Ricoh C125 P Bedienungsanleitung

Setup Guide

Setting Up the Machine

Conﬁguring the Network Setting

Control Panel Sheet

Installing the Printer Driver

1. Setting Up the Machine

50 15

89.6

ECB011

70 cm

(27.6 inches)

20 cm

(7.9 inches)

33 cm

(13 inches)

20 cm

(7.9 inches)

10 cm

(4.0 inches)

ECB001

120 - 127 V, 60 Hz, 11 A or more

Power Source

Do not install or use this device in any area that does not have adequate ventilation as shown.

Check the supplied items. For information on the supplied items, see the User's Guide on the website.

ECB012

ECB078

ECB065

ECB066

ECB020

ECC023

ECC042

ECC024

ECB021

ECB022

ECB024

ECC029

ECC030

ECC031

ECC032

ECB025

ECB026

ECB027

ECB028

ECB030

ECB031

ECB032

ECB231

German

French

English

201

Language

Password

Apply the following func.

Setup initial password

Admin. Tools Lock.

M0ESIC0006

Password

Administrator Password

FTP Password

M0ESIC0007

Password

(8 chars)

Please Setup Password

M0ENIC0010

Input Menu

M0ENIC0003

Password

(8 chars)

Please Setup Password

M0ENIC0011

Password

(8 chars)

Please Conf. Password

M0ENIC0012

Input Menu

M0ENIC0003

Configure the network setting.

Go to page 5 "2. Configuring the Network Setting".

2. Configuring the Network Setting

Check How the Computer Is Connected

Specify how to connect to your computer according to the communication environment of your system.

M0ENIC0007

Connect by Wi-Fi Setup WizardConnect by the PIN code

Can you identify the PIN code

of the router (access point)

to which you want to connect?

Connect by the WPS button

Connect via Wi-Fi Direct

See Wi-Fi Direct Guide in our website

Does the access point have

a WPS button?

Use a router (access point)?Connect using an

Ethernet cable

Connect using a

USB cable

Which method do you want to use (wireless or wired)?

Wired

Wireless

Yes

Go to page 8 "Easy Setup Using a PIN Code".

Go to page 10 "Connecting the Machine via USB or

Ethernet".

Go to page 7 "Easy Setup Using the WPS Button".

Go to page 6 "Easy Setup Using the Wi-Fi Setup Wizard".

• To connect using the WPS button, go to page 7 “Easy Setup Using the WPS Button”.

• To connect using a PIN code, go to page 8 “Easy Setup Using a PIN Code”.

• To set up manually, see the User's Guide in our website.

• When the Wi-Fi Direct function is enabled, a Wi-Fi Direct compliant device is recognized as a router (access point), and direct

communication among Wi-Fi Direct-compliant devices becomes possible.

When communicating using the Wi-Fi Direct function, you cannot connect to the Internet at the same time.

Connecting the Machine via Wi-Fi

DUE079

Easy Setup Using the Wi-Fi Setup Wizard

From the control panel of this machine, you can also configure the

wireless LAN settings for the machine.

●The following item is necessary to set up a wireless

connection.

●Router (access point)

Checking the SSID and Encryption key

The SSID and Encryption key for the router (access point) may be

printed on a label affixed to the router (access point). For details about

the SSID and Encryption key, refer to the router (access point) manual.

SSID

Encryption key

:XXXXXXXXXXXXX

DSG099

Confirm the SSID and Encryption key, and write them down on the

blank space as shown below.

SSID:

Encryption key:

Configuring Settings Using the Control Panel

●Make sure the Ethernet cable is not connected to the

machine.

1. Check that the router (access point) is working correctly.

2. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and

then the [OK] key.

Network Wizard

Wired (Ethernet)

DYG071

Wireless (Wi-Fi)

Press the [ ] or [ ] key to select SSID of the router (access

point) from the searched SSID list, and then press the [OK] key.

Wi-Fi Setup Wizard 113

Network 2

Network 3

ECB241

Network 1

The next steps differ depending on the authentication method that

you have selected. Proceed to Step 4 of the appropriate section.

• If the authentication method is set to [WPA2-PSK] or [Mix Mode

WPA2/WPA]

• If the authentication method is set to [Open system] or [Shared Key]

• If the authentication method has not been congured, proceed to Step 5

in .

Connecting to devices using the WPA2-PSK or

Mix Mode WPA2/WPA authentication

4. Enter the encryption key using the [ ] or [ ] key, and then

press the [OK] key.

ECB225

WPA2-PSK

(8-63 chars/64 hex)

Key :

Password

As the passphrase, you can enter either 8 to 63 ASCII

characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f).

For details about checking the encryption key, see "Checking the

SSID and Encryption key".

5. Press the [OK] key.

ECB226

(OK/Back)

Are you sure to connect?

6. Check the result.

Connection has succeeded:

DSG355

Connect succeed!

Connection has failed:

DSG356

Connect failed!

7. Press the [ ] or [ ] key to select [Quit Setup], and then the

[OK] key.

8. Configuring the Wi-Fi settings is complete.

To use the printer driver, install the printer driver

according to the procedure on page 11 "3. Installing

the Printer Driver".

Connecting to the devices using the Open

system or Shared Key authentication

4. Enter the encryption key using the [ ] or [ ] key, and then

press the [OK] key.

ECB213

Open system

Key: (5 chars)

Password

For details about checking the encryption key, see "Checking the

SSID and Encryption key".

5. Enter the ID using the [ ] or [ ] key, and then press the

[OK] key.

ECB214

ID: 1 (Enter 1-4)

Password

The ID is used for identifying the encryption key. You can

6. Press the [OK] key.

ECB226

(OK/Back)

Are you sure to connect?

7. Check the result.

Connection has succeeded:

DSG355

Connect succeed!

Connection has failed:

DSG356

Connect failed!

8. Press the [ ] or [ ] key to select [Quit Setup], and then the

[OK] key.

9. Configuring the Wi-Fi settings is complete.

To use the printer driver, install the printer driver

according to the procedure on page 11 "3. Installing

the Printer Driver".

Easy Setup Using the WPS Button

●Make sure the Ethernet cable is not connected to the

machine.

● In Steps 10 to 12, congure each setting within two

minutes.

●The following item is necessary to set up a wireless

connection.

●Router (access point)

1. Check that the router (access point) is working correctly.

2. Press the [ ] or [ ] key to select [Wired (Ethernet)], and

then the [OK] key.

Network Wizard

Wired (Ethernet)

DYG081

Wireless (Wi-Fi)

3. Press the [ ] or [ ] key to select [Quit Setup], and then the

[OK] key.

ECB240

Quit Setup

IPv4 Configuration

IPv6 Configuration

Network Wizard

4. Press the [Menu] key.

5. Press the [ ] or [ ] key to select [Network Settings], and

then press the [OK] key.

ECB206

Print List/Report

Network Settings

Wi-Fi Setup Wizard

Settings

6. Enter the administrator password.

7. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and

then press the [OK] key.

ECB207

IPv4 Configuration

Wireless (Wi-Fi)

Wired (Ethernet)

Network Settings

8. Press the [ ] or [ ] key to select [WPS], and then press the

[OK] key.

ECB215

Current Connection

Input SSID

WPS

Wireless (Wi-Fi)

9. Press the [ ] or [ ] key to select [PBC], and then press the

[OK] key.

WPS Type

PBC

DSG092

10. Press the [ ] or [ ] key to select [Yes], and then press the

[OK] key.

ECB216

NoYes

WPS PBC Connect ?

PBC

11. After "Connecting..." appears, press the WPS button on the

router (access point) within two minutes.

WPS

CHV607

• For details about how to use the WPS button, refer to the manuals for

the router (access point).

12. Check the result.

Connection has succeeded:

ECB227

EXIT

has Succeeded

Connection to AP

PBC

• Press the [OK] key to return to the screen displayed in Step 9,

and then press the [Menu] key to return to the initial screen.

Connection has failed:

ECB228

EXIT

has Failed

Connection to AP

PBC

• Press the [OK] key to return to the screen displayed in Step 9.

Check the conguration for the router (access point), and then

try the connection again.

13. Configuring the Wi-Fi settings is complete.

To use the printer driver, install the printer driver

according to the procedure on page 11 "3. Installing

the Printer Driver".

Easy Setup Using a PIN Code

●Make sure the Ethernet cable is not connected to the

machine.

● In Steps 12 to 15, congure each setting within two

minutes.

●To establish a connection using the PIN code, use a

computer that is connected to the router (access point).

●The following item is necessary to set up a wireless

connection.

●Router (access point)

1. Check that the router (access point) is working correctly.

2. Open the PIN code configuration window (web page) for the

router (access point) on your computer.

3. Press the [ ] or [ ] key to select [Wired (Ethernet)], and

then the [OK] key.

Network Wizard

Wired (Ethernet)

DYG081

Wireless (Wi-Fi)

4. Press the [ ] or [ ] key to select [Quit Setup], and then the

[OK] key.

ECB240

Quit Setup

IPv4 Configuration

IPv6 Configuration

Network Wizard

5. Press the [Menu] key.

6. Press the [ ] or [ ] key to select [Network Settings], and

then press the [OK] key.

ECB206

Print List/Report

Network Settings

Wi-Fi Setup Wizard

Settings

7. Enter the administrator password.

8. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and

then press the [OK] key.

ECB207

IPv4 Configuration

Wireless (Wi-Fi)

Wired (Ethernet)

Network Settings

9. Press the [ ] or [ ] key to select [WPS], and then press the

[OK] key.

ECB215

Current Connection

Input SSID

WPS

Wireless (Wi-Fi)

10. Press the [ ] or [ ] key to select [PIN], and then press the

[OK] key.

WPS Type 22

PBC

DSG096

11. Check the PIN code.

ECB217

AbortConnect

XXXXXXXX

PIN Code:

Write down the PIN code in case you might forget it.

12.

Enter the machine's PIN code (8 digits) on the router (access

point)'s web page (The web page accessed in Step 2).

Inhaltsverzeichnis

Andere Ricoh Drucker Handbücher

Ricoh

Ricoh Acifio MP C3002 Betriebsanleitung

Ricoh

Ricoh Ri 100 Bedienungsanleitung

Ricoh

Ricoh Aficio CL2000 Bedienungsanleitung

Ricoh

Ricoh Aficio AP4510 Handbuch

Ricoh

Ricoh Aficio SP C232DN Kurzanleitung

Ricoh

Ricoh SP 212 SFNw Bedienungsanleitung

Ricoh

Ricoh Aficio MP 301SPF Bedienungsanleitung

Ricoh

Ricoh AP600N Bedienungsanleitung

Ricoh

Ricoh Pro C9500 Handbuch

Ricoh

Ricoh Ri 2000 Bedienungsanleitung

Ricoh

Ricoh MP CW2201 Kurzanleitung

Ricoh

Ricoh SP C240 Series Montageanleitung

Ricoh

Ricoh SAVIN D0AP Bedienungsanleitung

Ricoh

Ricoh GX e7700N Bedienungsanleitung

Ricoh

Ricoh Aficio CL3000 Handbuch

Ricoh

Ricoh Aficio GX7000 Bedienungsanleitung

Ricoh

Ricoh Pro L4130 Bedienungsanleitung

Ricoh

Ricoh Pro C901S Stücklistenhandbuch

Ricoh

Ricoh SP C250DN Bedienungsanleitung

Ricoh

Ricoh M047 Bedienungsanleitung

Ricoh

Ricoh SP C252DN Bedienungsanleitung

Ricoh

Ricoh C2000 Bedienungsanleitung

Ricoh

Ricoh J-P2 Bedienungsanleitung

Ricoh

Ricoh M065 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung