Risco RisControl Bedienungsanleitung
RisControl
Quick Installation Guide
Model: RP432KPTZ
2
Introduction
The RisControl can be used in 3 operation modes, as follows:
•Smart Home + Security –For Security, RisControl is connected to a
control panel via the RS-485 bus. For Smart Home operation,
RisControl is connected to RISCO Cloud via Wi-Fi. If there are
additional RisControl units, a Master / Slave configuration should be
defined.
•Smart Home Only–RisControl is connected to the RISCO Cloud via
Wi-Fi (no BUS connection to the RISCO control panel). In addition,
if there are more RisControl units in the installtion, a Master / Slave
configuration should be defined.
•Security Only- RisControl is connected to a control panel via the
RS-485 bus and to the RISCO Cloud via Wi-Fi
3
RisControl Mounting
Smart Home Standalone:
Step 1
4
Step 2
* 5Vdc/2A Power Supply to USB-C (P/N RP432PSR00A)
*
5
Step 3
6
Step 4
7
Installation using Power Supply:
*
* 100-240VAC Adaptor to 14.4VDC/3A (P/N RP432PS00SAA)
8
When Connected to Control Panel:
Step 1
9
Step 2
Wall Installation
OR
10
3 Gang Flush Mounting Box
Andere Handbücher für RisControl
3
Dieses Handbuch passt für folgende Modelle
1
Andere Risco Bedienfeld Handbücher
Risco
Risco GT Plus Gebrauchsanweisung
Risco
Risco RisControl Bedienungsanleitung
Risco
Risco GardTec 350+ Bedienungsanleitung
Risco
Risco GT 600 Bedienungsanleitung
Risco
Risco GT 600 Programmierhandbuch
Risco
Risco RisControl Bedienungsanleitung
Risco
Risco gt490x Bedienungsanleitung
Risco
Risco GardTec 350+ Bedienungsanleitung
Risco
Risco LightSYS Gebrauchsanweisung
Risco
Risco ProSYS 128 Bedienungsanleitung
