Rockford Fosgate PUNCH X1000.1 Bedienungsanleitung

mono amplifier

operation & installation

Punch X1000.1

Dear Customer,

Congratulations on your purchase of the world's finest brand of car audio amplifiers.

At Rockford Fosgate we are fanatics about musical reproduction at its best, and we

are pleased you chose our product. Through years of engineering expertise, hand

craftsmanship and critical testing procedures, we have created a wide range of

products that reproduce music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford Fosgate

product installed by an Authorized Rockford Fosgate Dealer, as we provide

specialized training through Rockford Technical Training Institute (RTTI).

Please read your warranty and retain your receipt and original carton for possible

future use.

Great product and competent installations are only a piece of the puzzle when it

comes to your system. Make sure that your installer is using 100% authentic

installation accessories from Connecting Punch in your installation. Connecting

Punch has everything from RCA cables and speaker wire to Power line and battery

connectors. Insist on it! After all, your new system deserves nothing but the best.

To add the finishing touch to your new Rockford Fosgate image order your Rockford

wearables, which include everything from T-shirts and jackets to hats and

sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford accessories, in

the U.S. call 480-967-3565 or FAX 480-967-8132. For all other countries, call

+001-480-967-3565 or FAX +001-480-967-8132.

PRACTICE SAFE SOUND™

CONTINUOUS EXPOSURE TO SOUND PRESSURE LEVELS OVER 100dB MAY CAUSE PER-

MANENT HEARING LOSS. HIGH POWERED AUTOSOUND SYSTEMS MAY PRODUCE SOUND

PRESSURE LEVELS WELL OVER 130dB. USE COMMON SENSE AND PRACTICE SAFE SOUND.

If, after reading your manual, you still have questions regarding this product, we rec-

ommend that you see your Rockford Fosgate dealer. If you need further

assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial

number, model number and date of purchase available when you call.

The serial number can be found on the outside of the box. Please record it in the

space provided below as your permanent record. This will serve as verification of

your factory warranty and may become useful in recovering your amplifier if it is

ever stolen.

Serial Number: __________________________________

Model Number:__________________________________

Visit our website for the latest information on all Rockford products.

Table of Contents

Specifications............................................................................................1

Introduction ..............................................................................................3

Amplifier Accessory Pack..........................................................................3

Amplifier Feature Chart ............................................................................4

Design Features ........................................................................................5

Installation Considerations........................................................................7

Mounting Location....................................................................................8

Battery and Charging ................................................................................9

Wiring the System ..................................................................................10

Installation ..............................................................................................11

Troubleshooting ......................................................................................15

Warranty Information..............................................................................17

International Information ........................................................................18

Sections marked

TROUBLESHOOTING

include recommendations for

curing installation problems

Sections marked

INSTALLATION

include “slam dunk”

wiring connections

Welcome to Rockford Fosgate! This manual is designed to provide

information for the owner, salesperson and installer. For those of you

who want quick information on how to install this product, please turn

to the Installation Section of this manual or refer to the icons listed

below. Other information can be located by using the Table of

Contents. We, at Rockford Fosgate, have worked very hard to make

sure all the information in this manual is current. But, as we are con-

stantly finding new ways to improve our product, this information is

subject to change without notice.

GETTING STARTED

Specifications

*recommended fuse not supplied

System Model X1000.1

Frequency Response: 10-250Hz ± 3dB

Bandwidth: 10-250Hz ± 3dB

Input Sensitivity: 125mV to 2.8V

Protection: Over - current protection

Battery under - over voltage protection

Thermal protection

Battery Fuse: 100 Amperes

Input Impedance: 20kΩ

Number of Channels: Mono Amplifier <1% THD + N

RMS Continuous Power: 500W into 4Ω

with <1% THD

1000W into 2Ω

with <1% THD

Signal to Noise Ratio: 90dB A-weighted

Crossover Slope: 24dB/octave Butterworth

Crossover Frequency Range: 50 to 250Hz

Recommended Fuse: 100amps*

Amplifier Accessory Pack

The accessory pack included with each amplifier contains the mounting

hardware necessary to secure the amp to the vehicle and to attach the end

caps to the amplifier.

•Installation & Operation Manual

•Punch Verification Certificate

•(4) Amplifier mounting screws (#8 x 3/4" Phillips)

•(2) Speaker Connector Set Screws (3/32" Allen)

•(2) Power Connector Set Screws (1/8" Allen)

•(4) Endbell Mounting Screws (9/64" Allen)

•(1) Allen Wrench (1/8")

•(1) Allen Wrench (9/64")

•(1) Allen Wrench (3/32")

•(1) Remote Punch Bass ( replacement part # WP - 2429)

•(1) Remote Punch Bass bracket screws ( 4 x 7/16”Phillips )

Power Mono Amplifier Feature Chart

POWER AMPLIFIER

# of Channels 1

Stable Into: (mono) 2Ω

CIRCUITRY

MEHSA1- heat dissipating technology

TOPAZ2- patented noise eliminating circuitry

DSM - discrete surface mount

MOSFETS - power supply & output devices

STARDUST3

FEATURES

Die Cast Heatsink

RCA Inputs

Pass Thru - feeds signal to aux. amp (eliminates “Y”adapters

Pwr/Spk Block Terminals

4 Gauge PWR/GND

Variable Punch Bass (0db - + 18db @ 45Hz) (remote)

Variable Xover (50Hz - 250Hz)

Crossover Slope (Butterworth) 24db/octave

Subsonic Filter

1Additional information on features, specifications and system designs can be

found at: www.rockfordfosgate.com

2TOPAZ is patented under "U.S. Patent No. 5,751,823"

3STARDUST (patent pending)

Design FeatureS

1. Cast Aluminum Heatsink –The cast aluminum heatsink of the Punch

amplifier dissipates heat generated by the amplifier's circuitry. The

inherent advantage of casting provides a 30% improvement of cooling

over conventional extrusion heatsink designs.

2. Speaker Terminals –The heavy duty, gold-plated terminal block con-

nectors (+ and –) will accept wire sizes from 8 AWG to 18 AWG. These

gold-plated connectors are immune to corrosion that can cause signal

deterioration.

3. B+ and GND Terminals –The heavy duty, gold-plated terminal block

connectors (B+ and GND) will accept wire sizes from 4 AWG to 12

AWG. These gold-plated connectors are immune to corrosion that can

cause signal deterioration.

4. REM Terminal –This spade terminal is used to remotely turn-on and

turn-off the amplifier when +12V DC is applied.

5. RCA Input Jacks –The industry standard RCA jacks provide an easy

connection for signal level input. They are gold-plated to resist the

signal degradation caused by corrosion.

6. RCA Pass-Thru Jacks –The Pass-Thru provides a convenient source

for daisy-chaining an additional amplifier without running an extra

set of RCA cables from the front of the vehicle to the rear amplifier

location.

7. Gain Control –The input gain control is preset to match the output

of most source units. It can be adjusted to match output levels from

a variety of source units.

8. Remote Punch Bass - The Punch Bass control helps correct for

acoustical deficiencies in the listening environment by helping repro-

duce full range sound without excessive boost. The Punch Bass con-

trol is a narrow band adjustment centered at 45Hz variable from 0db

to + 18db. Connection is made with a cable using RJ - 45 and can be

installed under the dash for remote access.

9. Variable Crossover –The amplifiers have a built-in 24dB/octave

Butterworth filter with a crossover point variable from 50Hz to

250Hz. The crossover can be set to Low-Pass (LP).

10. Power Indicator –The red LED on end illuminates when the unit is

turned on.

11. Protect LED - The LED illuminates when the unit is latched into pro-

tection. It requires momentary AP removal to enable output PWM.

12. Subsonic Filter - A high pass filter designed to prevent frequencies

below the audio range from being applied to the core of the amplifi-

er. Consequently, improving loud speaker performance and power

handling.

Design Features

Installation Considerations

This section focuses on some of the vehicle considerations for installing

your new Punch amplifier. Checking your battery and present sound sys-

tem, as well as pre-planning your system layout and best wiring routes,

will save installation time. When deciding how to lay out your new sys-

tem, be sure that each component will be easily accessible for making ad-

justments.

Before beginning any installation, be sure to follow these simple rules:

1. Be sure to carefully read and understand the instructions before at-

tempting to install the amplifier.

2. For safety, disconnect the negative lead from the battery prior to

beginning the installation.

3. For easier assembly, we suggest you run all wires prior to mounting

your amplifier in place.

4. Route all of the RCA cables close together and away from any high

current wires.

5. Use high quality connectors for a reliable installation and to minimize

signal or power loss.

6. Think before you drill! Be careful not to cut or drill into gas tanks,

fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring

when working on any vehicle.

7. Never run wires underneath the vehicle. Running the wires inside the

vehicle provides the best protection.

8. Avoid running wires over or through sharp edges. Use rubber or plas-

tic grommets to protect any wires routed through metal, especially the

firewall.

9. ALWAYS protect the battery and electrical system from damage with

proper fusing. Install a fuseholder and appropriate fuse on the +12V

power wire within 18”(46 cm) of the battery terminal.

10. When grounding to the chassis of the vehicle, scrape all paint from

the metal to ensure a good, clean ground connection. Grounding

connections should be as short as possible and always be connected

to metal that is welded to the main body, or chassis, of the vehicle.

Mounting Location

The mounting location and position of your amplifier will have a great

effect on its ability to dissipate the heat generated during normal opera-

tion. The design of our cast aluminum heatsink serves to easily dissipate

the heat generated over a wide range of operating conditions. However, to

maximize the performance of your amplifier, care should be taken to

ensure adequate ventilation.

Trunk Mounting

Mounting the amplifier vertically on a surface with the fin grooves run-

ning up and down will provide the best cooling of the amplifier.

Mounting the amplifier on the floor of the trunk will work but provides

less cooling capability than vertical mounting.

Mounting the amplifier upside down to the rear deck of the trunk will not

provide proper cooling and will severely affect the performance of the

amplifier and is strongly not recommended.

Passenger Compartment Mounting

Mounting the amplifier in the passenger compartment will work as long as

you provide a sufficient amount of air for the amplifier to cool itself. If you

are going to mount the amplifier under the seat of the vehicle, you must

have at least 1" (2.54cm) of air gap around the amplifier's heatsink.

Mounting the amplifier with less than 1" (2.54cm) of air gap around the

amplifier's heatsink in the passenger compartment will not provide proper

cooling and will severely affect the performance of the amplifier and is

strongly not recommended.

Engine Compartment Mounting

Rockford Fosgate amplifiers should never be mounted in the engine com-

partment. Not only will this void your warranty but could create an

embarrassing situation caused by the ridicule from your friends.

Inhaltsverzeichnis

Andere Rockford Fosgate Verstärker Handbücher

Rockford Fosgate

Rockford Fosgate Power 350S Leitfaden

Rockford Fosgate

Rockford Fosgate PUNCH 45.2 Installations- und Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Marine M400-4D Original Betriebsanleitung

Rockford Fosgate

Rockford Fosgate punch 40X2 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch PBR300X1 Technisches Datenblatt

Rockford Fosgate

Rockford Fosgate PUNCH 100ix Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Power Elite T15004 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Marine M400-4D Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch PBR300X1 Leitfaden

Rockford Fosgate

Rockford Fosgate Punch 201S Betriebsanleitung

Rockford Fosgate

Rockford Fosgate RFK-HDRK Leitfaden

Rockford Fosgate

Rockford Fosgate punch 160X4 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate M750-1 Leitfaden

Rockford Fosgate

Rockford Fosgate PM400X4 Technisches Datenblatt

Rockford Fosgate

Rockford Fosgate PUNCH 301X Leitfaden

Rockford Fosgate

Rockford Fosgate T400X2ad Leitfaden

Rockford Fosgate

Rockford Fosgate Power T1500-1bd Leitfaden

Rockford Fosgate

Rockford Fosgate Power 300 Mosfet amplifier Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch 30 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate 125.2 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate 250 2-Channel, 360 2-Channel, Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch 100 Leitfaden

Rockford Fosgate

Rockford Fosgate 360.6 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate POWER 1000 MOSFET Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung