Ricoh Aficio GX e3300N Bedienungsanleitung

Ricoh GX e3300N

Note: If you experience any communication errors, a powered USB Hub may be required.

CAUTION: DO NOT INSTALL OEM INK BEFORE INSTALLING SUBLIJET-R INK.

Do not power ON the printer before installing the cartridges

INSTALLATION GUIDE

SECTIONS:

Printer Setup & OEM Driver Installation (2 pages)

OEM Driver Initialization (2 pages)

PowerDriver-R Installation (6 pages)

PAGE 1 of 2 >>

1.) Open the printer box, remove the cables and other accessories, and place them aside. Next, remove the

printer from the box, and place it on a sturdy work surface with sufficient operational clearances (the printer

weighs approximately 31 lb). Finally, remove the orange adhesive tape and attach the power cord and the

USB cable. DO NOT POWER ON THE PRINTER AT THIS TIME.

2.) Remove the SubliJet-R ink cartridges from their packages. Open the right front cover on the printer, and

insert the cartridges in the order indicated—from left to right (as you face the printer): black (K), cyan (C),

magenta (M) and yellow (Y). Press each cartridge in until it engages securely, and close the cover once all

of the cartridges are in place. Never shake or agitate the cartridges.

3.) Remove the paper tray, pull the cover straight up, and adjust the guides for the paper size you will be using.

Load the paper, put the cover back on, and reinsert the tray into the printer. For larger paper sizes, refer to

the documentation provided with your Ricoh printer for extending the paper tray.



Ricoh GX e3300N

Printer Setup & OEM Driver Installation

SubliJet-R: Ricoh GX e3300N Printer Setup & OEM Driver Installation (cont’d 2:2)

4.) Plug the power cord into a power outlet and plug the USB cable into your computer. DO NOT POWER ON

THE PRINTER AT THIS TIME.

5.) Start your computer, wait until Windows is fully operational, and then insert the Ricoh CD in the CD-ROM

drive. The CD contains the printer driver, and the program will start automatically. Follow the on-screen

instructions, beginning with the selection of the language.

6.) Once you have installed the Ricoh OEM Driver, restart your computer and proceed to the OEM Driver

Initialization portion of the installation guide.

PAGE 2 of 2 >>



Before installing the PowerDriver-R, you will need to initalize the Ricoh OEM Driver.

1.) Begin by clicking your Start icon (see Figure 1 > 1) and select Printers and Faxes (see Figure 1 > 2). This

will open the Printers and Faxes window (see Figure 2 > 1).

2.) Right-click on the Ricoh GX e3300N printer icon (see Figure 2 > 2) and select Properties (see Figure 2 > 3).

This will open the GelSprinter GX e3300N Properties window (see Figure 3 > 1).

Note: If you are running Widows 7, you will need to select Printer Properties.

PAGE 1 of 2 >>

FIGURE 1

Ricoh GX e3300N

OEM Driver Initialization

FIGURE 2

SubliJet-R: Ricoh GX e3300N OEM Driver Initialization (cont’d 2:2)

3.) Click Print Test Page (see Figure 3 > 2). A test page will print signifying that communication has been

bridged between your computer and printer.

FIGURE 3

The Ricoh e3300N OEM Driver has now been initialized and is ready to use in conjunction with

PowerDriver-R. Please proceed to the PowerDriver-R Installation portion of your Installation Guide.

PAGE 2 of 2 >>

PAGE 1 of 6 >>

1.) Visit the Sawgrass Technologies web site at www.sawgrassink.com and navigate to the PowerDriver-R

Downloads for Sublijet page (http://www.sawgrassink.com/v.php?pg=364). First highlight Technical

Support, next highlight SubliJet Technical Support, then highlight SubliJet Downloads, and nally

highlight and click on Power-Driver Downloads (see Figure 1). This will open the PowerDriver

Downloads for Sublijet window (see Figure 2).

2.) From the list, click on the name of your printer that is associated with your operating system, and save the le to

your desktop (see Figure 2).You should now see the following Executable icon on your desktop (see Figure 3).

FIGURE 1

FIGURE 3

GX e3300N_

v2.9.4.exe

FIGURE 2

Ricoh GX e3300N

PowerDriver-R Installation

PAGE 2 of 6 >>

SubliJet-R: Ricoh GX e3300N PowerDriver-R Installation (cont’d 2:6)

3.) On your desktop, double-click on the Executable icon to begin the installation (see Figure 3). This will

open the PowerDriver R GXe3300N Setup window (see Figure 4). When you are ready to begin the

installation, click Install (see Figure 4). Check that you are installing PowerDriver R GXe3300N and click

Next (see Figure 5). This will open the License Agreement window (see Figure 6).

4.) If you agree with the terms of the License Agreement, click I Agree (see Figure 6). Then, choose the

components you wish to install and click Next (see Figure 7). This will open the Choose Install Location

window (see Figure 8).

5.) Click Install and setup will install PowerDriver R in the specied Destination Folder (see Figure 8). To

install in a different folder, click browse and select another folder. Once you click Install, you will see the

installation progress bar (see Figure 9).

FIGURE 4 FIGURE 5

FIGURE 6 FIGURE 7

FIGURE 8 FIGURE 9



PAGE 3 of 6 >>

SubliJet-R: Ricoh GX e3300N PowerDriver-R Installation (cont’d 3:6)

6.) While installing, you will see a Hardware Installation window. Click Continue Anyway to ignore this

warning and continue with the installation (see Figure 10). As installation nears completion, a new window

will prompt you to register your product (see Figure 11). DO NOT SKIP THIS STEP, registration is required

to use the software. Click YES to continue (see Figure 11).

7.) You will use your Product ID to register your product. A Registration Code can be obtained in any of the

following ways:

a. On-line: Receive your Registration Code via E-mail.

b. Phone: Contact Sawgrass Technologies, Inc directly. (888) 253-1679

c. Fax: Send in a form and receive a phone call with your Code. (843) 849-3847

Note: You must have a separate Registration Code for every machine on which the“PowerDriver-R”is installed.

8.) The following instructions will show how to register On-line. Start by selecting Click Here to Obtain

Registration Code (see Figure 12). The Product Registration Web Page will appear (see Figure 13).

Complete the requested information on the form and click Submit (see Figure 13).

FIGURE 10

FIGURE 11

FIGURE 13FIGURE 12

SubliJet-R: Ricoh GX e3300N PowerDriver-R Installation (cont’d 4:6)

9.) Type in the Registration Code you receive and click Apply Code (see Figure 14). Next, click OK

to complete the registration process (see Figure 15). The installation program warns you to disable

the color management in your graphics software. Click Continue to proceed (see Figure 16).

10.) When installation has completed, you will receive the following window prompting you to reboot your

computer and initialize PowerDriver R upon restart. Click Yes to reboot your computer (see Figure 17).

FIGURE 14

FIGURE 15

FIGURE 16

FIGURE 17

PAGE 4 of 6 >>

Andere Handbücher für Aficio GX e3300N

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh MP CW2200SP Bedienungsanleitung

Ricoh

Ricoh Pro L5130 Bedienungsanleitung

Ricoh

Ricoh Aficio SP C730DN Bedienungsanleitung

Ricoh

Ricoh SG Series Gebrauchs- und Pflegehandbuch

Ricoh

Ricoh AFICIO2090 - Aficio 2090 B/W Laser Gebrauchsanweisung

Ricoh

Ricoh IM C300 Bedienungsanleitung

Ricoh

Ricoh Ri 1000X Bedienungsanleitung

Ricoh

Ricoh Pro C5200s Bedienungsanleitung

Ricoh

Ricoh SP 220NW Bedienungsanleitung

Ricoh

Ricoh SP 112SF Bedienungsanleitung

Ricoh

Ricoh CLP340D Bedienerhandbuch

Ricoh

Ricoh GX7000 SubliJet R Bedienungsanleitung

Ricoh

Ricoh Aficio SP C231SF Bedienungsanleitung

Ricoh

Ricoh Aficio SP 5200DN Betriebsanleitung

Ricoh

Ricoh AP1400 Bedienungsanleitung

Ricoh

Ricoh Priport JP5000 Bedienungsanleitung

Ricoh

Ricoh MT-P2 Bedienungsanleitung

Ricoh

Ricoh Ri 2000 Bedienungsanleitung

Ricoh

Ricoh SP C435DN Bedienungsanleitung

Ricoh

Ricoh CL7000 - Aficio D Color Laser Printer Bedienungsanleitung

Ricoh

Ricoh PRIPORT SILVER Service-Handbuch

Ricoh

Ricoh Aficio MP W3600 Montage- und Wartungsanleitung

Ricoh

Ricoh Pro C5200s Betriebsanleitung

Ricoh

Ricoh SP C240 Series Montageanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung