Risco ProSYS Plus Gebrauchsanweisung

ProSYS Plus

Quick User Guide

Full (“Away”) Arming

❖Quick mode:

❖High Security mode: Code ➢

❖Quick mode: .

❖High security mode:

➢code or use Proximity

tag

❖Quick mode:

❖High Security mode: Code ➢

to apply to all partitions,

or slide a specific partition to

the right under .

Full Arm all: Security ➢

Press

❖Quick mode: .

❖High Security mode: ➢code

Press

Partial (“Stay”) Arming

❖Quick mode:

❖High Security mode: Code ➢

❖Quick mode: .

❖High security mode:

➢code or use Proximity

tag

❖Quick mode:

❖High Security mode: Code ➢

to apply to all partitions,

or slide a specific partition to

the left under .

Partial Arm all: Security ➢press

Press

❖Quick mode: .

❖High Security mode: ➢code

Press or large rounded

button (installer-defined)

08/2020

Page 2

5IN2370 C

Partition & Group Arming

❖Full partition arming:

Code ➢“Security” menu ➢“Partitions” tab ➢select All or specific partition

number/s ➢

❖Partial partition arming:

Code ➢“Security” menu ➢“Partitions” tab ➢select All or specific partition

number/s ➢

Group Arming: “Groups” tab ➢press group letter

❖Full partition arming:

Code ➢➢select All or specific partition number/s ➢

❖Partial partition arming:

Code ➢➢select All or specific partition number/s ➢

Group Arming: Press group letter

Note: Supports up to 3 partitions. Does not support Group arming.

❖Full partition arming:

•Quick mode: Partition number ➢

•High Security mode: Partition number ➢➢code or use Proximity tag

❖Partial partition arming:

•Quick mode: Partition number ➢

•High Security mode: Partition number ➢➢code or use Proximity tag

08/2020

Page 3

5IN2370 C

System Disarming

Code ➢“Security” menu ➢

➢code or use Proximity

tag

Code ➢

to disarm all partitions, or

slide a specific partition to the

center under ➢enter code

Disarm all: Security ➢➢code ➢

press Disarm

Press

❖Quick mode: .

❖High security mode: ➢code

Disarm all: Press

Partition & Group Disarming

Code ➢“Security” menu ➢“Partitions” tab ➢select the Partitions to Disarm

➢

Partition disarming: Code ➢➢select

All or specific partition number(s)

Group disarming:

Partition disarming:

Partition number ➢

➢code

Duress Disarming

Duress code ➢

Note: Panel is silent (no alarm siren)

➢duress code

Note: Panel is silent

(no alarm siren)

08/2020

Page 4

5IN2370 C

Bypassing & Un-bypassing Zones

Code ➢“Security” menu ➢“Detectors” tab ➢select a detector (zone) ➢

slide switch to the right to bypass

➢code, ➢scroll to Activities menu, ➢Bypass, ➢Zones,

➢scroll to select a bypass option, .

Viewing System Troubles

Code ➢from the Top Bar, press to view troubles

➢code, ➢scroll to View menu, ➢Trouble , ➢scroll to view

troubles

Viewing Last Alarm / Event Log

Code ➢“History” menu ➢press “All” to view all events, or search an event

Note: You can filter the search according to specific types of events:

All / Alarms / Troubles / Smart Home / Media Events

➢code, ➢scroll to Event Log, ➢scroll to view events

Viewing System Status

for 2 seconds

❖Quick mode:

for 2 seconds

❖High Security mode:

for 2 seconds ➢

code or use

Proximity tag

Press

❖Quick mode: for 2 seconds

❖High Security mode: for 2 seconds ➢code

08/2020

Page 5

5IN2370 C

Activating Output

Code ➢

“Security” menu

➢

“Utiltiy Output”

tab ➢select

relevant Utility

Output button,

√

➢code,

➢scroll to

Activities menu,

➢enter

Utility Output

number, .

Note: Must be

installer-defined

❖Quick mode: Press

button (1—3) for 2

seconds

❖High security

mode: Press button

(1—3) for 2 seconds

➢code or use

Proximity tag.

Note: Must be

installer-defined

❖Quick mode: Press button (1—3) for 2 seconds

❖High security mode: Press button (1—3) for 2 seconds ➢enter code.

Note: Must be installer-defined

08/2020

Page 6

5IN2370 C

Activating a Panic Alarm

Press the Emergency button (located at the top of the Lock Screen or at the

end of the main menu) ➢➢press and together for 2 seconds.

Press and together for at least 2

seconds.

Press and

together for 2 seconds

Press and simultaneously

Press and together for 2 seconds.

Activating a Fire Alarm

Press the Emergency button (located at the top of the Lock Screen or at the

end of the main menu) ➢➢press and together for 2 seconds.

Press and together for at least 2 seconds.

Press +

together for 2 seconds

Activating an Auxiliary Emergency Alarm

Press the Emergency button (located at the top of the Lock Screen or at the

end of the main menu) ➢➢press and together for 2 seconds.

Press and together for at least 2 seconds.

Press +

together for 2 seconds

08/2020

Page 7

5IN2370 C

SMS Commands

NOTES: Command words are not case sensitive. A separator between command words

may be used (or not). To receive an acknowledgement reply, add RP to the end of an SMS

command.

Full Arm: code + A (Example: 1234A)

Get system status: code + ST

Home Arm: code + H

Bypass Zone: code + B + zone number

Group Arm: code + G + select group A--D

Un-bypass Zone: code + UB + zone

number

Full Disarm: code + D

View last alarm : code + AL

Partition Full Arm: code + A: + partition number

Change FM number: code +

FMPHONE +

FM serial number + NEW + new

phone number

Partition Home Arm: code + H: + partition number

Activate Output: code + UOON + UO

number

Deactivate Output: code + UOOFF +

UO number

Multiple Partition Full/Home Arm: code + A/

H: + partition number A, + partition number B, +

partition number C, etc.

Get SIM credit level: code + CR

Partition Disarm: code + D: + partition number

Get SIM credit level: code + CR

Multiple Partition Disarm: code + D: + partition

number A, + partition number B, + partition

number C, etc.

LED Indicators –Elegant Keypad

Power LED

On: Power OK.

Off: No power

Rapid flash: System trouble.

Slow flash: System is

programming

Ready LED

On: Ready to arm

Off: Not ready to arm

Slow flash: Ready to arm

while entry/exit zone is

open

Arm LED

On: System in fully armed

mode

Off: System disarmed

Rapid flash: Alarm

Slow flash: System in Exit

Delay

Partial Arm / Bypass

LED

On: System in partially-

armed or zone-bypassed

mode

Off: No bypassed zones

Tamper LED

On: Tamper alarm

Off: No tamper alarm

Fire LED:

On: Fire alarm

Off: No fire alarm

Flash: Fire circuit trouble

08/2020

Page 8

5IN2370 C

LED Indicators –2-Way Remote

Control

Defining User Codes –Elegant

Keypad

Operation

Send

command*

Receive

Status

Full Arm

Green

Red

Partial

Arm

Green

Orange

Disarm

Green

Alarm

Green

Flashing LED

* If the LED changes to orange, it indicates

a low battery condition.

1. ➢Grand master code (default = 1234)

2. to scroll to Codes/Tags ➢press

twice.

3. to scroll to the user (index number)

for defining ➢press twice.

4. Enter (or re-enter) a 4—6 digit code, ;

the system beeps and ACCEPTED

displays

Registering to the RISCO Cloud

1After the RISCO Cloud has been enabled by your system installer, go to

www.riscocloud.com

2Fill in your first and last name.

3Enter your e-mail address as the Login Name (required for 1st-time activation).

4Define password (minimum of 6 characters and at least one digit), and then confirm.

5Enter the 15 digits Panel ID as it appears as printed on the postcard packaged with the

main panel. You can also view it on the keypad (see the ProSYS Plus User Manual).

6Complete registration form, and then press Register.

7Open the e-mail received at the email account you had defined as the Login Name in

step 3, and then click the link to activate your registration to the Cloud.

Logging in to the RISCO Cloud / Accessing the Web User Application

1Go to www.riscocloud.com

2Enter your user name and password (as defined during the registration process).

3Enter the system PIN code (user code).

4Click Enter.

iRISCO Smartphone App

Download the iRISCO Smartphone app from the Apple App store or the Android Play

Store.

For additional information see the ProSYS Plus User Manual, available on our website:

www.riscogroup.com

Andere Handbücher für ProSYS Plus

Inhaltsverzeichnis

Andere Risco Sicherheitssystem Handbücher

Risco

Risco lightsys 2 Bedienungsanleitung

Risco

Risco WiComm Bedienungsanleitung

Risco

Risco Agility Bedienungsanleitung

Risco

Risco Agility3 Gebrauchsanweisung

Risco

Risco Agility 3 Bedienungsanleitung

Risco

Risco SecuSafe EL4855PI Bedienungsanleitung

Risco

Risco ProSYS Plus Montageanleitung

Risco

Risco WiComm Pro Gebrauchsanweisung

Risco

Risco ProSYS Plus Gebrauchsanweisung

Risco

Risco Agility Bedienungsanleitung

Risco

Risco LightSYS Bedienungsanleitung

Risco

Risco Agility Bedienungsanleitung

Risco

Risco lightsys 2 Gebrauchsanweisung

Risco

Risco Agility 3 Benutzerhandbuch

Risco

Risco LightSYS Bedienungsanleitung

Risco

Risco LIGHT SYS 2 Gebrauchsanweisung

Risco

Risco LSC AGILITY 4 Bedienungsanleitung

Risco

Risco Lights Plus Gebrauchsanweisung

Risco

Risco WisDom Montageanleitung

Risco

Risco LightSYS Bedienungsanleitung

Risco

Risco lightsys 2 Bedienungsanleitung

Risco

Risco LightSYS Montageanleitung

Risco

Risco Agility 3 Bedienungsanleitung

Risco

Risco Agility 4 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung