ROBOTIQ HAND-E Bedienungsanleitung

1.WHAT IS SUPPLIED?

Standard upon delivery of an HANWHA Robots kit:

(HND-GRP-001)

(GRP-CPL-062)

(HND-TIP-START-KIT)

(CBL-COM-2065-10-HF)

(ACC-ADT-USB-RS485)

Hand-E

Gripper Coupling

Fingertip Starting Kit

High-Flex Device Cable

USB to RS485 Adapter

Necessary Hardware

2.TOOLS YOU NEED

6.SOFTWARE INSTALLATION

5.WIRING

4.MOUNTING

This step-by-step guide will allow you to install and test

your Hand-E Gripper on HANWHA Robots.

3.GET THE LATEST

PLEASE READ THE INSTRUCTION MANUAL

BEFORE OPERATING THE GRIPPER.

• Browse to support.robotiq.com

• Download the plugin at the root of the USB stick.

To install the plugin, you must be logged in as an administra-

tor.

• Have a USB stick that contains the plugin (step 3).

• Insert the USB stick in the teach pendant or controller

• In the left pane, select Management

• Tap on RodiX Plugin Management tab

• Tap the Add button to launch the file explorer. Then, the

external and internal storage paths are displayed

• Select the plugin you want to install and click the OK button

• To get back to normal operations, restart the system.

• The red (24V) and black (0V) wires of the device cable

(CBL-COM-2065-10-HF) provide power to the Gripper.

• Connect the red wire to a 24V pin.

• Connect the black wire to a 0V pin.

• Connect the communication wires in the USB converter

(ACC-ADT-USB-RS485) as shown.

• Connect the USB converter to the Aubo controller.

• Mount the coupling (GRP-CPL-062) on your robot arm.

Align with the provided dowel pin*.

• Fix using the provided M6 screws (use of threadlocker is

recommended).

• Mount the Gripper (HND-GRP-001) on the coupling.

Align with the dowel pin.

• Fix using the provided M5 screws.

• Plug the device cable (CBL-COM-2065-10-HF) into the

Gripper’s pigtail cable and fix the cable along the robot

arm using a cable routing system.

THANK YOU FOR

CHOOSING ROBOTIQ

LEAVE ENOUGH EXCESS CABLE TO ALLOW

FULL ROBOT MOVEMENT.

4 mm

Hex Key

2 mm

Slotted Screwdriver

485+

485-

485 GND

(1)

(2)

(3)

(CBL-COM-2065-10-HF)

WHITE

Pin Signal Name

485 + (A)

SHIELD

CBL-COM-2065-10-HF

High-Flex Device Cable

GREEN

485 GND

485 - (B)

(Gripper)

(M5 screws)

*The dowel pin is meant to have a tight t on the robot side and a

slip t on the eector side of the assembly.

(M6 screws)

(Gripper coupling)

(Dowel pin*)

CAREFUL !

FRAGILE PINS

[email protected]

T: 1.418.380.2788 option 3

May 2019

V1.0

HAND-E

QUICK START GUIDE

support.robotiq.com

New product has a 1-year warranty from the above date.

Refer to your product instruction manual for details.

For installation on

HANWHA robots

• In the dashboard, the Gripper can either be closed or

opened, using the E-Open or E-Close button.

To control the gripper directly from the program:

• Insert a gripper node in the program (see step 9)

• Tap the Gripper icon in the program to display Gripper

settings.

8. TEST AND JOG

THE GRIPPER

7. ACTIVATE

THE GRIPPER

• Go to the RodiX menu on the left and select Gripper.

9. USE NODES TO PROGRAM

WITH THE GRIPPER

• Go to the Command tab

• If no device is detected, tap the Scan button.

• Once a device is detected, tap the Activate button.

The gripper will go through its' activation cycle.

• Io change the settings and jog the gripper, tap the Edit

action button.

• Once done, tap the Save action button.

• Tap the RodiX tab at the top of the screen and then

tap the Gripper icon to insert a gripper node.

Andere Handbücher für HAND-E

Andere ROBOTIQ Robotik Handbücher

ROBOTIQ

ROBOTIQ AX Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ AirPick Bedienungs- und Wartungshandbuch

ROBOTIQ

ROBOTIQ 2F-85 Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ UR3 Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ ETF-CB-UR-KIT Bedienungsanleitung

ROBOTIQ

ROBOTIQ AirPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ AX Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ HAND-E Bedienungs- und Wartungshandbuch

ROBOTIQ

ROBOTIQ HAND-E Bedienungsanleitung

ROBOTIQ

ROBOTIQ 2F-85 Bedienungsanleitung

ROBOTIQ

ROBOTIQ AIR PICK Bedienungsanleitung

ROBOTIQ

ROBOTIQ S Model Bedienungsanleitung

ROBOTIQ

ROBOTIQ PALLETIZING SOLUTION Bedienungs- und Wartungshandbuch

ROBOTIQ

ROBOTIQ AirPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ 3-Finger Adaptive Robot Gripper Bedienungsanleitung

ROBOTIQ

ROBOTIQ Gripper Bedienungsanleitung

ROBOTIQ

ROBOTIQ EPick Bedienungsanleitung

ROBOTIQ

ROBOTIQ POWERPICK20 Bedienungs- und Wartungshandbuch

ROBOTIQ

ROBOTIQ PE Series Bedienungsanleitung

ROBOTIQ

ROBOTIQ AX10 Bedienungsanleitung

ROBOTIQ

ROBOTIQ EPick Bedienungsanleitung

Beliebte Robotik Handbücher anderer Marken

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Bedienungsanleitung

SunFounder

SunFounder PiDog Bedienungsanleitung

Universal Robots

Universal Robots UR5 Bedienungsanleitung

Universal Robots

Universal Robots E Series Bedienungsanleitung

YASKAWA

YASKAWA MOTOMAN-MPL80 II Bedienungsanleitung

EFORT

EFORT ECR5 Gebrauchsanweisung

Epson

Epson C8 Series Bedienungsanleitung

WowWee

WowWee ROBOQUAD Bedienungsanleitung

Milvus Robotics

Milvus Robotics SEIT 100 Bedienungsanleitung

RoboMaster

RoboMaster AI Robot 2020 Standard Version Bedienungsanleitung

fischertechnik

fischertechnik Mini Bots Bedienungsanleitung

YASKAWA

YASKAWA MA2010 Handbuch

Abicor Binzel

Abicor Binzel iCAT mini Bedienungsanleitung

ABB

ABB OmniCore E10 Bedienungsanleitung

YASKAWA

YASKAWA Motoman DX200 Bedienungsanleitung

pitsco

pitsco Tetrix Max Bedienungsanleitung

ECOVACS

ECOVACS DEEBOT R95 Bedienungsanleitung

Feng Yuan

Feng Yuan Interstellar Warrior Bedienungsanleitung