Rikon Power Tools 10-622VS Bedienungsanleitung

22”VARIABLE SPEED

SCROLL SAW

#10-622VS

Operator’s Manual

Record the serial number and date of purchase in your manual for future reference.

The serial number can be found on the specification label on the rear of your machine.

Serial Number: ________________________ Date of purchase: _________________

For technical support or parts questions, email [email protected]

or call toll free at (877) 884-5167.

www.rikontools.com

10-622VSM1

TABLE OF CONTENTS

Specifications ........................................................................................ 2

Safety ............................................................................................... 3 - 7

Key Parts Overview ............................................................................... 8

Attachment Parts ................................................................................... 9

Assembly ......................................................................................... 9, 10

Adjustments .................................................................................. 10 - 13

Operation ...................................................................................... 11 - 13

Maintenance ........................................................................................ 14

Troubleshooting ................................................................................... 15

Parts Diagram ...................................................................................... 16

Parts List ........................................................................................ 17, 18

Notes ................................................................................................... 18

Warranty .............................................................................................. 19

SPECIFICATIONS

Motor Amps, Volts, Hertz .......................................... 1.6A, 120V, 60Hz

Electronic Variable Speed (SPM) ....................................... 550 - 1,550

Pinless Blade Length .......................................................... 5” / 130mm

Maximum Cutting Height ...................................................... 2“ / 50mm

Stroke ................................................................................ 3/4” / 20mm

Throat Depth .................................................................... 22” / 560mm

Table Size (LxW) ...............................25-5/8” x 13-3/4” / 650 x 350mm

Table Tilting ...................................................... 30° Left, 0°, 45° Right

Base to Table Height .................................................. 7-9/16“ / 192mm

Dust Port Diameter (O.D.) ............................................. 1-3/8” / 35mm

Maximum Sound Level (at 0.3m / 11.8“) .................................... <80dB

Overall Size (LxWxH)............ 34"x14-1/8"x16-9/16" / 865x360x420mm

Base Size (approx. LxW) .................. 18-5/8” x 13-1/4” / 475 x 335mm

Net Weight ................................................................................. 68 lbs.

NOTE: The specifications, photographs, drawings and information in this manual represent the

current model when the manual was prepared. Changes and improvements may be made at any time,

with no obligation on the part of Rikon Power Tools, Inc. to modify previously delivered units.

Reasonable care has been taken to ensure that the information in this manual is correct, to provide

you with the guidelines for the proper safety, assembly and operation of this machine.

Read all safety warnings and all instructions. Failure to follow the warnings

and instructions may result in electric shock, fire and/or serious injury.

WORK AREA SAFETY

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

3. Keep children and bystanders away while operating a power tool. Distractions

can cause you to lose control.

ELECTRICAL SAFETY

1. Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body

is earthed or grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

5. When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

6. If operating a power tool in a damp location is unavoidable, use a ground fault

circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of

electric shock.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when operating

a power tool. Do not use a power tool while you are tired or under the influence

of drugs, alcohol or medication. A moment of inattention while operating power

tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye protection. Protective

equipment such as a respiratory mask, non-skid safety shoes and hearing

protection used for appropriate conditions will reduce the risk of personal injury.

3. Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or energizing power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

WARNING

TSAFETY INSTRUCTIONS

5. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and

clothing away from moving parts. Loose clothes, jewelry or long hair can be

caughtin moving parts.

7. If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

1. Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

2. Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the

power tool accidentally.

4. Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits, etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended

could result in a hazardous situation.

8. Use clamps to secure your workpiece to a stable surface. Holding a workpiece

by hand or using your body to support it may lead to loss of control.

9. KEEP GUARDS IN PLACE and in working order.

SERVICE

1. Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

CALIFORNIA PROPOSITION 65 WARNING

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities may contain chemicals, including lead, known to the State

of California to cause cancer, birth defects, or other reproductive harm. Wash

hands after handling. Some examples of these chemicals are:

SAFETY INSTRUCTIONS

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and other masonry products.

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies depending on how often you do this type

of work. To reduce your exposure to these chemicals, work in a well-ventilated

area with approved safety equipment such as dust masks specially designed to

filter out microscopic particles. For more information go to www.P65Warnings.ca.gov

BEFORE OPERATION

1. Check for both proper assembly and proper alignment of moving parts.

2. Understand the proper use of the ON / OFF switch.

3. Know the condition of the scroll saw. If any part is missing, bent, or does not

operate properly, replace the component before attempting to operate the scroll

saw.

4. Determine the type of work you are going to be doing. Properly protect your

body including your eyes, hands, face, and ears.

5. To avoid injury caused by pieces thrown from accessories, use only

recommended accessories designed for this saw. Follow the instructions supplied

with the accessory. The use of improper accessories may cause

risk of injury.

6. To avoid contact with rotating equipment:

- Do not put your fingers in a position where they risk contacting the blade if the

workpiece unexpectedly shifts or your hand unexpectedly slips.

- Do not cut a workpiece too small to be held safely.

- Do not reach under the scroll saw table when the motor is running.

- Do not wear loose clothing or jewelry. Roll long sleeves above the elbow. Tie

back long hair.

7. To avoid injury from accidental startups of the scroll saw:

- Make sure to turn OFF the switch and unplug the power cord from the electric

outlet before changing the blade, performing maintenance or making adjustments.

- Make sure the switch is OFF before plugging in the power cord to an electric outlet.

8. To avoid injury from a fire hazard, do not operate the scroll saw near flammable

liquids, vapors or gases.

9. To avoid back injury:

- Obtain help when raising the scroll saw more than 10 inches (25.4 cm). Bend

your knees when lifting the scroll saw.

- Carry the scroll saw by its base. Do not move the scroll saw by pulling on the

power cord. Pulling on the power cord could cause damage to the insulation or

the wire connections resulting in electric shock or fire.

SCROLL SAW SAFETY

1. To avoid injury from unexpected saw movement:

- Use the scroll saw on a firm level surface with adequate space for handling

and supporting the workpiece.

- Be sure the scroll saw cannot move when operated. Secure the scroll saw to a

workbench or table with wood screws or bolts, washers and nuts.

SAFETY INSTRUCTIONS

CONTINUED ON PAGE 6

2. Before moving the scroll saw, unplug the power cord from the electrical outlet.

3. To avoid injury from kickback:

- Hold the workpiece firmly against the tabletop.

- Do not feed the workpiece too fast while cutting. Only feed the workpiece at

the rate the saw will cut.

- Install the blade with the teeth pointing downward.

- Do not start the saw with the workpiece pressing against the blade. Slowly feed

the workpiece into the moving blade.

- Use caution when cutting round or irregularly shaped workpieces. Round items

will roll and irregularly shaped workpieces can pinch the blade.

4. To avoid injury when operating the scroll saw:

- Obtain advice from a qualified person if you’re not thoroughly familiar with the

operation of scroll saws.

- Before starting the saw, make sure the blade tension is correct. Recheck and

adjust tension as needed.

- Make sure the table is locked into position before starting the saw.

- Do not use dull or bent blades.

- When cutting a large workpiece, make sure the material is supported at the

table height.

- Turn the saw OFF and unplug the power cord if the blade jams in the workpiece.

This condition is usually caused by sawdust clogging the line you are cutting.

Wedge open the workpiece and back out the blade after turning off and unplugging

the machine.

GROUNDING INSTRUCTIONS

In the event of a malfunction or breakdown, grounding provides the path of least

resistance for an electric current and reduces the risk of electric shock. This tool

is equipped with an electric cord that has an equipment grounding conductor and

a grounding plug. The plug MUST be plugged into a matching outlet that is properly

installed and grounded in accordance with ALL local codes and ordinances.

1. Do not modify the plug provided. If it will not fit the outlet, have the proper outlet

installed by a licensed electrician.

2. Improper connection of the equipment grounding conductor can result in electric

shock. The conductor with the green insulation (with or without yellow stripes) is the

equipment grounding conductor. If repair or replacement of the electric cord or plug is

necessary, DO NOT connect the equipment grounding conductorto a live terminal.

3. Check with a licensed electrician or service personnel if you do not completely

understand the grounding instructions or whether the tool is properly grounded.

4. Use only three-wire extension cords that have three-pronged plugs and outlets

that accept the tool’s plug. Repair or replace a damaged or worn cord immediately.

CAUTION! In all cases, make certain the outlet in question is properly grounded. If

you are not sure, have a licensed electrician check the outlet.

SAFETY INSTRUCTIONS

SCROLL SAW SAFETY - CONTINUED FROM PAGE 5

GUIDELINES AND RECOMMENDATIONS FOR

EXTENSION CORDS

When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. An

undersized cord will cause a drop in line voltage resulting

in loss of power and overheating. The table below shows

the correct size to be used according to cord length and

ampere rating. When in doubt, use a heavier cord. The

smaller the gauge number, the heavier the cord.

NOTE: Canadian electrical codes require extension cords to be certified SJT type or better.

1. Examine extension cord before use. Make sure your extension cord is properly

wired and in good condition. Always replace a damaged extension cord or have it

repaired by a qualified person before using it.

2. Do not abuse extension cord. Do not pull on cord to disconnect from receptacle;

always disconnect by pulling on plug. Disconnect the extension cord from the receptacle

before disconnecting the product from the extension cord. Protect your extension cords

from sharp objects, excessive heat and damp/wet areas.

3. Use a separate electrical circuit for your tool. This circuit must not be less than a

12-gauge wire and should be protected with a 15A time-delayed fuse. Before connecting

the motor to the power line, make sure the switch is in the OFF position and the electric

current is rated the same as the current stamped on the motor nameplate. Running at a

lower voltage will damage the motor.

AMPERAGE

REQUIRED GAUGE FOR EXTENSION CORDS

25 ft. 50 ft. 100 ft. 150 ft.

0 TO 6 Amps 18 gauge 16 gauge 16 gauge 14 gauge

SAFETY INSTRUCTIONS

This tool is intended for use on a circuit that has an electrical receptacle as shown in

FIGURE A. It shows a 3-wire electrical plug and electrical receptacle that has a grounding

conductor. If a properly grounded electrical receptacle is not available, an adapter as

shown in FIGURE B can be used to temporarily connect this plug to a 2-contact unground-

ed receptacle. The adapter has a rigid lug extending from it that MUST be connected to a

permanent earth ground, such as a properly grounded receptacle box. THIS ADAPTER IS

PROHIBITED IN CANADA.

FIG. A FIG. B

KEY PARTS DIAGRAM

No. Description Qty.

1 Blade tension knob 1

2 Power switch 1

3 Variable speed control knob 1

4 1

Sawdust blower

6 1

Blade tension handle

Blade guard

Work table

Tablelevel knob

Tool box

Motor

Pull ring pin

18 TPI Pinless Blade

Tablelevel lock handle

9 1

Blade lock knob

KEY PARTS OVERVIEW

910 11

No. Description Qty.

Dust hood 1

Phillips screw M4X12 2

90° Dust hose fitting 1

2Hex Wrenches (S3, S4)

15 TPI Pinless Blade

123

ATTACHMENT PARTS

See pages 16 to 18 for the Parts Diagram and Parts List.

ASSEMBLY

UNPACKING AND CLEAN-UP

1. Report any shipping damage immediately to your local distributor. Take

photographs for any possible insurance claims.

2. Carefully remove all contents from the shipping carton. Compare the contents with the list

of contents to make sure that all of the items are accounted for, before discarding any

packing material. Place parts on a protected surface for easy identification and assembly.

If any parts are missing or broken, please call RIKON Customer Service (877- 884-5167)

as soon as possible for replacements. DO NOT turn your machine ON if any of these items

are missing. You may cause injury to yourself or damage to the machine.

3. Clean all rust protected surfaces with ordinary house-hold type grease / spot remover or

mild solvent. Do not use; gasoline, paint thinner, mineral spirits, etc. These may damage

painted surfaces. Wipe all parts thoroughly with a clean dry cloth.

4. Set packing material and shipping carton aside. Do not discard until the machine

has been set up and is running properly. Dispose of the packing in an environment-

ally friendly manner.

The model # 10-622VS 22” Scroll Saw is shipped complete in one box.

WARNING

ALIGN THE BEVEL INDICATOR

DUST COVER INSTALLATION

The bevel indicator has been adjusted at the factory, but should be rechecked prior to

use for best operation.

1. Secure the dust hood to the machine by

threading the Phillips screws (Fig. 1, 1) through

the holes in the hinge.

2. Tighten the locking knob (2).

Note: This machine is equipped with a 90°

elbow for easy dust hose fitting. See page 9.

TO REDUCE RISK OF INJURY:

• When carrying the saw, hold it close to your body to avoid injury to your back. Bend

your knees when lifting the saw.

• Carry the saw by the base, table or housing. DO NOT carry the saw by the upper arm,

motor or power cord.

• Secure the saw in a position where people cannot stand, sit, or walk behind it. Debris

thrown from the saw could injure people standing, sitting, or walking behind it.

Securethe saw on a firm, level surface where the saw cannot rock. Make sure there

is adequate room for handling and properly supporting the workpiece.

1. Loosen the blade guard knob (Fig. 2, 1) and move the blade guard (2) all the way up.

2. Check if the pointer is on the 0 scale. If not, first Loosen the table level lock handle

(Fig. 3, 3) and turn the table level knob (4) to bevel the table until it is approximately at a

right angle to the blade.

ASSEMBLY & ADJUSTMENTS

This machine is designed to operate in closed rooms and must be placed stable on a firm

and level surface. For safe operation of the scroll saw, the machine should be secured to

a solid work surface, bench or stand.

• A workbench made from solid wood is better than one made of plywood, as interfering

vibrations and noise are more noticeable with plywood.

THE MACHINE MUST NOT BE PLUGGED IN AND THE POWER SWITCH

MUST BE IN THE 'OFF' POSITION UNTIL ASSEMBLY IS COMPLETE.

WARNING

FIGURE 1

Inhaltsverzeichnis

Andere Rikon Power Tools Gesehen Handbücher

Rikon Power Tools

Rikon Power Tools 10-300 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 11-600S Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-336 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-308 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-305 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-326 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-347 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-324 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 11-200 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-3061 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 18" Professional Bandsaw Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-345 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-110 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-342EVS Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-321 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-600VS Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-325 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-350 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-110B Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-341 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 15-400 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-370 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-325 Bedienungsanleitung

Rikon Power Tools

Rikon Power Tools 10-351 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung