Rice Lake TE Series Bedienungsanleitung

TE Series Tuning Fork Balance

Ethernet Option Installation

The Ethernet Option (PN 186079) provides an RJ-45 port for Ethernet output communication from the TE Series Balance. This

document describes the installation procedures and communication settings for the Ethernet Option.

To ensure safe and proper use of the balance, completely read this documentation and the TE Series Operation

Manual (PN 185193) before use. Store both documents in a safe place near the balance to review as needed.

Manuals and additional resources are available from the Rice Lake Weighing Systems website at www.ricelake.com

Warranty information can be found on the website at www.ricelake.com/warranties

Unpacking and Option Parts

Immediately after unpacking, visually inspect and ensure all components are included and undamaged. If parts were damaged

in shipment, notify Rice Lake Weighing Systems and the shipper immediately.

Figure 1. Ethernet Option Parts Illustration

Option Installation

Make sure that the power is disconnect before installation of the Ethernet Option.

1. Remove the screw securing the option slot cover and remove the option slot cover.

Figure 2. Remove Option Slot Cover

2. Insert the option board along the rail of the option slot until surface of the option faceplate is flush with the balance

chassis within 0.5 mm.

3. Secure the option in place with the screw previously removed.

Figure 3. Insert and Secure Option

Use LAN cable of “CAT 5” or higher. When using a non-shielded LAN cable, attach the included ferrite core

approximately 2'' from the connector.

IMPORTANT

Ethernet Option Board Removal Screw Ferrite Core

CAUTION

Note

PN 205762 Rev A

March 12, 2021

230 W. Coleman St. • Rice Lake, WI 54868 • USA

U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319

Rice Lake Weighing Systems is an ISO 9001 registered company.

www.ricelake.com

PN 205762 Rev A

March 12, 2021

TE Series Balance Ethernet Option

Communication Settings

The Ethernet Option board is equipped with “Xport” manufactured by Lantronix. Refer to the External Input/Output Functions

and Communications sections in the TE Series Operation Manual (PN 185193) for information on settings and configuration.

“Baud Rate”, “Parity”, “Stop Bit”, and “Response Command” are associated to the internal communication between

the balance and the Ethernet Option, not the external communications. If these settings have been changed,

reconfigure them to the default values.

IP Address Setting

1. Download DeviceInstaller on a PC:

a. Go to the website: https://www.lantronix.com/products/DeviceInstaller/

b. Click Download Software.

c. Download the file name: Stand-alone DeciveInstaller Setup application for Windows (125 MB)

2. Install DeviceInstaller on PC.

3. Connect the balance to the network:

a. Connect the balance with the Switching Hub and power on the balance.

b. Through the PC’s Start Menu, go to “Lantronix” → “DeviceInstaller”.

c. Once DeviceInstaller is open, press F1 on the keyboard to access the DeviceInstaller Help file.

The Ethernet Option MAC address is indicated on the faceplate of the option under the port.

Communication Specifications

Connector RJ-45 (8P8C)

Interface Ethernet 10Base-TX (auto-sensing)

Version Version 2.0 / IEEE 802.3

Protocols TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, Auto IP

Management Start bit Internal Web server, SNMP (read only), Serial login, Telnet login, Microsoft Windows-based utility for configuration

Security Parity bit Password protection, Optional 256-bit AES Rijndael encryption

Option Removal

Make sure that the power is disconnect before removal of the Ethernet Option.

1. Remove the screw securing the option.

2. Insert the removal screw to pull out the option from the balance.

Figure 4. Option Removal

Note

CAUTION

Andere Handbücher für TE Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rice Lake Skala Handbücher

Rice Lake

Rice Lake RoughDeck FXB Bedienungsanleitung

Rice Lake

Rice Lake CLS-M Bedienungsanleitung

Rice Lake

Rice Lake TS Series Bedienungsanleitung

Rice Lake

Rice Lake 140-10 Series Bedienungsanleitung

Rice Lake

Rice Lake RL-MPS-50 Bedienungsanleitung

Rice Lake

Rice Lake Master BS211 Bedienungsanleitung

Rice Lake

Rice Lake Summit SB-1000 Bedienungsanleitung

Rice Lake

Rice Lake 260-10-1 Bedienungsanleitung

Rice Lake

Rice Lake Summit SB-1150 Bedienungsanleitung

Rice Lake

Rice Lake D1100 Series Bedienungsanleitung

Rice Lake

Rice Lake Digi DS-160 Bedienungsanleitung

Rice Lake

Rice Lake RoughDeck BDP Bedienungsanleitung

Rice Lake

Rice Lake BenchMark Series Beilage

Rice Lake

Rice Lake 350-10-3M Bedienungsanleitung

Rice Lake

Rice Lake Versa-portion RLP-S Bedienungsanleitung

Rice Lake

Rice Lake RS-130 Bedienungsanleitung

Rice Lake

Rice Lake RL-TA Series Bedienungsanleitung

Rice Lake

Rice Lake DeckHand Handbuch

Rice Lake

Rice Lake Digi DI-28 Bedienungsanleitung

Rice Lake

Rice Lake DHH-10 Bedienungsanleitung

Rice Lake

Rice Lake Ishida Uni-7 Series Benutzerhandbuch

Rice Lake

Rice Lake DIGI DC-150 Bedienungsanleitung

Rice Lake

Rice Lake RS-130 Bedienungsanleitung

Rice Lake

Rice Lake SURVIVOR RL1700 HE Bedienungsanleitung

Beliebte Skala Handbücher anderer Marken

AWS

AWS ZEO-50 Bedienungsanleitung

Gima

Gima Glass Body Fat Analyzer Stücklistenhandbuch

Seca

Seca 374 Bedienungsanleitung

TEC

TEC TEC SL59 SERIES Bedienungsanleitung

Axis

Axis B/E Series Bedienungsanleitung

Alecto

Alecto ACW-40 Bedienungsanleitung

IKA

IKA RCT basic safety control Bedienungsanleitung

ADE

ADE M20011 Bedienungsanleitung

Duronic

Duronic KS3000 Bedienungsanleitung

Digi

Digi SM-720 Bedienungsanleitung

Cardinal

Cardinal CS Series Bedienungsanleitung

Korona

Korona Kastella Bedienungsanleitung

A&D

A&D FC-50Ki Bedienungsanleitung

BDA

BDA CAMARGUE Bedienungsanleitung

Tanita

Tanita HD-357 Bedienungsanleitung

Leifheit

Leifheit 03173 Bedienungsanleitung

Lumme

Lumme LU-1340 Bedienungsanleitung

Fidelity Electronics

Fidelity Electronics G2e Bedienungsanleitung