Rice Lake RL-MPS Bedienungsanleitung
102696
Rice Lake Mechanical Physician Scale
Model RL-MPS, RL-MPS-10, RS-MPS-20
Operation Instructions
Contents
1.0 Introduction................................................................................................................................. 1
2.0 Installation Instructions............................................................................................................... 2
2.1 Pillar Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.2 Steelyard Rod Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 3
2.3 Height Rod Installation (for those models equipped with height rod) . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 Wheel Installation (for those models equipped with wheels) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.0 Zero Adjustment........................................................................................................................... 7
4.0 Troubleshooting ........................................................................................................................... 8
5.0 Specifications.............................................................................................................................. 8
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com or obtained
by calling 715-234-9171 and asking for the training department
© Rice Lake Weighing Systems. All rights reserved. Specifications subject to change without notice.
Model RL-MPS, RL-MPS-10, RL-MPS-20, Rice Lake Weighing Systems is an ISO 9001 registered company.
November, 2012
ii Mechanical Physician Installation and Operation Instructions
Rice Lake continually offers web-based video training on a growing selection
of product-related topics at no cost. Visit www.ricelake.com/webinars.
1
1.0 Introduction
The Rice Lake Mechanical Physician Scale is ideal for use in health clinics and doctors’ practices for height and
weight measurement. The scale comes in a variety of configurations. Those configurations include:
• RL-MPS: Lb/kg model with height rod and rear wheels
• RL-MPS-10: Lb only model with height rod and rear wheels
• RL-MPS-20: Lb/kg model
The scale is durable, having a sturdy enameled steel body, removable slip resistant plastic cover and some
models come with a retractable aluminum height rod and rear wheels. These installation and operating
instructions will guide the user through basic instructions on pillar assembly, wheel installation, pillar height rod
installation, and the zero adjustment of the scale.
Figure 1-1. Mechanical Physician Scale Parts Breakdown (lb/kg version with height rod and rear wheels shown)
This manual can be viewed and downloaded from the Rice Lake Weighing Systems web site
at www.ricelake.com/health. Rice Lake Weighing Systems is an ISO 9001 registered
company.
Weight beam
Height rod (if
applicable to model
selected)
Pillar
Platform/Scale Base
Rear wheels (if
applicable to model
selected)
Frame
Poise weight (upper
small and lower large)
Internet
2Mechanical Physician Scale Installation and Operation Instructions
2.0 Installation Instructions
You will receive your Mechanical Physician Scale partially assembled. Those items that need additional
assembly are:
• Pillar assembly
• Steelyard rod connection
• Height rod installation (for models having a height rod)
• Wheel installation (for models having wheels)
Remove all components from the shipping box (shown in Figure 2-1) and lay out in a convenient place.
Figure 2-1. Box Contents
2.1 Pillar Installation
Prior to assembly, you’ll need the following tools to finish assembling the Mechanical Physician Scale.
• Phillips head screwdriver
• Wrench (included)
The pillar comes separate from the scale base and must be attached prior to use. Use the following steps to attach
the pillar to the scale base.
1. Set the scale base on a table or other convenient place.
2. Remove the twisty ties off the scale base as shown on the left hand side of Figure 2-2. Remove the cable
tie that holds the steelyard rod from shifting during transit (shown on right side of Figure 2-2).
Figure 2-2. Remove Twisty Ties and Cable Ties
Remove twisty ties from
scale parts
Remove cable tie from steelyard rod
Mechanical Physician Scale Installation and Operation Instructions - Installation Instructions 3
3. Insert the pillar into the scale base assembly ensuring that the RLWS logo located on the weight beam
faces the scale base.
Figure 2-3. Attach the Pillar to the Scale Base
4. Using a phillips head screwdriver, screw in the eight bolts and washers to secure the pillar to scale base.
Figure 2-4. Attach Eight Bolts and Washers to Secure the Pillar to the Scale Base
Scale base
Pillar
4Mechanical Physician Scale Installation and Operation Instructions
2.2 Steelyard Rod Connection
The steelyard rod is located inside the scale pillar. Once the pillar is attached to the scale base, the steelyard rod
must be attached to the bottom of the scale.
1. Lay the scale on a table as shown in Figure 2-5.
Figure 2-5. Lay Scale on Table to Access Bottom of Scale
2. There are tie wrap wires that prevent the underside of the scale carriage from shifting during shipping.
Remove and discard the wires on the levers as shown in Figure 2-5.
3. Insert the wrench (included) to the small hole in front of the steelyard rod, and pull the hook of the
steelyard rod with the hook of the wrench to connect it to the scale base as shown in Figure 2-6.
Figure 2-6. Connecting the Steelyard Rod to the Scale Base
4. Push the long lever frontward, then hook the bearing of the steelyard rod on the pivot of the long lever.
NOTE: Visually ensure that the force lever assembly linkage is centered and properly aligned. Occasionally during
shipping, the alignment will become skewed however a plug is installed to ensure that the linkage stays aligned. The
linkage must be free floating in order for the scale to weigh properly. The linkage can be seen by looking up underneath
Mechanical Physician Scale Installation and Operation Instructions - Installation Instructions 5
the top weigh beam if the scale is slightly tipped to one side.
Figure 2-7. View Looking up at Linkage up Underneath the Top Weigh Beam
5. Place the scale gently back on the floor.
Force lever
assembly
linkage must
be properly
aligned in
order to
weigh
Linkage
alignment
plug
6Mechanical Physician Scale Installation and Operation Instructions
2.3 Height Rod Installation (for those models equipped with height rods)
Some models of the Mechanical Physician Scale comes with height rods. Use the following steps to install the
height rod.
1. Insert the back side slotted holes of the height rod into the two bolts on the front side of the pillar as
shown in Figure 2-8. One is located at the top of the pillar and the other towards the bottom of the pillar.
Figure 2-8. Attach the Slotted Screw Location onto the Pillar Bolt Location
2. Use the enclosed wrench to tighten the two hex-head screws, but ensure not to over tighten.
3. To raise or lower the height rod, press the red button at the top of the height rod and raise up or down.
Slotted holes
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Rice Lake Skala Handbücher
Rice Lake
Rice Lake RL1100EM Bedienungsanleitung
Rice Lake
Rice Lake CLS420 Bedienungsanleitung
Rice Lake
Rice Lake RL-DBS Bedienungsanleitung
Rice Lake
Rice Lake SURVIVOR RL1700 HE Bedienungsanleitung
Rice Lake
Rice Lake RL-350-2 Bedienungsanleitung
Rice Lake
Rice Lake SURVIVOR CW-80 Bedienungsanleitung
Rice Lake
Rice Lake 340-10 Series Betriebsanleitung
Rice Lake
Rice Lake SURVIVOR PT Bedienungsanleitung
Rice Lake
Rice Lake equipoise Bedienungsanleitung
Rice Lake
Rice Lake RL-DBS Bedienungsanleitung
Rice Lake
Rice Lake Digi DC-100 Bedienungsanleitung
Rice Lake
Rice Lake 260-10-1 Bedienungsanleitung
Rice Lake
Rice Lake Summit SD-1150-WP Bedienungsanleitung
Rice Lake
Rice Lake RL150-10-5 Betriebsanleitung
Rice Lake
Rice Lake MB Series Bedienungsanleitung
Rice Lake
Rice Lake TP Series Bedienungsanleitung
Rice Lake
Rice Lake DHH-10BT Bedienungsanleitung
Rice Lake
Rice Lake RL1200 Bedienungsanleitung
Rice Lake
Rice Lake 350-10-3M Bedienungsanleitung
Rice Lake
Rice Lake IQ plus 2100SL Bedienungsanleitung
