Ricoh RDC-5000 Bedienungsanleitung
Before Using the Camera ..................................... 26
Checking the Package Contents ................... 26
Attaching the Wrist Strap ............................... 26
Powering the Camera ........................................... 27
Loading the AA Batteries ............................... 27
Using an AC Adapter ...................................... 29
SmartMedia Memory Cards ................................. 31
What is a SmartMedia Memory Card? .......... 31
Inserting a SmartMedia Memory Card .......... 32
Formatting a SmartMedia Memory Card....... 33
Before You Start Recording ................................ 35
Setting the Date and Time .............................. 35
Adjusting the LCD Monitor Brightness ........ 37
How to Hold the Camera................................. 37
ChapterGETTING STARTED
1
26
Before Using the Camera
Checking the Package Contents
Check that your digital camera comes complete with all the accessories listed below.
Read the warranty card and keep it in a safe place.
• Digital camera: .................................................. 1
• Video interface cable:........................................ 1
• Soft case: .......................................................... 1
• AA alkaline batteries: ........................................ 4
• Wrist strap: ........................................................ 1
• Operation manual (this manual): ....................... 1
• Warranty card:................................................... 1
• PC connection cable (RS-232C) ....................... 1
• Macintosh cable (AUX) ..................................... 1
• USB cable ......................................................... 1
• Software CD-ROM ............................................ 1
Attaching the Wrist Strap
Attach the wrist strap provided to prevent the camera from being dropped during use.
qPass the small loop of the strap through the wrist
strap eyelet and pass the other end through the
loop as illustrated.
Important
Note
• Do not swing the camera around by its
strap.
27
Getting Started
1
Powering the Camera
This section explains how to load the batteries (AA alkaline batteries) into the camera
and how to connect the AC adapter to power the camera from a household electrical
outlet.
Loading the AA Batteries
Mount AA batteries and operate the camera.
•If you use commercial batteries, use of rechargeable AA batteries (nickel-
cadmium or nickel-metal-hydride batteries) is recommended.
Rechargeable Batteries
•Before using commercially available rechargeable AA Ni-Cd or AA Ni-MH batteries,
read the safety precautions in the accompanying manual.
•Use only the specified AA batteries.
•Never use batteries of an unrecommended type, such as manganese battery,
as this could damage the camera or LCD monitor and cause them to fail.
•Certain types of batteries may become hot after an extended period of use.
Allow them to cool before unloading them.
•Do not use commercially available batteries that are designed for specific
kinds of equipment (such as those marked “For CD players only”) in this
product.
•When purchasing batteries, read the battery instructions carefully to make
sure that they can be used for this product.
•Remove the batteries form the camera before leaving it out service for long.
Important
Note
Note
28
qCheck that the camera is turned off, and
then open the battery cover by pressing
the catch and sliding it in the direction
shown.
“Turning on the Camera”(p.41)
wLoad the batteries.
•Make sure that the batteries are loaded
with the positive (+) and negative (–)
terminals correctly oriented. Do not bring
metallic objects, such as a needle, into
contact with the battery contact surfaces
or electrical connections. Electrostatic
damage could result.
eClose the battery cover
Close the battery cover until it clicks into position.
■Economizing on Batteries
Use of rechargeable Size AA Ni-Cd or AA Ni-MH batteries is recommended for most
applications.
If a power source is available nearby, you can economize on the batteries by using an
AC adapter (optional).
In shooting pictures, having the LCD monitor display turned off will help your batteries
longer-lived.
●Shooting and Playback Guidelines
The table below gives the approximate recording and playback times that are available
with Size AA alkaline batteries, as measured under the following test conditions:
[Test conditions]
During shooting: Shoot continuously in a recording mode (shoot at an interval of
30 seconds, without turning off the camera in the middle, with the
flash fired 50%, at a 25™⁄ ambient temperature).
During playback: Leave the camera continuously turned on in a playback mode at
a 25™⁄ room temperature.
See
Important
Note
29
Getting Started
1
Battery type Approximate Approximate
Recording Time Playback Time
Size AA alkaline batteries 60 minutes 90 minutes
Ni-Cd batteries (1000 mAh) 40 minutes 60 minutes
Note
Tips to Extend the Recording and Playback Times
* The battery lives indicated above tend to narrow depending on the ambient
environment.
* In an extremely cold environment, warming the batteries by hand, for example, could
allow you to take more pictures. Where the ambient temperature is extremely low,
use of rechargeable Ni-Cd batteries is recommend for their cold resistance.
* Choose rechargeable batteries having as high a capacitance as possible. (The
capacitance rating is marked in the unit mAh.)
* Increased use of the flash or zoom feature or the LCD monitor would speed up the
exhaustion of the batteries. Cut their usage to a minimum required.
* The available picture count tends to increase when they are recorded in the 900 ×
600 recording mode.
* Copying or erasing images repeatedly would also accelerate the exhaustion of the
batteries.
•You are advised to make spare batteries available when powering the camera
from the internal batteries alone.
•The battery symbol ( ), when lit, indicates that the camera's internal batteries
have a diminishing voltage. Make spare batteries available.
Rechargeable Size AA Ni-Cd and Ni-MH batteries have a characteristic
tendency to turn off their power immediately when the battery symbol is lit.
■ Handling Precautions
•Do not use damaged batteries or batteries at the end of their service lives.
•Do not subject the batteries to strong impacts .
Using an AC Adapter
When using the camera for extended periods of time to shoot or playback images,
connect an AC adapter (optional) to the camera and power the camera from a
household electrical source.
Using the AC Adapter
Before using the AC adapter, be sure to read the safety precautions in the
accompanying manual.
30
qCheck that the camera is turned off, and then open the terminal cover.
“Turning on the Camera”(p.41)
wConnect the AC adapter cable to the power supply terminal (DC input)
on the camera.
eInsert the power plug into the electrical outlet.
•If batteries are loaded in the camera while it is connected to a household
power source, the camera is powered from the AC source and not by the
batteries.
•Insert the power plug and connection cable securely. If the plug or cable
works loose during recording, the data may be lost or damaged.
•If you connect or disconnect the AC adapter while operating the camera
(recording, playback, or erasing), the camera will switch off to determine
the power source. This may cause the data to be lost or damaged. To
avoid this, connect or disconnect the AC adapter while the camera is
turned off.
See
Note
Important
Note
31
Getting Started
1
Note
シールを
貼る
Note
Attach a
write
protect
pad.
SmartMedia Memory Cards
This section explains the types and usage of SmartMedia memory cards.
What is a SmartMedia Memory Card?
Files are recorded as data on the SmartMedia memory card in your camera. The
following types of SmartMedia memory card can be used:
•Capacity:................... 2 MB, 4 MB, 8 MB, 16 MB, 32 MB
•Operating voltage: .... 3.3 V
•There are numerous types of SmartMedia memory cards. Before using a
commercially available SmartMedia memory card, check with its
manufacturer that it is compatible with your camera.
•By using an optional PC card adapter or floppy disk adapter, you can insert a
SmartMedia memory card directly into the PC card slot or floppy disk drive of
your PC.
■ Protecting Against Accidental Writing
Attaching a write protect pad to a SmartMedia memory
card will prevent accidental erasure or overwriting of
recorded files.
Remove the write protect pad from the SmartMedia
memory card to record or erase data.
If the write protect pad gets dirty, wipe it clean
with a soft, dry cloth.
■ Handling Precautions
●SmartMedia Memory Cards
•Never remove the SmartMedia memory card while data is being recorded or erased.
•Do not bend, subject to strong force or shock, or drop the SmartMedia memory card.
•Avoid using or storing SmartMedia memory cards in environments that are subject to
static electricity or electrical interference.
•Avoid using or storing SmartMedia memory cards in environments that are subject to
high temperature and humidity, where dust accumulates, or in atmospheres where
corrosive substances are present.
•Keep the contact surface of the SmartMedia memory card clean and free from dust
and foreign matter. Should the contact surface get dirty, wipe it clean with a soft, dry
cloth.
32
•Keep the SmartMedia memory card slot free from dust and foreign matter.
•To avoid possible hazards, keep SmartMedia memory cards away from flames and
do not dispose of them in fire.
•SmartMedia memory cards have a limited service life. Cards that have been used
over an extended period of time may fail to record additional files.
●Data
•Data recorded on a SmartMedia memory card may be lost by improper handling by
the customer or a third party, by being subjected to electricity or electrical
interference, or during camera malfunction or repair. Ricoh Co., Ltd. assumes no
liability for damages incurred by such loss of recorded data.
•Do not remove the batteries from the camera, turn off the camera, or connect the AC
adapter while data is being recorded on the SmartMedia memory card. The data
stored on the SmartMedia memory card could be lost or damaged.
•You are advised to copy valuable data from the SmartMedia memory card onto other
media, such as floppy disks or hard disks.
