Rigol DS1204B Betriebsanleitung

Programming Guide RIGOL

Publication Number: PGA04105-1110

Oct. 2008

DS1000B Series Digital Oscilloscope

DS1204B/DS1104B/DS1064B

RIGOL

Programming Guide for DS1000B Series

RIGOL products are protected by patent law in and outside of P.R. China.

Information in this publication replaces all previously corresponding material.

RIGOL Technologies, Inc. reserves the right to modify or change part of or all the

specifications and pricing policies at company’s sole decision.

NOTE: RIGOL is registered trademark of RIGOL Technologies, Inc.

RIGOL

Programming Guide for DS1000B Series

Content

Chapter 1 Programming Introduction................................................... 1-1

Communication Ports.................................................................................1-2

Symbol Instruction ....................................................................................1-3

Command Abbreviation..............................................................................1-4

Chapter 2 DS1000B Command Systems ............................................... 2-1

System Commands....................................................................................2-2

Keyboard Commands.................................................................................2-6

Measurement Commands......................................................................... 2-22

Acquire Commands ................................................................................. 2-33

Display Commands.................................................................................. 2-36

Vertical Commands.................................................................................. 2-42

Horizontal Commands.............................................................................. 2-49

Trigger Commands .................................................................................. 2-54

Trigger Control Commands ................................................................ 2-54

Trigger Mode Commands................................................................... 2-60

Math Commands ..................................................................................... 2-77

Waveform Commands.............................................................................. 2-79

Utility Commands .................................................................................... 2-88

Storage Commands ................................................................................. 2-91

Mask Commands..................................................................................... 2-96

Cursor Commands................................................................................. 2-102

Other Commands .................................................................................. 2-109

Chapter 3 Programming Examples........................................................ 3-1

Example 1 The Preparation for Programming...............................................3-2

Example 2 Setting the basic measurement ..................................................3-3

Example 3 Storaging and Setting the File ....................................................3-4

Example 4 Reading the Data of Screen Image .............................................3-6

Command Quick Reference ......................................................................... I

RIGOL

Programming Guide for DS1000B Series

1-1

Chapter 1 Programming Introduction

This book provides guidance to the remote control programming of the DS1000B

series digital oscilloscopes.

It includes the necessary conceptual information, the command structure for the

subsystems and the application cases. Users can carry out the remote control to the

oscilloscope or do the further development according to this manual.

NOTE: The Programming Guide is applicable to the firmware version of the

Oscilloscope above 00.02.04.

RIGOL

Programming Guide for DS1000B Series

1-2

Communication Ports

Computers can communicate with the oscilloscope by sending and receiving messages

over USB and LAN interface. Commands in the form of ASCII character strings are

embedded in your computer to make control easier. The input commands of the host

language are used to read responses from the oscilloscope.

Basic operations that you can do with a computer and an oscilloscope include:

Set up the oscilloscope;

Relational measurements;

Acquire data (waveforms or measurement data) from the oscilloscope.

RIGOL

Programming Guide for DS1000B Series

1-3

Symbol Instruction

1. Command Sperator :

Commands usually begin with a colon (:), in special case, such as IEEE

commands will begin with (*), it represents operations the oscilloscope will take.

Queries are formed by adding a question mark (?) at the end of the commands.

The return values of the queries are mostly expressed in scientific notation.

Forms of commands and inquiries have different programme datum usually. But

some others are not need to input the programme datum.

2. Blank Space □

Blank space is used to separate the instruction from the program data. If the

command does not include any program data, a blank space is not needed.

3. Braces { }

If several options separated by “|” are enclosed via “{ }”, only one element may

be selected. For example, {ON | OFF} indicates that only ON or OFF may be

available, not both.

4. Square Brackets [ ]

Items enclosed in “[ ]”can be chosen or not, it’s optional.

5. Triangle Brackets < >

Items enclosed in “< >”should be replaced by a numerical value or character

string.

RIGOL

Programming Guide for DS1000B Series

1-4

Command Abbreviation

Owing to some of the commands are too long to memory and spell, the commands

system of DS1000B especially setup the Commands Abbreviation in order to reduce

your workload and the difficulty to memory.

The abbreviation rule is all the small letters in the command header are omitted.

For example: :TRIGger:ALTernation:SOURce

Its abbreviation is:

:TRIG:ALT:SOUR

RIGOL

Programming Guide for DS1000B Series

2-1

Chapter 2 DS1000B Command Systems

DS1000B Commands System includes the following command subsystems:

System Commands

Keyboard Commands

Measurement Commands

Acquire Commands

Display Commands

Vertical Commands

Horizontal Commands

Trigger Commands

Math Commands

Waveform Commands

Utility Commands

Storage Commands

Mask Commands

Cursor Commands

Other Commands

RIGOL

Programming Guide for DS1000B Series

2-2

System Commands

System Commands are used for the basic operations of an oscilloscope. They can not

only be used as an individual command but also in conjunction with other commands

to form instructions.

System Commands include:

*IDN?

:RUN

:STOP

:AUTO

:FORCetrig

:Trig%50

*RST

*LRN?

*OPC?

:SINGLE

Andere Handbücher für DS1204B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rigol Prüfgeräte Handbücher

Rigol

Rigol DS1000Z Series Betriebsanleitung

Rigol

Rigol DS2000E Series Bedienungsanleitung

Rigol

Rigol MSO2000A Series Bedienungsanleitung

Rigol

Rigol DL3000 Series Betriebsanleitung

Rigol

Rigol DS1000Z Series Bedienungsanleitung

Rigol

Rigol DS1000Z Series Kurzanleitung

Rigol

Rigol DS1000Z-E Series Bedienungsanleitung

Rigol

Rigol DS1102/4B Bedienungsanleitung

Rigol

Rigol DS1204B Betriebsanleitung

Rigol

Rigol DS70000 Series Bedienungsanleitung

Rigol

Rigol DS6104 Installations- und Betriebshandbuch

Rigol

Rigol MSO5152-E Bedienungsanleitung

Rigol

Rigol DS-5000 Series Bedienungsanleitung

Rigol

Rigol RP1018H Bedienungsanleitung

Rigol

Rigol DS6000 Series Bedienungsanleitung

Rigol

Rigol MSO5000-E Series Bedienungsanleitung

Rigol

Rigol DSO-5200A Bedienungsanleitung

Rigol

Rigol MSO2000A Series Betriebsanleitung

Rigol

Rigol RP5600A Bedienungsanleitung

Rigol

Rigol DS1102E Bedienungsanleitung

Rigol

Rigol HDO1000 Series Bedienungsanleitung

Rigol

Rigol DHO4000 Series Installations- und Betriebshandbuch

Rigol

Rigol RP1003C Bedienungsanleitung

Rigol

Rigol MSO8000A Series Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung