Rockford Fosgate Punch 40I Bedienungsanleitung

2-CHANNEL DSM AMPLIFIERS

UNCH

40I/

UNCH

60IX

UNCH

100IX

UNCH

200IX

OWNER’SMANUAL

Dear Customer,

Congratulations on your purchase of the world’s finest brand of car

audio amplifiers. At Rockford Fosgate we are committed to musical

reproduction at its best, and we are pleased you chose our product.

Through years of engineering expertise, hand craftsmanship and

critical testing procedures, we have created a wide range of products

that reproduce music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new

Rockford

Fosgate product installed by an Authorized

Rockford

Fosgate Dealer, as we provide specialized training through Rockford

Technical Training Institute

(RTTI). Please read your warranty and

retain your receipt and original carton for possible future use.

To add the finishing touch to your new Rockford Fosgate image

order your

Rockford

accessories, which include everything from

T-

shirts and jackets to hats and sunglasses.

To get a free brochure on

Rockford

Fosgate products and

Rockford

accessories, please call 602-967-3565 or FAX 602-967-8132. In

Canada, call Korbon Trading at

05-567-1929. For International

orders, FAX

+001-l-602-967-8132

or call +001-l-602-967-3565.

PRACTICE SAFE SOUND™

CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS OVER

1OOdB

MAY CAUSE PERMANENT HEARING LOSS. HIGH POWERED

AUTOSOUND SYSTEMS MAY PRODUCE SOUND PRESSURE LEVELS

WELL OVER 130dB. USE COMMON SENSE AND PRACTlCE SAFE SOUND.

The serial

number can be found on the outside of the box.

Please record it

in the space provided below as your permanent record. This will serve as

verification of your factory warranty and may become useful in recovering

your amplifier if it is ever stolen.

Serial Number:

Model Number:

............................................................................ 8

Trunk Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Passenger Compartment

Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wiring

the System

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mono

Bridging

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Internal Crossover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sample Wiring Diagrams

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Dynamic Power Measurements

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty

Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TABLE OF CONTENTS S

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Punch Accessory

Pack

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Introduction

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating

Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Design

Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. .

Installation Considerations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tools Needed

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Battery and Charging

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Mounting Location

-2-

PUNCH ACCESSORY PACK

12’ (365.76cm)

Blue Remote

Turn-on Wire

17’ (518.16cm)

Red Power Wire

1.5’ (45.72cm)

Black Grounding Wire

Power Ring

Terminals

Remote Turn-on Wire

Connector Plug

Hex Head and

Mounting Screws

Power Fuse Holder with

fuse for Punch 200ix

Power Fuse Holder

with Fuse for Punch

40i,

60ix, and 100ix

Punch

Owner’s

Manual

INTRODUCTION

This manual provides information on the features, installation and

operation of the Punch 40i DSM, 60ix DSM, 1

00ix

DSM and 200ix

DSM amplifiers. We suggest you save this manual for future refer-

ence.

We strongly recommend you have your Authorized Rockford Fosgate

Dealer and Service Center install the new amplifier. If you do choose

to install the amplifier yourself, please be sure to read the entire

manual before beginning.

PERATING

EATURES

The Punch 2-channel amplifiers offer unmatched quality and reliabil-

ity in high performancesound systems. The Punch amplifiers are built

using integrated Discrete Surface Mount (DSM) technology. All

components are mounted directly on the main circuit board. This

shortens the signal path resulting in improved sound quality and

reliability. Features include:

Input level Controls -The adjustable input level controls are preset

atthefactoryto match with most popular source units. However, they

may be adjusted to allow precise matching with a wide range of

sources.

Punch Equalization Controls

The Punch bass and treble are finely

calibrated equalizer controls which are designed to correct for

frequency response problems found in most automobile interiors.

These controls make it possible to fine tune and adjust for the listening

environment when you are not using an external equalizer. When

used in combination with an equalizer the Punch controls should be

set to the flat position, fully counterclockwise.

Cast Aluminum

Heatsink

The oversized heatsink used on all the

Punch amplifiers is of cast aluminum construction. This provides

better heat dissipation to protect the circuit from thermal damage and

improve long term reliability.

End Caps- The bolt-on end caps add a visually symmetrical finish to

the amplifier. After the installation is complete, use the end caps to

cover the wires and give your system a clean, uncluttered look.

-4-

1. Speaker Terminals

The custom heavy duty speaker terminals are resistant to loosening

under the continuous vibration which plagues car audio. The

terminals will accept bare wire sized from 18 to 8 gauge.

2. Power Terminals

The same type of terminal is used on the B+ and GND for the battery

power and ground connections.

3. REM Terminal

The source unit auto-antenna or accessory lead supplies power to

turn on the amplifier.

4. Gold-Plated RCA Jacks

The input jacks are gold-plated. This reduces interference in the

audio signal caused by contact degradation.

5. Input Sensitivity Controls

The input level controls are preset for 500mV which will match the

output of most source units. They can be adjusted to match input

levels ranging from 150mV to 3V.

6. Punch Equalization Controls

The Punch Equalization Controls allow for precise matching to

correct for acoustic deficiencies of the listening environment. The

Punch bass control allows a narrow band adjustment of up to

18dB

centered at 45Hz. The treble control is a wide band, hinged

adjustment with a maximum of 12dB at 20kHz. With the controls

adjusted fully counter clockwise the equalization is set flat and does

not affect the signal.

7, LED Power Indicator

The LED, located near the REM terminal, gives a visual indication

of the status of the amplifier, lighting when the unit is turned on.

*Rockford Fosgate’s Perfect Interface lineof accessories includes high quality

power and speaker wire, gold plated RCA interconnecting cable and other

products to complete your installation. Ask your Authorized Rockford

Fosgate Dealer about Perfect Interface.

-6-

INSTALLATION

ONSIDERATIONS

This section focuses on some of the vehicle considerations for

installing your new Punch Amplifier. Checking your battery and

present sound system, as well as pre-planning your system layout and

best wiring routes will save installation time. When deciding how to

lay out your new system, be sure that each component will be easily

accessible for making adjustments.

Before beginning any installation, be sure to follow these simple rules:

Be sure to carefully read and understand the instructions before

attempting to install the amplifier.

For safety, disconnect the negative lead from the battery prior to

beginning the installation.

3. For easier assembly, we suggest you run all wires prior to

mounting your amplifier in place.

Route all of the RCA cables close together and away from any

high current wires.

Use high quality connectors for a reliable installation and to

minimize signal or power loss. See your Authorized

Rockford

Fosgate Dealer for Perfect Interface wire enhancements.

Think before you drill! Be careful not to cut or drill into gas tanks,

fuel lines, brake or hydraulic lines, vacuum lines or electrical

wiring when working on any vehicle.

7. Never run wires underneath the vehicle. Running the wires

inside the vehicle provides for best protection.

Avoid running wires over or through sharp edges. Use rubber or

plastic grommets to protect any wires routed through metal,

especially the firewall.

9. ALWAYS protect the battery and electrical system from damage

with proper fusing. Install a fuseholder and fuse on the +12V

power wire within 18” (45.7 cm) of the battery terminal.

10. When grounding to the chassis of the vehicle, scrape all paint

from the metal to ensure a good, clean ground connection.

Grounding connections should be as short as possible and always

be connected to metal that is welded to the main body, or chassis,

of the vehicle.

-7-

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockford Fosgate Verstärker Handbücher

Rockford Fosgate

Rockford Fosgate Power Elite T15004 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch PBR300X1 Leitfaden

Rockford Fosgate

Rockford Fosgate 360.6 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch 551X Leitfaden

Rockford Fosgate

Rockford Fosgate PRIME R2-200X2 Leitfaden

Rockford Fosgate

Rockford Fosgate Mono Amplifier Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate PUNCH 40.2 Anleitung zur Verwendung

Rockford Fosgate

Rockford Fosgate Power 300 Mosfet amplifier Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate FFX3 Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Power 100HD Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch P500-2 Leitfaden

Rockford Fosgate

Rockford Fosgate Power T500-1bd Leitfaden

Rockford Fosgate

Rockford Fosgate T1000-4 Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch 851X Betriebsanleitung

Rockford Fosgate

Rockford Fosgate M750-1 Leitfaden

Rockford Fosgate

Rockford Fosgate PM400X4 Technisches Datenblatt

Rockford Fosgate

Rockford Fosgate T1000-4ad Leitfaden

Rockford Fosgate

Rockford Fosgate PUNCH 200 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Prime R250-4 Leitfaden

Rockford Fosgate

Rockford Fosgate Punch P200.2 Montageanleitung

Rockford Fosgate

Rockford Fosgate Punch PBR400X4D Technisches Datenblatt

Rockford Fosgate

Rockford Fosgate R750-1D Original Betriebsanleitung

Rockford Fosgate

Rockford Fosgate 301SP Betriebsanleitung

Rockford Fosgate

Rockford Fosgate 250 2-Channel, 360 2-Channel, Betriebsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung