RFE DS Series Bedienungsanleitung
1
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
USER MANUAL
TRANSMITTERS DS SERIES
30|50|100|300|500|1000W
Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
2
Index
Indice ................................................................................................... 2
Introduction & general information structure ...................................................... 4
Hazardous Voltage Warning ............................................................................. 4
General Safety Recommendations .................................................................... 5
Document structure ........................................................................................ 6
Scope of the document ................................................................................... 6
Introduction ................................................................................................... 7
Features ........................................................................................................ 10
Diagram block ................................................................................................ 11
Technical Specifications .................................................................................. 12
Installation and Use ........................................................................................ 13
Front panel .................................................................................................... 13
Rear panel ..................................................................................................... 14
Operating instructions ..................................................................................... 15
RF On/Off Switching .................................................................................... 16
Fault/Reset Key ........................................................................................... 17
Installation .................................................................................................... 18
Unpacking .................................................................................................. 18
First power-on and setup .............................................................................. 18
Quick start .................................................................................................... 19
Menu .............................................................................................................. 20
Menu - Frequency ........................................................................................ 21
Menu - Power .............................................................................................. 22
Menu - Audio Settings .................................................................................. 22
Menu - Settings ........................................................................................... 25
Lan configuration ...................................................................................... 26
Date/Time Settings .................................................................................... 28
DB25 Settings .......................................................................................... 29
Address port RS485 .................................................................................. 30
19kHz Output Amplitude/Dev Amplitude/Dev Ph ........................................... 30
Power Reduction Settings ............................................................................. 31
Set FSK/ID-Code Settings .............................................................................. 32
AES/EBU Settings ........................................................................................ 32
Audio C.O./Reserve audio source ................................................................... 33
Options Status ............................................................................................. 33
Preset - Settings ............................................................................................ 34
Alarms/Log Event ........................................................................................... 36
3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
DB25 and DB9 pinout ..................................................................................... Appendix A
Touch screen calibration ................................................................................. Appendix B
Upgrade Firmware .......................................................................................... Appendix C
Log-event and Alarms list ................................................................................ Appendix D
Web Page Control-SNMP ................................................................................. Appendix E
Support system .............................................................................................. Appendix F
Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
4
Introduction & general information structure
This manual contains all informa on for installa on and maintenance of DS
transmi ers and is divided into two parts: the fi rst concerning operator that has to
use equipment, the other concerning maintenance technicians. The two sec ons are
separated by one blue page to quickly iden fy them.
The operator who normally has experience in using the equipment should not try
to perform any ac on which has been classifi ed as belonging to the maintenance
technician. Any incorrect opera on may cause damage to equipment electronics
and can be also poten ally dangerous for operator’s safety.
The RF power amplifi er has been designed for con nuous wave (CW) modes.
Technological cu ng-edge solu ons and latest genera on materials (such as sixth
genera on LDMOS) ensure a high standard of quality and robustness.
Hazardous Voltage Warning
WARNING:
Voltage within equipment is high enough to endanger life!
Do not remove external and internal covers!
this opera on is to be done by qualifi ed and authorized
personnel only!
HAZARDOUS
VOLTAGE
5
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
General Safety Recommendations
All work on transmi er system as well as installed units, e-g- the VHF/FM transmi er,
may only be carried out by trained personnel capable of iden fying dangerous
situa ons or condi ons. Take note of the following:
• Before working on a transmi er system, that is even before removing the VHF/
FM transmi er ensure that the correponding system documenta on is consulted.
• Before workign on an open unit ensure that the fuse ahead of the unit is
disengaged or the power cable to the unit is disconnected.
• Note that when service work is carried out, e.g. measurements or se ngs are
made during transmi er opera on, voltage carrying parts are not always secured
against touching.
• All work is to be carried out with great cau on.
CAUTION!
The VHF/FM transmi er does not possed a mains switch. Even when the transmi er
system is in the “OFF” state, voltages are s ll present at the assemblies of the VHF/FM
transmi er, e.g. mains power at the input of the power supply module is live and the
fan is in opera on.
Assemblies with components incorpora ng toxic substances are labelled as follows:
A warning sign as shown in the adjacent fi gure is glued to a component incorpora ng
a Toxic substance of glued in the vicinity of the component.
Warnung
Dieses Bauelement enthält Beryllium-Oxid, das in fein verteilter
Form giftig ist. Bei bestimmungsgerechter Verwendung des
Bauelementes entstehen keine Gefahren.
Gegebenenfalls sind entsprechende Sicherheits- und Umwelt-
vorschriften zu beachten.
Identifi cation of Toxic Substances
B e r y l l i u m o x i d
Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
6
Warning notices in this Manual
This label is used in the manual to indicated where incorrect
or non-compliance with direc ons or with procedures
relevant to electrical safety could easily lead to injury or fatal
Transmi er systems and equipment of RFE Broadcast S.r.l. are built exclusively
for use as in the terms of contract. Any other use is not in accordance with the
manufacturers s pultaions. The manufacturer is not liable for damage resul ng from
such use; the risk is carried alone by the customer.
Use according to s pula on includes opera ng, maintenance and servicing
procedures as directed by manufacturer. The transmi er system of RFE Broadcast
S.r.l. may only be operated, maintened and serviced by qualifi ed technical personnel
familiar with the relevant safety precau ons.
RFE Broadcast S.r.l. shall not be liable for any damages caused by unauthorised
modifi ca ons carried out by the customer on the transmi er systems or equipment
of RFE Broadcast S.r.l. or unauthorised modifi ca ons at interfaces to the equipment
of RFE Broadcast S.r.l.
Original parts and accessories are specially design for our products. Parts and
accessories not delivered by us have not been tested nor approved for use in our
equipment. Fi ng and/or use of suck items may alter the given characteris cs of
out products in an adverse manner such that ac ve and/or passive safety may be
impaired. We assume no obliga on or liability for damages cause by parts and
accessories not delivered by us.
A en on must be paid to important no ces contained in this manual. They are
labelled as follows:
W
A
R
N
I
N
G
!
This label is used in the manual to indicated where incorrect
or non-compliance with direc ons or with procedures
relevant to electrical safety could easily lead to damage to
C
A
U
T
I
O
N
!
Use according to stipulation
7
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
First aid
Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
8
Document structure
This document contains all the technical informa on rela ng to the transmi ers of
Series DS.
In the fi rst part we have all the technical specifi ca ons, followed by direc ons for
the fi rst installa on of the transmi er.
In the middle there is the explana on of the menu and func ons of the transmi er,
such as color display touch screen.
There are explanatory photos of the various components of the transmi er.
Finally, follow the wiring diagrams and layouts.
Scope of the document
Purpose of this document is to provide a comprehensive descrip on of the
func onali es of the DS TRANSMITTER and to provide opera ng informa on on the
so ware elements of the system.
DS TRANSMITTER User Manual provides so ware setup informa on.
9
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 500 - 1000W
Rev 1.3
Introduction
The transmi er DS is designed with all the latest technologies, such as high effi ciency
using the latest genera on LDMOS transistor and high effi ciency power supplies. We
used a modern interface and performance using a color display with touch screen,
with easy management so ware and easy to use. Each transmi er DS is equipped
with a LAN interface with the possibility of remote control completely the transmi er
opera on.
The transmi er DS is equipped with all audio inputs including Audio IP (as op on),
Fig. 1: Front View of the VHF/FM Transmi er DS30-50-100-300-500-1000
The VHF/FM transmi er DS30-50-100-300-500-1000 is intended for the transmission
of frequency modulated broadcasts in mono or stereo. It works with broadband
characteris cs in the VHF frequency range from 87.5~108 MHz and can be operated
with any frequency in this range without alignment.
The transmi er output power is variable between 10 W and 30 W. The transmi er is
available with diff erent remote control ports. It can store up to six broadcast programs
including program specifi c parameters such as frequency, RF output power, modula on
type, RDS, AF level and devia on limi ng. DS30 transmi er is equipped with a LAN
interface that permits the complete remote control of the transmi er opera on via
SNMP or Web Server.
Rev 1.3
USER MANUAL - TRANSMITTER DS SERIES - 30 - 50 - 100 - 300 - 500 - 1000W
10
Features
• State of the art performance
• LCD color display with touch screen for easy se ng and reading parameters
• Extremely low distor on: THD, IMD & TIM (Transient Intermodula on Distor on)
specifi ed
• Highest stereo performance: typ. 60 dB
• L,/R, RDS / SCA, AUX, MPX, AES-EBU XLR & Op cal, Audio IP
• Audio change over built-in
• Six Memory (frequency, sensi vity, power, etc. ) which can be stored diff erent
se ng. Ready for N+1 system
• Completely broadband
• Remote control for telemetry LAN, RS485
• RF amplifi ers using the latest genera on of semiconductors RF Power LDMOS
• Automa c Power Control (APC) maintaining stable pre-set RF power 1.5:1 VSWR.
Higher VSWR value causes power reduc on
• Nominal RF output level 30/50/100/300/500/1000W. Con nuously adjustable
power output
• Built-in RF harmonics fi lter and true wa meter
• High spectral purity
• CCIR & FCC compilant
The transmi er is accommodated in a 19“ chassis, 2-HU height. All opera on and
display elements are arranged on the front panel. The opera ng values are read from
the LCD colour display with touch screen. All connec ons to the components of a
transmi er system are arranged at the back of the unit.
VHF/FM Transmi er
Type Iden fi ca on: DS30
Reference Number: ATF00130-R
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere RFE Sender Handbücher
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
