RGBlink VSP 168HD Bedienungsanleitung
VSP 168HD Quick Start
VIEWSIZE THE WORLD
Support 10Gbps of transmission rate
Support HDBaseT protocols and standards
Support USB upgrade
Support custom output resolution
Max 2048×1152@60Hz/2560×816×60Hz
input/output resolution
Seamless switching between inputs
Multiple cascade for sync mapping
Support pixel to pixel synchronous mapping
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
1
CONTENT
Product Introduction...............................................................................................................................2
Packing Configuration............................................................................................................................3
Hardware Orientation..............................................................................................................................4
Front Panel.........................................................................................................................................4
Back Panel .........................................................................................................................................5
Operating Instruction..............................................................................................................................6
Content...............................................................................................................................................6
How to Do Customized Output Resolution.................................................................................7
How to Realize Single Image Switching.....................................................................................7
How to Set up the Size and Position of the Single Image..........................................................8
How to Set up the PIP.................................................................................................................8
How to Choose the Signal Source in PIP...................................................................................9
How to Set up the Size and Position of PIP...............................................................................9
How to Set up the Layout of PIP...............................................................................................10
How to Realize the Screen Size and Full Size Switching.........................................................10
How to Realize the Text Overlay setting...................................................................................11
How to Save the Parameter......................................................................................................12
How to Load the Saved Parameter...........................................................................................12
Product Application...............................................................................................................................13
Multiple mosaic and LED Display beyond normal control resolution mosaic..................................13
Contact Information...............................................................................................................................17
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
2
Product Introduction
VSP 168HD is a 4 inputs seamless switcher
and scaler. VSP 168HD supports all common
video and graphic inputs, including 1 CVBS, 1
VGA, 1 DVI, 1 SDI (Option). VSP 168HD
meets high end presentation requirement as
its qualified image quality and advanced video
processing ability, take multiple cascade
mapping for example.
VSP 168HD supports following main
functions: max output resolution up to
2048×1152 or 2560×816, quick user config
scale operation, seamless switching for the
inputs, auto input detect, multiple cascade
mapping.
In addition, VSP 168HD use fiber and
HDBaseT output interface, and connect to
LED Display via extender, which is especially
suitable for the applications that need high
quality, long distance transmission and high
resolution image. VSP 168HD supports
RS232 control and USB port upgrade. And
through embedded high quality image
processing functions, and format conversion
function, VSP 168HD provides the high
stability of working hours.
System Connection
RGBlink offers solutions to
demanding technical problems.
Any application questions, or
required further information,
please contact with our
customer Support Engineers.
VSP 168HD System Connection Diagram
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
3
Packing Configuration
Note: SDI cable is only for VSP 168SHD.
Chinese Standard,American Standard or European Standard power line is option.
Power Line
USB Cable
SDI Cable
DB9 to RJ11
Cable
RCA to BNC
Cable
DVI 转HDMI 线
SFP Module
DVD Disk
防静电袋
Certification
DVI to HDMI
Cable
Antistatic Bag
Quick Start
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
4
Hardware Orientation
Front Panel
Button Instruction
CV
CVBS signal source button
SPLIT
Split button
HDMI
HDMI signal source button
COM
Cascade button
SDI
SDI signal source button
SAVE
Save button
VGA
VGA signal source button
LOAD
Load button
YPbPr
YPbPr signal source button
0~9
Number button, use for scale and
custom setting
BLACK
Black button
LCD Panel
Show operation menu items
MENU
Menu button
Knob
Confirm and adjust LCD menu
SCALE
Scale button
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
5
Back Panel
Input Interface
3
3G SDI input BNC port
4
SDI Loop Out BNC port
8
CVBS Input BNC port
9
VGA Input DSUB15 port
10
HDMI Input HDMI-A port
11
HDMI Loop Out HDMI-Aport
Other Interface
1
RS232 Interface
2
USB Interface USB-B port
14
Power IEC-3
Output Interface
5
Fiber Output LC port
6
SDI Output BNC port
7
HDBaseT Output RJ45 port
12
DVI Output DVI-I port
13
DVI+VGADVI-I Output
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
6
Operating Instruction
Content
How to Do Customized Output Resolution
How to Realize Single Image Switching
How to Set up the Size and Position of Signal Image
How to Set up the PIP
How to Choose the Signal Source in PIP
How to Set up the Size and Position of PIP
How to Set up the Layout of PIP
How to Realize Screen Size and Full Size Switching
How to Realize the Text Overlay setting
How to Save the Parameter
How to Load the Saved Parameter
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
7
How to Do Customized Output Resolution
1. Push [MENU] button to enter the menu items, turn knob and go to [OUTPUT FORMAT], push knob
and confirm to go into the [OUTPUT FORMAT] menu.
2. Push knob and go into [CUSTOMIZED] menu.
3. Turn knob on each bit position, and change the value of the bit by the digital buttons on the front
panel.
4. After the digital push knob will add ×, means before ×is the horizontal size. Same operation for
vertical size.
5. After the digital push knob will add @, means before @ is the vertical size. Same operation by push
digital buttons to set the refresh rate.
6. After input all the values, push knob to enable VSP 168HD to output this resolution. VSP 168HD will
take 5 to 10 seconds to enable this output resolution.
How to Realize Single Image Switching
1. Boot the system default CV1 to the current input source (key lights and flashes), if need seamless
switching other source such as VGA, push VGA button.
2. Choose VGA buttons, button CV1 light is off, and VGA button lights and flashes, it can realize single
picture of input signal source switching (switch CV1 to VGA).The same method can switched HDMI
and SDI.
Note: Seamless switch: means signal switch will not appear any flash point, black, shaking or delay.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
8
How to Set up the Size and Position of the Single Image
1. Push MENU button to enter the menu items.
2. Rotate the knob, choose [OUTPUT].
3. Push the knob to confirm, rotate the knob again, choose [SCALE].
4. Push the knob to confirm, and enter [SCALE] option, rotate the knob to choose the corresponding
parameters and set to default values, (the default value can also be set via the number button), after
setting, push the knob to confirm.
5. If the operation is wrong, or need to factory resetting, user can enter the [SCALE] option and choose
“RESET” to recover factory reset.
How to Set up the PIP
1. Push MENU button to enter the menu items.
2. Rotate the knob and choose [OUTPUT].
3. Push the knob to confirm, rotate the knob again, choose [PIP].
4. Push the knob to confirm, rotate the knob, choose ON and confirm, then start PIP mode.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
9
How to Choose the Signal Source in PIP
1. Push MENU button to enter the menu items.
2. Rotate the knob, choose [OUTPUT].
3. Push the knob to confirm, rotate the knob again, choose [PIP].
4. Push the knob to confirm, rotate the knob again, choose [SELECT], choose IMAGE Aas main image.
5. Push CV, VGA, HDMI, SDI as the input signal of Image A.
6. The same steps, select the IMAGE B as sub-image, push CV, VGA, HDMI, SDI as the input signal
Image B.
7. With above steps, can complete the choice of signal source in PIP.
How to Set up the Size and Position of PIP
1. Push MENU button to enter the menu items. Rotate the knob, choose [OUTPUT].
2. Push the knob to confirm, rotate the knob again, choose [PIP].
3. Push the knob to confirm, rotate the knob again, choose [SELECT], choose IMAGEAas main image.
4. Push MENU button, rotate the knob, choose [OUTPUT], enter and choose [SCALE]. User can set the
size and position of IMAGEA according to actual need.
5. After setting, with the same steps, choose IMAGE B as the sub-image, and the setting is the same
with IMAGE A.
Andere Handbücher für VSP 168HD
2
Inhaltsverzeichnis
Andere RGBlink Matrix-Umschalter Handbücher
