Rexing M2 Max Bedienungsanleitung

M2 Max

User Manual

The information in this manual is subject to change without notice.

www.rexingusa.com

Notice

The user menu is to be set up in non-video mode. If the device is in video mode,

please proceed only after stopping the video recording.

Memory Card: Using a new MicroSD card always requires formatting it to your

device. Regularly clear the memory card, as continuous video recording for an

extended period of time may produce some protected files that are not subject to

long-term protection (these files may not be overwritten during loop recording)

and some storage fragments, which must be cleared regularly in order to save

usable storage space.

Time-lapse photography should not be enabled while driving. This function

captures images more slowly than normal but plays in speed-up mode, which

may affect the integrity and continuity of your video.

On-board Charger: The standard input voltage is configured to 12V. If a voltage

greater than 12V, contact store of purchase or our customer care via

[email protected] to replace it with a replacement charger.

The features described in this operation manual are available for all products of

the same type. The device you buy may be a model with optional or additional

functions. Menu operations may vary. Please refer to your actual product.

Pay attention to the mounting position, which must not interfere with driving or

lead to unsafe driving operation. Make sure it is safely secured.

A standard 6-meter cable is provided for the rearview camera. It is not

recommended to install this type of dash cam if your car is larger than the

connection cable range.

The battery (module or pack) must not be exposed to overheat

environments such as direct sunlight or flame.

Never remove, strike, or squeeze the battery or put it in fire. Stop

using the battery if it is ballooned, warped, leaking, or shows any

other visible signs of damage.

Warning

We hope you love your new products as much as we do. If you need assistance, or

have any suggestions to improve it, please contact us.

Our support team will respond to you as soon as possible.

Always a surprise with Rexing

•https://www.facebook.com/rexingusa/

•https://www.instagram.com/rexingdashcam/

•https://www.rexingusa.com/support/registration/

Overview

Thank you for choosing REXING!

Check us out here.

Facebook Instagram Site Product Support

[email protected]

(877) 740-8004

What’s in the box?

1 2 3

4 5 6

1. Rexing M2 Max Smart

Mirror Dash camera

2. Rexing rear camera

3. GPS Logger

4. In-car power cable (12ft)

5. Cable Management Tool

6. User Manual

M2 Max

User Manual

Theinformation in this manual is subject to change without notice.

www.rexingusa.com

Table of Contents

Camera Overview

Installation

Basic Operations

Product Specifications

General Troubleshooting

Warranty & Support

Type-C Port

Rearview Camera Port

MicroSD Card Slot

GPS Port

Display/Touch Screen

Front Camera

Reset Key Pinhole

Speaker

MIC Pinhole

Camera Overview

Power Key

In connection with an external power source, in the power-off

state, press and hold the power button on the bottom for three

seconds to start the device. In a power-on state, press and hold

the power button for three seconds to switch off the device.

In a power-on state, press this button quickly to turn the

screen backlight off. Press it again to turn the backlight on.

Designation

Power Button

Except for power - on/off operation, all other primary

functions can be accessed on the LCD touch screen.

Display /

Touch Screen

If the device crashes, unplug the power source, OR stick a pin

into the reset slot labled R on the back of the device to resume

normal operation.

Reset Key

Front camera faces the same direction as the front of the

vehicle and captures videos/images in front of the car.

Front Camera

Rear camera plug-in port labled AV port on the top of the device.Rear Camera

Port

Power PortType-C

Plug the included GPS Logger into the GPS port to utilize the

location tracking function.

GPS Port

A slot for inserting a MicroSD cardMicro SD

Card Slot

Description of Functions

Due to excessive mishandling, this device could be damaged during

transportation. To avoid the high cost of troubleshooting and repairs due to

repeated mounting and removal, we recommend that you assemble all

components first after delivery and test the device with the on-board charger

power supply. Make sure that the device is visibly undamaged prior to installation.

Contact our Customer Care with any questions or concerns.

I. Install the Device

Turn off the engine of the car.

Place the MicroSD card into the slot.

Secure the dashcam to the rearview mirror of the car.

Plug the GPS module into the GPS port and secure the module to a pillar on the

inside of your vehicle that is near the reveiw mirror. The antenna receiver side (the

side without 3M adhesive) faces the outside and the side with 3M adhesive faces

down. It should be properly secured.

Plug the charger into the car’s cigarette lighter and connect it to the dash cam’s

Type-C Port.

Installation

The optional rearview camera is mounted on the rear of the car. Pay attention to its

orientation during installation. Plug the rearview camera connector into the

corresponding port of the dashcam once the installation is completed. Adjust the

position of the lens to ensure that it aligns horizontal with the ground. Start the

engine to check the video functionality of the device.

Note:

Some rearview cameras are connected through removable coupling connectors.

If you receive a product with a separated plug and socketed cable, then connect

the plug-in components properly according to the illustrations below. To avoid

damage to the pins and connector holes, never use extra force while making

connections. The rearview camera cable must be plugged into the Rear Camera

port on the device.

II. Install the Rearview Camera

Location of GPS Module

Power Supply Wiring Location

Optimum Instalation Location

Inhaltsverzeichnis

Andere Rexing Dashcam Handbücher

Rexing

Rexing M1 Pro Bedienungsanleitung

Rexing

Rexing M1 Bedienungsanleitung

Rexing

Rexing V1 Bedienungsanleitung

Rexing

Rexing V1P SE Bedienungsanleitung

Rexing

Rexing W303 Bedienungsanleitung

Rexing

Rexing V1 Bedienungsanleitung

Rexing

Rexing V1PGW-4K Bedienungsanleitung

Rexing

Rexing V33 Plus Bedienungsanleitung

Rexing

Rexing V1P Max Bedienungsanleitung

Rexing

Rexing S300 Bedienungsanleitung

Rexing

Rexing V1 Bedienungsanleitung

Rexing

Rexing M3 Bedienungsanleitung

Rexing

Rexing V1P Pro Bedienungsanleitung

Rexing

Rexing MTC1 Bedienungsanleitung

Rexing

Rexing V1 Max Bedienungsanleitung

Rexing

Rexing V1P Pro Bedienungsanleitung

Rexing

Rexing S3 Bedienungsanleitung

Rexing

Rexing P1 Bedienungsanleitung

Rexing

Rexing V1LG Bedienungsanleitung

Rexing

Rexing S1 Bedienungsanleitung

Rexing

Rexing DT2 Bedienungsanleitung

Rexing

Rexing W202 Mini Bedienungsanleitung

Rexing

Rexing S1 Pro Bedienungsanleitung

Rexing

Rexing V5 Bedienungsanleitung

Beliebte Dashcam Handbücher anderer Marken

Cansonic

Cansonic UltraDuo Z2 Bedienungsanleitung

Gazer

Gazer F720 Bedienungsanleitung

HP f500g Bedienungsanleitung

Xblitz

Xblitz TANGO 4K Bedienungsanleitung

Maka Technologies

Maka Technologies Marbella MXPro Bedienungsanleitung

NESA

NESA NRC-80DLM Montage- und Bedienungsanleitung

Kaiser Baas

Kaiser Baas R20 Bedienungsanleitung

Boyo

Boyo VTM43TC Bedienungsanleitung

Minolta

Minolta MNCD37 Bedienungsanleitung

Thinkware

Thinkware FA10 Bedienungsanleitung

Momento

Momento MD-5200 Bedienungsanleitung

BlackVue

BlackVue DR590X-1CH Bedienungsanleitung

HP F300 Bedienungsanleitung

CammSys

CammSys BlackSys BH-300 Bedienungsanleitung

Snooper

Snooper DVR-2HD Bedienungsanleitung

Lukas

Lukas Q900 Bedienungsanleitung

RVS

RVS 450C Bedienungsanleitung

BlackVue

BlackVue 750G PRO Referenzhandbuch