Risco Agility3 Gebrauchsanweisung
1
Quick User Guide
Thank you for choosing the Agility 3 Wireless Security System. This quick start guide describes
the main user operating actions of the Agility 3. To view the full version of the user manual
please refer to our website www.riscogroup.com.
Away (Full) Arming:
Quick mode: Press .
Quick mode: Press .
High security mode:
Press + code or proximity tag.
High security mode:
Press + code.
Keyfob: Pressbutton.
Send SMS: Enter [Code][A]
(example 1234A).
Web Application:
Click Full Arm.
Smartphone :
Press .
Stay (Home) Arming:
Quick mode: Press .
Quick mode: Press .
High security mode:
Press + code or proximity tag.
High security mode:
Press + code.
Keyfob: Press button or button 4
(if installer defined).
Send SMS: Enter [Code][H]
(example 1234H).
Web Application:
Click art Arm.
Smartphone:
Press .
Partition Arming:
Quick mode:
Press / / > / .
Quick mode:
Press / / > / .
High security mode:
Press / / > /
+ code or proximity tag.
High security mode:
Press / / > /
+ code.
Press button or button 4
(if installer defined).
Send SMS: Enter [Code]
[A or H] [Partition 1 2 or 3].
View Last Alarm: Hold button for two seconds.
View System Status: Short/long press on : LCD display.
2
System Disarming:
Press followed by code or
proximity tag.
Quick mode: Press .
High security mode:
Press > Code.
Press the button.
Send SMS: Enter [Code][D]
(example 1234D).
Web Application:
Enter user code and click Disarm.
Smartphone:
Press .
Partition Disarming:
Press / / > > code or
proximity tag.
Quick mode:
Press / / > .
High security mode:
Press / / > > code.
Press the button. All partitions
assigned to the button will be
disarmed.
Send SMS: Enter [Code][D]
[Partition 1 2 or 3]
(example 1234D1).
Duress Disarming: Press followed by duress code.
Quick Zones ypass Press > [Code] [Zone No.] [Define] .
Panic Alarm:
Press both and keys
simultaneously .
Press both and keys
simultaneously.
Press the small blank button (if
installer defined).
Fire Alarm: Press simultaneously for 2 seconds.
Emergency/Medical Alarm: Press simultaneously for 2 seconds.
Define Follow-Me: Press > [Code] [Follow Me] [Define] .
System Chime On/Off: Press the button for 2 seconds.
Output Control Press button / / for 2 seconds.
3
LED Indicators:
ower LED (Green)
On: Power OK.
Rapid Flash: AC trouble.
Slow Flash: Low battery
trouble.
Trouble LED (Orange)
Rapid Flash: Trouble.
Off: No trouble.
Arm/Alarm LED (Red)
On: System armed.
Rapid Flash: Alarm.
Slow Flash: System in Exit
Delay.
Stay LED (Red)
On: System armed at STAY.
Off: System disarmed.
Ready LED (Green)
On: System ready.
Off: Open zones.
Slow Flash: Ready to arm
with open entry/exit zone.
Sound Indicators:
Intrusion alarm:
Fire alarm:
Exit delay:
Entry delay:
Confirm operation:
Reject operation:
Arm/Disarm squawk:
Continues rapid beeping.
Staggered rapid beeping.
Slow buzzer beeps until the Exit Delay time period expires.
Slow buzzer beeps until the Entry Delay time period expires.
A one-second tone.
Three rapid error beeps.
1 siren chirp: System armed
2 siren chirps: System is disarmed
4 siren chirps: System disarmed after an alarm.
Edit User Codes:
1.Press and enter your code.
2. Scroll to the option Codes/Tags and press .
3.Scroll to User Codes/Tags and press .
4.Select the option New/Change and press .
5. Scroll to select the User Index number to which you want to assign a user code and press.
6. Enter and re-enter the new code followed by .
7. Repeat the above steps for additional codes.
Assign Proximity Tag:
1. Follow steps 1-3 of the Edit User Code above.
2. Scroll to Proximity Tags and press .
3. Select the option New/Change and press .
4. Scroll to the User Index number to which you want to assign a tag and press .
5. Within 10 seconds hold the proximity tag at a distance of 1 to 2 cm from the keypad’s keys.
6. Repeat the above steps for additional codes.
4
SMS Control Commands (not available during Cloud mode)
Full Arm: [Code][A] (example 1234A)
Home Arm: [Code][H] (example 1234H)
Full Disarm: [Code][D] (example 1234D)
artition Arm: [Code][A][Partition No.]
artition Disarm: [Code][D][Partition No.]
Bypass Zone: [Code][B][Zone No.]
Un-bypass Zone: [Code][UB][Zone No.]
Activate Output: [Code][UOON][UO No]
Deactivate Output: [Code][UOOFF][UO No]
Get system status: [Code][ST]
Get last alarm memory: [Code][AL]
Get SIM credit level: [Code][CR]
Telephone Control Commands (not available during Cloud mode)
Receiving a call:
1. Pick up the phone.
2. Say “Hello” or press [#]. You
will hear an event announcement
message.
3. Acknowledge the event (See
Acknowledgment menu).
Acknowledgment menu:
Acknowledge message: Press [1]
Acknowledge and stop all dialing: Press [2] [User code] [#]
Access Operations menu: Press [3] [User code] [#]
Listen and Talk: Press [6] [User code]
Repeat the event message: Press [#]
Repeat the Acknowledgment menu: Press [*]
Register to RISCO Cloud
Registering to RISCO Cloud enables you to monitor control and configure your Agility 3 system
from any location.
1. Go to www.riscocloud.com/register.
2. Fill in your first name and last name.
3. Enter your email address as Login Name (required for 1st time activation).
4. Define password (minimum of 6 characters and at least one digit) and confirm.
5. Enter in the 15 digits Panel ID as it appear on the sticker located on the side of the panel or as
printed on the postcard that arrived with the panel.
6. Complete registration form and press the Register Button.
7. To complete registration open the email message received on the email account you defined as
Login Name.
Login to RISCO Cloud
1. Go to www.riscocloud.com.
2. Enter User Name and Password (same as supplied during the registration process).
3. Enter Passcode (Agility User Code).
4. Click the Enter button.
iRISCO – RISCO’s Smartphone Application
Homeowners can now enjoy the iRISCO Smartphone app for smart and easy control of their Agility
3 system from any location.
Download the iRISCO app from the Apple App store or Android Play Store.
© RISCO Group 08/2012 5IN1868
Inhaltsverzeichnis
Andere Risco Sicherheitssystem Handbücher
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco WisDom Montageanleitung
Risco
Risco LightSYS Bedienungsanleitung
Risco
Risco LightSYS Benutzerhandbuch
Risco
Risco Agility 4 Gebrauchsanweisung
Risco
Risco ProSYS Betriebsanleitung
Risco
Risco LSC AGILITY 4 Bedienungsanleitung
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco Agility Bedienungsanleitung
Risco
Risco Agility 3 Benutzerhandbuch
Risco
Risco Agility Bedienungsanleitung
Risco
Risco WiComm Bedienungsanleitung
Risco
Risco Agility Bedienungsanleitung
Risco
Risco ProSYS Plus Montageanleitung
Risco
Risco Agility 3 Bedienungsanleitung
Risco
Risco SecuSafe EL4855PI Bedienungsanleitung
Risco
Risco WiComm Pro Bedienungsanleitung
Risco
Risco WisDom Bedienungsanleitung
Risco
Risco Agility 4 Gebrauchsanweisung
Beliebte Sicherheitssystem Handbücher anderer Marken
EDM
EDM Solution 6+6 Wireless-AE Bedienungsanleitung
Highway Safety Group
Highway Safety Group EA401 Bedienungsanleitung
Siren
Siren LED GSM Bedienungsanleitung
Detection Systems
Detection Systems 7090i Montageanleitung
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung
Siemens
Siemens FDM273 Bedienungsanleitung