Ricoh Aficio MP 201SPF Bedienungsanleitung

©Page 1 of 5

Ricoh MP 201SPF Quick Guide

Originals should be face-up in the document feeder, face-down on glass

Push the Clear Modes button before carrying out jobs

Copy

BASIC COPY

1. Select the Copy button

2. Place your originals in the document feeder

3. Select the number of copies using the blue number keys

4. Press the Sort button if you wish to have your copies collated or sorted.

5. Press the green Start button

©Page 2 of 5

2SIDED COPIES (DUPLEX)

1. Place your originals in the document feeder

2. Press the Duplex button

3. Press the arrow up or down keys to select style of 2 sided you would like

4. Press the OK key to confirm your selection, the word Programmed will appear at the

top of the display

5. Press the Start button

2SIDED ORIGINALS INTO 1SIDED COPIES

1. Place your originals in the document feeder

2. Press the Combine/Series button

3. Press the arrow up or down keys to the last screen and ensure 2 sided originals to 1

sided copy is highlighted

4. Press the OK key to confirm your selection, the word Programmed will appear at the

top of the display

5. Press the Start button

REDUCE OR ENLARGE COPIES

1. Place your originals in the document feeder or on the glass

2. Press the R/E button on the panel display

3. Press the arrow button below R/E. Press this button until you have highlighted the

option you would like

4. Press the OK button to confirm your selection

5. Press the Start button

Fax

SEND A FAX

1. Select the Facsimile button

2. Dial the number using the blue numeric key pad or press the pre programmed button(s)

on the left hand side

3. Place your originals in the document feeder or on the glass

4. Press the Start button

If you have placed your originals on the glass, once you have dialed the number and pressed the Start

button, the display will start a 60 second countdown. This is allowing you to change the original, place

©Page 3 of 5

the next original and press the Start button for the remaining originals. If you only have a one page

document, press the pound key “#” and the fax machine will start sending the document immediately.

SEND FAX -2SIDED ORIGINAL

1. Press Tx Mode (on the panel)

2. Use the arrow keys to select 2 Sided Tx, press OK

3. Use the arrow keys to select 2 Sided from the first page OR 1 Sided from the first page

if you are using a cover page that is single sided¨or other selection, press OK, press esc

when done

4. Dial the number using the numeric key pad or press the pre programmed button(s) on

the left hand side

5. Place your originals in the document feeder

6. Press the Start button

Note: when sending a fax you can look up the pre-programmed fax numbers by pressing the Check

Destination button, choose one of the search options (i.e. list) and select it for sending, press Start

PROGRAM FAX NUMBERS IN THE ADDRESS BOOK

1. Press the User Tools /Counter button

2. Select System Settings by using the arrow keys and press OK

3. Arrow down and select Administration Tools press OK

4. Arrow down and select Address Book Management press OK

5. Select Program/Change to program or change an existing quick dial and press OK

6. The first available quick dial location will appear or make your selection from (001-032) by

using the numeric keypad and press OK.

7. Enter the name using the quick dial keypad, (example: using the speed dial keypad on the

left hand side press the 01 button once for the “A” or twice for a “B” or three times for a

“C” use the arrow keys near the display to cursor over. Use the 02 button for D E or F)

8. Press OK.

9. Select Details

10. Select Fax Setting then press OK

11. Enter the fax number using the blue numeric keypad, press OK

12. Press END, press OK

©Page 4 of 5

To continue programming, continue from step 5 Address Book Management

OR to exit, press User Tools button

DELETE FAX NUMBERS IN THE ADDRESS BOOK

1. Press the User Tools /Counter button

2. Select System Settings by using the arrow keys and press OK

3. Arrow down and select Administration Tools press OK

4. Arrow down and select Address Book Management press OK

5. Select Delete to program or change an existing quick dial and press OK

6. Select the number you want to delete, press OK

7. Press Yes to confirm

8. Press User Tools button to exit

Note: you may get a message on the panel: “Settings have been updated. The selected

dest./functions have been cancelled Just press Exit on panel.

Scanning

SEND A DOCUMENT TO YOUR E-MAIL ADDRESS OR FOLDER

1. Press the Scanner button

2. Press the pre programmed button(s) on the left hand side where your e-mail address or

folder has been programmed or search for the address by clicking

3. Place your originals in the document feeder or on the glass

4. Press the Start button

If you have placed your originals on the glass, once you have dialed the number and

pressed the Start button, the display will start a 60 second countdown. This is allowing

you to change the original, place the next original and press the Start button for the

remaining originals. If you only have a one page document, press the pound key “#” and

the machine will start scanning the document immediately.

SCAN A 2SIDED ORIGINAL

1. Press Options (in the panel)

2. Select Original Settings, press OK

3. Use the arrow keys to select 2 Sided Original

4. Press OK

5. Use the arrow keys to select “T to T” meaning Top to Top double sided like a book

OR “T to B” meaning Top to bottom like a calendar

6. Press OK

©Page 5 of 5

7. Press the pre programmed button(s) on the left hand side where your e -mail

address or folder has been programmed

8. Place your originals in the document feeder

9. Press Start button

Note: when scanning you can look up the pre-programmed email addresses by pressing the Check

Destination button, choose one of the search options (i.e. list) and select it for sending, press Start

CHANGE THE FILE FORMAT WHEN SCANNING

1. Press Options in the panel

2. Use the arrow keys to select File type

3. Use the arrow keys to select PDF or “TIFF

4. Press OK

5. Press the pre programmed button(s) on the left hand side where your e-mail address or

folder has been programmed

6. Place your originals in the document feeder

7. Press Start button

HOW TO PROGRAM EMAIL ADDRESSES IN THE ADDRESS BOOK

1. Press the User Tools /Counter button

2. Select System Settings by using the arrow keys and press OK

3. Arrow down and select Administration Tools press OK

4. Arrow down and select Address Book Management press OK

5. Select Program/Change to program or change an existing quick dial and press OK

6. The first available quick dial location will appear or make your selection from (001-032) by

using the numeric keypad and press OK.

7. Enter the name using the quick dial keypad, (example: using the speed dial keypad on the

left hand side press the 01 button once for the “A” or twice for a “B” or three times for a

“C” use the arrow keys near the display to cursor over. Use the 02 button for D E or F) press

OK.

8. Select Details

9. Select E-mail Settings then press OK

10. Enter the e-mail address using the numeric keypad and then press OK

11. Select E-mail/Internet Fax Dest. and then press the OK key

12. Select On or Off to specify whether or not SMTP server is to be used

13. Press OK

14. Press End

15. Press OK

To continue programming, continue from step 5 Address Book Management or to exit, press User Tools

button

Andere Handbücher für Aficio MP 201SPF

Inhaltsverzeichnis

Andere Ricoh Multifunktionsdrucker Handbücher

Ricoh

Ricoh Pro C5100S Bedienungsanleitung

Ricoh

Ricoh AP2600 Bedienungsanleitung

Ricoh

Ricoh P800 Bedienungsanleitung

Ricoh

Ricoh Aficio MP 5002SP Bedienungsanleitung

Ricoh

Ricoh C211 Bedienungsanleitung

Ricoh

Ricoh Aficio 1085 Bedienungsanleitung

Ricoh

Ricoh B867 Bedienungsanleitung

Ricoh

Ricoh Sargas-PJ1 Kurzanleitung

Ricoh

Ricoh B064 SERIES Bedienungsanleitung

Ricoh

Ricoh Aficio MP C3500 Bedienungsanleitung

Ricoh

Ricoh MP W7100 Bedienungsanleitung

Ricoh

Ricoh Pro C7100s Merkblatt

Ricoh

Ricoh MP C3004 series Kurzanleitung

Ricoh

Ricoh Aficio IS2316L/2320l Bedienungsanleitung

Ricoh

Ricoh SP3200SF - Aficio SP B/W Laser Bedienungsanleitung

Ricoh

Ricoh Aficio MP 301SPF Bedienungsanleitung

Ricoh

Ricoh MP 2553 Handbuch

Ricoh

Ricoh 1000SF - Aficio SP B/W Laser Bedienungsanleitung

Ricoh

Ricoh PRIPORT VT2130 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Ricoh

Ricoh Aficio MP C3001 Bedienungsanleitung

Ricoh

Ricoh K-C3 Bedienungsanleitung

Ricoh

Ricoh Aficio IS 2315 Bedienungsanleitung

Ricoh

Ricoh 9016 Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung