RGBlink bond 6 Bedienungsanleitung
Quick Start
bond 6
©Xiamen RGBlink Science & Technology Co., Ltd.
1
Content
Product Overview...................................................................................................................................................................1
Key Features........................................................................................................................................................................... 1
Specification........................................................................................................................................................................... 1
Interface................................................................................................................................................................................. 2
Screen logo Instruction.......................................................................................................................................................... 3
How to Config......................................................................................................................................................................... 4
WIFI Connection..................................................................................................................................................................... 6
How to Change Password...................................................................................................................................................... 6
How to Apply.......................................................................................................................................................................... 7
Support................................................................................................................................................................................... 1
©Xiamen RGBlink Science & Technology Co., Ltd.
2
Product Overview
Key Features
Specification
● Bonding Network Router
● 5*USB port for TD-LTE standard Dongle
● Bonding up to 5 Dongle and 1 LAN together
● WAN external broadband bonding
● 2.4GHz+5.8GHz dual-band wifi
● wifi hotspot sharing
● Real-time status on LCD screen
● Optional built-in lithium battery with higher capacity
● 1/4 screw hole for rack mounting
Connectors
USB 2.0
5×USB-A
LAN
1×RJ45
Power
1×DC jack
Performance
CPU
Quad-core Cortex-A7 CPU
RAM
512MB
EMMC
8GB
WIFI
2.4G +5.8G
Bandwidth
60Mbps
Power
Input Voltage
DC 12V/2A
Maximum Battery Capacity
15000mAh
Supported Battery
SN F550/750/960 | FM50/70/90 | QM91D; PAN
VBD1/VBD2; JVC V607U/V617U
Environment
Temperature
-20 ~ 60℃
Humidity
0 ~ 65%
Physical
Dimension
135mm×91mm×32mm
©Xiamen RGBlink Science & Technology Co., Ltd.
3
Interface
No.
Item
Description
1
USB 2.0
Connect to wireless network card
2
LAN
OUT:connect to encoder,computer or other device
3
Power Switch
Press to turn on / off
4
Indicators
:flashing red:bonding
:flashing blue:WIFI data uploading/downloading
:static green:plug in power
5
Power Jack
DC 12V/2A
6
LCD Screen
Showing network status
6
5
4
3
2
1
©Xiamen RGBlink Science & Technology Co., Ltd.
4
Screen logo Instruction
Power on the device first, waiting bonding for 2~5 minutes.
IP address will be seen after successful bonding.
No.1 USB port: disconnect to network;
Please check the SIM card installation and whether the SIM card runs out of
credits.
No.1 USB port: connect to network;
Signal value:0%~5%
No.1 USB port: connect to network;
Signal value:25%~50%
No.1 USB port: connect to network;
Signal value:50%~75%
No.1 USB port: connect to network;
Signal value:75%~100%
No.1 USB port: connect to network but does not acquire signal value, which
does not affect bonding.
Ethernet port: connect to network via network cable and be bonding.
Ethernet port: plug in network cable but does not connect to the network.
Please check whether the cable connection is normal.
Upload date speed,2 seconds later than actual speed.
Download date speed,2 seconds later than actual speed.
Battery level (once optional battery installed)
©Xiamen RGBlink Science & Technology Co., Ltd.
5
How to Config
Step 1: Directly connect a laptop to the bond router via LAN cable. The bond router has a DHCP server and will
provide an IP address to a connected laptop that is set for default (DHCP) network configuration.
Step 2: Check network settings in the laptop to confirm IP address is in the same subnet as the bond router -
192.168.100.xxx.
Step 3: Open a browser window and enter 192.168.100.1 in the address bar. This IP address is default, preset IP
address of the bond router.
To login use the unique login details provided to you (User name and Password).
Step 4: Plug Dongles with SIM card inside to USB port and then directly connect TAO 1pro to the bond router via
LAN cable as shown below.
©Xiamen RGBlink Science & Technology Co., Ltd.
6
Step 5: Press the power switch .
Step 6: Check network settings in the LCD screen shown as below to confirm the IP address of cloud server.
Step 7: Click【Status】to check the bonding status.
WIFI Connection
©Xiamen RGBlink Science & Technology Co., Ltd.
7
Plug the Dongle to the bond router or connect the bond router to a ethernet router, and connect the wifi in your
computer of phone.(name:RGBlink,password:provided to you)
After wifi connection,check the IP address of your laptop/phone and enter it in a browser window,and then
settings can be done to the router.(the operation steps as the same with<How to Config>)
How to Change Password
Step 1:Navigate to the【Network】--【Wireless】--【Edit】
Step 2:Navigate to the【Interface Configuration】--【Wireless Security】, revise the key and then click【Save】.
Step 3: Click【Save&Apply】,power off the bond 6 and restart again,the settings will make effect.
©Xiamen RGBlink Science & Technology Co., Ltd.
8
How to Apply
The bond router can work with TAO 1pro.
Connect TAO 1pro to the router via LAN port to stream to network platforms, such as YouTube, Twitter and so on.
The wiring diagram as shown below:
Step 1: Plug a Dongle with SIM card inside to USB port.
Step 2: Directly connect TAO 1pro to the bond router via LAN cable.
Step 3: Press the power switch.
Step 4: Check network settings in the LCD screen to confirm IP address is in the same subnet as the bond router -
192.168.100.xxx.
©Xiamen RGBlink Science & Technology Co., Ltd.
1
Support
Inhaltsverzeichnis
Andere RGBlink Netzwerk-Router Handbücher
