5. Three Step Use Directions
Connector inside adapter, generally female
1. Remove Guide Cap from the device.
Connector plugs alone, usually male type
1. Open the Cover on the Guide Cap.
2. Insert tip of cleaner into SC Adapter.
2. Insert SC connector into the Guide Cap.
3. Push the Outer Shell to start cleaning the SC
connector end face. A “click”sound indicates
end of cleaning process. Close the cover after
use.
Be careful not to slant the RB-PEN25 while
inserting it into the optical adapter.
Do not overly exert force during insertion as
this may cause damage to both connector and
the RB-PEN25 cleaning pen.
If no click is heard, remove pen from adapter
and check there is no sizable debris preventing
the cleaning process.
3. Push the Outer Shell to start cleaning the SC
connector end face. A “click”sound indicates
end of cleaning process. Close the cover after
use.
Be careful not to slant optical connector while
inserting it into the Guide Cap.
Do not overly exert force during insertion as
this may cause damage to both connector and
the RB-PEN25 cleaning pen.
If no click is heard, remove optical connector
from pen and make sure there is no sizable
debris preventing the cleaning process.
