6
holds the power transformer and weighs 43 lb (20 kg) and the second carton contains the
amplifier and weighs 50 lb.(17 kg).
Alpha recommends that you retain the cartons after installation in the unlikely situation
that you need to ship the unit later. Contact RF Concepts at 303-473-9232 for shipping
advice and assistance.
1.4 Safety Information –Installation and Operation
Make sure the Alpha 8406 is located where there is good air circulation all around
and on top of the cabinet. The unit may become hot during operation.
The Alpha 8406 weighs approximately 70 pounds when the transformer is
installed. Use proper lifting techniques and two people when moving the
amplifier. Note that amplifier should NEVER be transported with the transformer
in place.
The Alpha 8406 is designed to meet international safety standards and FCC
regulations. However, one should always remember that the equipment works
with high voltages that can be LETHAL!
This operating manual holds information, cautions and warnings that must be
followed to ensure safe installation and operation. Read Chapter 1 before
attempting to unpack or operate the Alpha 8406 amplifier.
Warnings: What Not to Do
Never open the amplifier case without unplugging the unit from
the wall outlet.
Always resist the temptation to immediately hit the ON button after
the amplifier faults to power off.
Never touch an antenna during transmission.
Never attempt to turn on the amplifier without the cover
securely in place (all attachment screws reinserted).
Never turn the amplifier back on after a hard fault without
waiting at least 20 seconds.
Never allow liquids to enter the amplifier through the cover holes.
Never stick objects into holes in the case.
Warnings posted in this manual should be read and thoroughly
understood by users. Failure to perform procedures properly
may result in amplifier damage, fire hazard, or electric shock.
1.5 Owner Assistance
Technical Assistance from RF Concepts is available from several sources.
