will be back to radio

standby status.

Hands-free function

The machine is equipped with hands-free devices, it can

automatically send voice. Under this function, you can

activate the radio to send information.

Hands-free function settings

1、When Standby, repeatedly press the Power / Menu button

until the LCD hands-free function label “ ”appears.

2、Press the up or down key to switch hands-free on / off

function, alternately shows "0,1,2,3"，Appears on the

display Hands-free indicator“ ”

(0: close hands-free function; 1: noisy environments;

When Standby, press the up key or down key to adjust the

volume to an appropriate level. This Machine has eight

adjustable volume.

Call alerts

This machine has 10 call alerts sound available.

Use earplugs (optional)

The walkie-talkie is set to non-hands-free mode.

Open the headset/charger jack on the side of the machine.

Insert the headset. adjust the microphone position.

Automatic noise suppression

The machine with automatic noise suppression function can

reduce noise, provide high-quality voice effects, Let's hear

more clearly

Automatic power saving feature

The machine is equipped with a unique circuit that can

extend battery life, If you do not receive any signal

transmission within 5 seconds, it will automatically switch to

energy-saving mode, in this mode, you can still receive the

signal)

Backlit display

Press any key, the LCD back light is automatically displayed

for five seconds.

Set the time

The unit has a 24-hour clock function set as follows:

1、Standby, press the Power / Menu button five times until

the hour digits displayed.

2: Under normal circumstances use: 3: quiet environments)

3、Press the Power / Menu button to save the settings and

enter other feature settings.

Hands-free indicator flash stopped, the unit will be back to

radio standby status.

High/Low Power Selection

Standby, repeatedly press the Power / Menu button. Press

MENU button to display the flashing LO or HI (LO for small

power 0.5W; HI for high-power 1W) .Then, Click ok and exit

the menu. LCD will show LO or HI.

digits, time can be set from 0 to 24 hours.

3、Press the power / menu button until the minute digits

displayed.

4、Press the up or down key to increase or decrease the

minute digits

5、press the power / menu button to save the settings and

enter other feature settings.

6、press the call / call button to save and return to standby.

Set the alarm

1、Standby, repeatedly press the Power / Menu button until

the alarm symbol “ ”appears on the LCD screen. Press

the up or down key to select turn off or turn the alarm function

2、Select the alarm function, press the Power / Menu button

to enter the set alarm hour time setting, Hours start flashing ,

Press the up arrow key or down arrow key to alarm hours.

Press the power / menu button starts blinking minutes, Press

up arrow key or down arrow key to set alarm minutes. After

the digital clock icon flashes stopped, the unit automatically

save the settings and return to standby.

Key-Tone On/Off

When a button is pressed, the unit will deep briefly to set the

key-tone.

press the menu-button seven times. Press up key to

enable (ON) or down key disable the Key Tone (OF).

press the PTT-button to confirm your selection and return

Andere Handbücher für RT-35

Inhaltsverzeichnis

Andere Retevis Zwei-Wege-Funkgerät Handbücher

Retevis

Retevis RT21 Bedienungsanleitung

Retevis

Retevis RB87 Bedienungsanleitung

Retevis

Retevis RT22 Bedienungsanleitung

Retevis

Retevis A9136A Bedienungsanleitung

Retevis

Retevis RT10 Bedienungsanleitung

Retevis

Retevis RB20 Bedienungsanleitung

Retevis

Retevis RA15 Bedienungsanleitung

Retevis

Retevis RT-35 Bedienungsanleitung

Retevis

Retevis RB637 Bedienungsanleitung

Retevis

Retevis RB19P Bedienungsanleitung

Retevis

Retevis RT-628 Bedienungsanleitung

Retevis

Retevis A518 Bedienungsanleitung

Retevis

Retevis RT28 Bedienungsanleitung

Retevis

Retevis RT30M Bedienungsanleitung

Retevis

Retevis RB19 Bedienungsanleitung

Retevis

Retevis RB25 Bedienungsanleitung

Retevis

Retevis RB28 Bedienungsanleitung

Retevis

Retevis RT642 Bedienungsanleitung

Retevis

Retevis A7105A Bedienungsanleitung

Retevis

Retevis RT47 Bedienungsanleitung

Retevis

Retevis RT30M Bedienungsanleitung

Retevis

Retevis RT18 Bedienungsanleitung

Retevis

Retevis RB17P Bedienungsanleitung

Retevis

Retevis RT45 Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Motorola

Motorola XT665d Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Motorola

Motorola TLK 150 Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

RELM

RELM RP3000 Bedienungsanleitung

Motorola

Motorola ASTRO SRX 2200 Series Bedienungsanleitung