Inserting a SmartMedia Memory Card
Check that the camera is turned off before inserting the SmartMedia memory card.
•Never insert or remove a SmartMedia memory card while the camera is
turned on.
■ Inserting Card
qCheck that the camera is turned off,
and then open the card door.
“Turning on the Camera”(p.41)
wInsert the SmartMedia memory card
into the card insert slot and close the
card door.
Push the SmartMedia memory card fully into
position, with the contact surface facing up.
Important
Note
See
Contact
surface
33
Getting Started
1
•Insert the SmartMedia memory card in the correct direction. Do not insert it at
an angle.
•The camera will not turn on when the card door is open.
■ Removing Card
qCheck that the camera is turned off, and
then open the card door.
“Turning on the Camera”(p.41)
wPress the button and pull the
SmartMedia memory card straight out of
the slot.
Pressing the button will cause the SmartMedia
memory card to pop out a little. Then, pull it
straight out of position.
eClose the card door.
Important
Note
•Never remove the SmartMedia memory card while data is being recorded
or erased. The data stored on the card could be lost or damaged.
•When the SmartMedia memory card has been removed, place it in the
antistatic case supplied or other protective cover.
Formatting a SmartMedia Memory Card
Before using a new SmartMedia memory card or a SmartMedia memory card that has
been used on another device (such as a PC), you need to format (initialize) it with the
camera.
Important
Note
•Formatting will erase all the files recorded on the SmartMedia memory
card (including protected files).
•Do not format SmartMedia memory cards on a PC.
•The SmartMedia formatted by the other device may not be used.
Note
See
34
qInsert the SmartMedia memory card and
slide the power switch to turn on the
camera.
See
“Inserting a SmartMedia Memory Card”(p.32)
“Turning On the Camera”(p.41)
wSet the mode dial to [ ].
The setup menu will be displayed.
ePress the ▼or ▲button to select
[FORMAT] and press the ENTER button.
rPress the ▼or ▲button to select
[FORMAT MEMORY CARD] and press the
ENTER button.
tPress the shutter release button.
The “FORMATTING”message is displayed
while the camera is formatting the SmartMedia
memory card.
When formatting is completed, the setup menu
will reappear. Turn the mode dial to choose
another mode.
Note
•A SmartMedia memory card with a write protect pad attached to it cannot
be formatted. Remove the pad to format the SmartMedia memory card.
MENU [FORMAT]
FORMAT MEMORY CARD
FORMAT INTERNAL MEMORY
BACK:MENU SEL.:ENTER
FORMAT MEMORY CARD
START : RELEASE
CANCEL: MENU
MENU [SET UP]
FORMAT
DATE SETTING :1999/1/1
KEEP SETTINGS
BEEP SOUND :ON
AUTO POWER OFF :ON
LANGUAGE :ENGLISH
VIDEO OUT MODE :NTSC
VERSION
SEL.:ENTER
Andere Handbücher für RDC-5000
2
Inhaltsverzeichnis
Andere Ricoh Digitalkamera Handbücher
Ricoh
Ricoh THETA Bedienungsanleitung
Ricoh
Ricoh RDC-i500 Bedienungsanleitung
Ricoh
Ricoh Pentax K-3 III Installationsanleitung
Ricoh
Ricoh 35 Bedienungsanleitung
Ricoh
Ricoh Caplio R2 Bedienungsanleitung
Ricoh
Ricoh gr digital III Bedienungsanleitung
Ricoh
Ricoh Caplio GX8 Bedienungsanleitung
Ricoh
Ricoh Caplio GX100 Bedienungsanleitung
Ricoh
Ricoh Caplio G3 Bedienungsanleitung
Ricoh
Ricoh Caplio R40 Bedienungsanleitung
Ricoh
Ricoh CX3 Bedienungsanleitung
Ricoh
Ricoh R10 Gebrauchs- und Pflegehandbuch
Ricoh
Ricoh PENTAX KF Bedienungsanleitung
Ricoh
Ricoh Caplio R 3 Bedienungsanleitung
Ricoh
Ricoh CX2 Gebrauchs- und Pflegehandbuch
Ricoh
Ricoh THETA X Bedienungsanleitung
Ricoh
Ricoh GR Digital II Bedienungsanleitung
Ricoh
Ricoh Pentax K-3 II Bedienungsanleitung
Ricoh
Ricoh CX2 Bedienungsanleitung
Ricoh
Ricoh THETA Bedienungsanleitung
