Rockford Fosgate 2300 Bedienungsanleitung

®®

2300 / 2600X/ 4600X

AMPLIFIERS

OWNER'SMANUAL

Series 1

Dear Customer,

Congratulations on your purchase of America’s finest brand of car audio

amplifiers. AtRockfordFosgatewearecommittedtomusicalreproduction

at its best, and we are pleased you chose our product. Through years of

engineering expertise, hand craftsmanship and critical testing procedures

wehave createda widerange ofproducts thatreproduce musicwith allthe

clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford

Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we

providespecializedtrainingthroughRockfordTechnicalTrainingInstitute

(RTTI). Please read your warranty and retain your receipt and original

carton for possible future use.

To add the finishing touch to your new Rockford Fosgate image order your

Rockfordaccessories,whichincludeeverythingfromT-shirtsandjacketsto

hats and sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford accesso-

ries, please call 1-800-366-2349 or FAX 1-602-894-1528 in the U.S. For

Canada,callKorbonTradingat905-567-1920.ForInternationalordersFAX

+001-1-602-967-8132 or call +001-1-602-967-3565.

The serial number can be found on the outside of the box. Please record it

in the space provided below as your permanent record. This will become

useful in recovering your amplifier if it is ever stolen and serve as verifica-

tion of your factory warranty.

Serial Number: ____________________

Model Number:____________________

PRACTICE SAFE SOUND™

CONTINUOUSEXPOSURETOSOUNDPRESSURELEVELSOVER100dB

MAY CAUSE PERMANENT HEARING LOSS. HIGH POWERED

AUTOSOUND SYSTEMS MAY PRODUCE SOUND PRESSURE LEVELS

WELLOVER130dB.USECOMMONSENSEANDPRACTICESAFESOUND.

TABLE OF CONTENTS

Specifications.................................................................................... 1

Introduction ...................................................................................... 3

Operating Features ..................................................................... 3

Design Features................................................................................. 4

Installation Considerations ................................................................ 6

Tools Needed ............................................................................. 7

Battery & Charging............................................................................ 7

Mounting Locations .......................................................................... 7

Trunk Mounting.......................................................................... 7

Passenger Mounting ................................................................... 8

Wiring the Series 1............................................................................ 8

Power......................................................................................... 8

Ground....................................................................................... 8

Remote Turn-on ......................................................................... 8

Input........................................................................................... 9

Speakers ..................................................................................... 9

Bridged/Mono Configuration ...................................................... 9

Active Crossover Mode Selections for the 2600x and 4600x ........... 10

Crossover Frequency Settings ................................................... 10

Wiring Diagrams............................................................................. 11

Troubleshooting .............................................................................. 17

Dynamic Power Measurements....................................................... 20

Warranty Information...................................................................... 22

– 1 –

SPECIFICATIONS

Series 1 2300 Series 1 2600x Series 1 4600x

Dynamic Power Rating (IHF 202 Standard) - Measured at 14.4 Voltage1

Bridged/Mono into a 4ΩLoad 90 Watts 180 Watts 180 Watts x 2

Per channel into a 2ΩLoad 45 Watts 90 Watts 90 Watts x 4

Per channel into a 4ΩLoad 30 Watts 60 Watts 60 Watts x 4

Continuous Power Rating (IASCA Standard) - Measured at 12.6 Battery Voltage

RMS continuous power per channel, all channels

driven into a 4Ωload from 20 to 20,000 Hz with less

than 0.08% Total Harmonic Distortion (THD) 15 Watts 30 Watts 30 Watts x 4

RMS continuous power per channel, all channels

driven into a 2Ωload from 20 to 20,000 Hz, with less

than 0.3% Total Harmonic Distortion (THD) 30 Watts 60 Watts 60 Watts x 4

RMS continuous power bridged/mono into a 4Ωload

from 20 to 20,000 Hz with less than 0.3% Total

Harmonic Distortion (THD) 60 Watts 120 Watts 120 Watts x 2

1See Appendix A - Dynamic Power Measurements for information on these specifications.

– 2 –

Series 1 2300 Series 1 2600x Series 1 4600x

Signal-to-Noise Ratio Over 105 dB A weighted

Bandwidth 10 Hz to 100 kHz ±3dB

Damping Factor @ 4ΩAt output connector - Over 200

Frequency Response 20 Hz to 20 kHz ±0.5dB

IM Distortion (IHF) Less than 0.05%

Input Impedance 20k ohms

Input Sensitivity (250 mV - 1 Volt)

Protection Internal analog-computer output protection circuitry limits power in case of

overload. Thermal switch shuts down the amplifier in case of overheating.

Crossover Card N/A 12 dB/octave with selectable

High-Pass, Low-Pass and Full Range

Battery Fusing Rates 10 Amps 20 Amps 30 Amps

(External to Amplifier)

Fuse Type ATC ATC ATC

Dimensions 7.9” (20.07cm) W 7.9” (20.07 cm) W 7.9” (20.07cm) W

5.1” (12.95cm) L 6.1” (15.49cm) L 9.1” (23.11cm) L

2” (5.08cm) H 2” (5.08 cm) H 2” (5.08 cm) H

Specifications subject to change without notice.

– 3 –

INTRODUCTION

This manual provides information on the features, installation and

operation of the Series 1 2300, 2600x and 4600x Amplifiers. We

suggest you save this manual for future reference.

WestronglyrecommendyouhaveyourAuthorizedRockfordFosgate

Dealer and Service Center install your new Series 1 amplifier. If you

dochooseto install your Series1amplifier yourself, please besureto

read the entire manual before beginning.

OPERATING FEATURES

TheSeries1stereo power amplifiers provide state-of-the-art sound in

cars, vans, boats, or wherever a high current 12 volt power source is

available. Features include:

Discrete Surface Mount Technology – a manufacturing method that

allows the packaging of complex circuitry in small areas, reducing

noise and crosstalk for lower distortion.

ActiveElectronicCrossoverModule–builtintothe2600xand4600x

features12dB/octave Butterworth filters. The independent crossover

modes in these plug-in modules allow for various configuration

possibilities.

N-Type V-FET Output Drive Circuitry– delivers music with lower

noise and distortion while maintaining a higher slew rate, increased

efficiencyandhigherpoweroutputcapabilitythanmostamplifiersof

this class.

High Current/High Voltage Output – delivers the power needed for

all listening levels and music frequencies to hear every note.

Pulse Width Modulated (PWM) DC/DC Non-Regulated Power

Supply – assures wider dynamic headroom than the more common

regulated power supplies.

High or Low Level Adjustable Input Sensitivity – permits maximum

compatibility with source units. This allows adjustment of the input

sensitivity level of the power amplifier for RCA (preamp level) or

speaker (high level) inputs.

RealTimePowerProtection(R.T.P.P.)–allowsforthegreatestpower

output under all load conditions. When output reaches an unsafe

level it will be reduced, unlike current limiting which often causes

premature protection or failure to protect at all.

Gold-Plated Connectors – of high quality to provide lower resistance

and better reliability.

Series 1 Housing – The extruded aluminum heatsink design of the

Series 1 was designed for high performance cooling.

– 4 –

for 4600x model

1. Low Level RCA Input Connectors

The amplifier’s signal input female RCA pin jacks should be

connected to the source unit’s signal outputs with high quality

RCA cables. The connectors are gold plated to eliminate the

possibility of corrosion that can cause signal deterioration.

2. High Level Speaker Input Connectors

These connectors are used to connect to a source unit that does

not provide low level RCA outputs. This connector accepts 1/8"

spade lugs. Do not attempt to solder wires directly to this

connector.

3. LED Power Indicator

The LED illuminates when the unit is in operation.

4. Input Gain Control

Thiscontrolisfactorypresetto500millivoltstomatchmostradios

and is variable from 250 millivolts to one volt.

(More than likely

it will not need adjusting.)

Ifjustalittlemovementofthevolumecontrolfromthesourceunit

drives the amplifier into distortion, reduce the input gain control

so that the distortion doesn’t start until the source unit volume

control is at about 3/4 of its rotation.

DESIGN FEATURES

Input/LED Side

GND

B+

+R–+L– – R+ –L+

Bridged Bridged

–+–+

– 5 –

for 4600x model

5. Power/Speaker Connectors

The gold-plated terminal block connectors are:

GND Supplies ground to the amplifier.

AP Theamplifieristurnedonbyconnectingtheremoteturn-

on wire to the source unit's “Auto Antenna” or remote

turn-onlead,eitherofwhichshouldgoto+12voltswhen

the source unit is activated.

B+ Supplies power to the amplifier.

+R–Connect the Right and Left channel outputs to the

speakers.

The terminal block connector accepts wire sizes from 10 gauge

to 20 gauge. *

Spade connectors are not needed because of the design of the

connector. The installer should be careful not to allow wires to

fray or touch. The recommended strip length is 1/4" (.635cm).

*Rockford Fosgate’s Perfect Interface line of accessories includes high

qualitypowerandspeakerwire,gold-platedRCAinterconnectingcables

and other products to complete your installation. Ask your Authorized

Rockford Fosgate Dealer about Perfect Interface.

Power/Speaker Side

+L–

INSTALLATION CONSIDERATIONS

– 6 –

This section focuses on some of the vehicle considerations for

installing your new Series 1 amplifier. Checking your battery and

currentsoundsystem,aswellaspre-planningyoursystemlayoutand

bestwiring routes willsaveinstallationtime. Whendecidinghowto

lay out your new system, be sure that each component will be easily

accessible for making adjustments.

Before beginning any installation, be sure to follow these simple

rules:

1. Be sure to carefully read and understand the instructions before

attempting to install the amplifier.

2. For safety, disconnect the battery ground cable prior to begin-

ning the installation process.

3. For easier assembly, we suggest you run all wires prior to

mounting your amplifier in place.

4. Use only quality connectors for making connections. See your

Authorized Rockford Fosgate Dealer for Perfect Interface wire

enhancements.

5. Thinkbeforeyoudrill! Becarefulnottocutordrillintogastanks,

fuel lines, brake or hydraulic lines, vacuum lines or electrical

wiring when working on any vehicle.

6. Never run wires underneath the vehicle. Running the wires

inside the vehicle provides for the best protection.

7. Avoidrunning wiresoverorthroughsharpedges. Userubberor

plasticgrommets to protectwires routed through holes inmetal.

8. ALWAYS protect the battery and electrical system from damage

withproperfusing. Installafuseholderandfusewithin18”(45.7

cm)ofthebatteryterminaltosafeguardfrompossibledamageor

injury. This fuse and fuseholder is included with the Series 1

amplifier. (See installation instructions on page 8.)

9. Grounding connections should be as short as possible and

always connected to metal that is welded to the main body, or

chassis, of the vehicle.

– 7 –

TOOLS & SUPPLIES NEEDED

Wire Cutters Phillips Screwdrivers

Wire Strippers Flat Blade Screwdrivers

Wire Crimpers Battery Post Wrench

Voltmeter Electric Hand Drill with assorted bits

Power Wire - [10-12 AWG; approx. 17’ (518.72 cm)]

Grounding Wire - [10-12 AWG.; max. length 1.5’ (45.72 cm)]

Remote (AP) Turn-On Wire - [18 AWG; approx. 12’ (365.76 cm)]

Assorted wire connectors

In-line butt connectors that match power and ground wire AWG

3/8" (.953cm) Battery Ring Terminal

1/4" (.635cm) Ground Terminal

1-1/2" (3.81cm) #8 Pan Head Mounting Screws (4)

Series1amplifierswillnaturallyputanextraloadonyourbatteryand

charging system. We recommend you check your alternator capac-

itytoensureamplechargingcapabilitytohandletheadditionalload

of your new Series 1 equipment. Stock electrical systems in good

conditionwilltypicallyhandletheextraloadofanyindividualSeries

1 unit without problems, although battery and alternator life may be

slightly reduced. If problems arise, we suggest you first check the

charging system, then use a heavy duty battery and/or a high output

alternator.

The mounting location and position of the Series 1 will have a great

effect on its ability to dissipate the heat generated in normal opera-

tion. The Series 1 has a heatsink designed for heat dissipation and

internal overheating shutoff circuitry to avoid overheating. The

amplifier is reasonably tolerant of mounting variations, however,

care should be taken to ensure adequate ventilation.

TRUNK MOUNTING

The temperature inside a trunk can reach as high as 175°F (80°C)

during the summer months. Since the thermal shutoff point for the

Series 1 is 195°F (90°C), it is easy to see that the amplifier must be

mounted for maximum cooling capability. Mounting the amplifier

on the floor or under the rear parcel tray prevents sufficient convec-

tionalairflowcooling. Mountingtheunitverticallyonasurfacewith

the fin grooves running up and down usually results in the best

cooling.

MOUNTING LOCATIONS

BATTERY AND CHARGING

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockford Fosgate Auto-Verstärker Handbücher

Rockford Fosgate

Rockford Fosgate 550X Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch 150 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch P200.2 Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Prime R150-2 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch 500.2 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Marine M400-4D Original Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Power Elite T3002 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch PBR300X1 Leitfaden

Rockford Fosgate

Rockford Fosgate PM400X4 Technisches Datenblatt

Rockford Fosgate

Rockford Fosgate Punch 300X Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch 45 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate punch 120 Leitfaden

Rockford Fosgate

Rockford Fosgate puch 250m2 Leitfaden

Rockford Fosgate

Rockford Fosgate Punch200 trans ana 4-channel Leitfaden

Rockford Fosgate

Rockford Fosgate Punch P200.2 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch P200.2 Original Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch P1000X5D Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Prime R600-5 Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch P4004 Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Power Elite T4004 Betriebsanleitung

Rockford Fosgate

Rockford Fosgate Punch P450.4 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch 100z2 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate X1 Bedienungsanleitung

Rockford Fosgate

Rockford Fosgate Punch P500X4D Original Betriebsanleitung

Beliebte Auto-Verstärker Handbücher anderer Marken

Cyfre

Cyfre CHACDMA-819 Bedienungsanleitung

MTX

MTX Thunder Marine TM904 Bedienungsanleitung

MTX

MTX Thunder TA Super TA92001 Bedienungsanleitung

Lanier

Lanier 480-0239 Bedienungs- und Wartungsanleitung

Kenwood

Kenwood KAC-642 Bedienungsanleitung

Pioneer

Pioneer GM-D8500M Bedienungsanleitung

Jensen

Jensen XA4150 Bedienungsanleitung

Sony

Sony XM-405EQX Marketing Specifications Bedienungsanleitung

Audiopipe

Audiopipe AQX-660.2 Bedienungsanleitung

Clarion

Clarion APA2001 APA2001 APA2001 Kurzanleitung

Sony

Sony XM-7547 Bedienungsanleitung

Alpine

Alpine PDX11000 - Amplifier Bedienungsanleitung

Steg

Steg Qx Mos 105.4x Bedienungsanleitung

JL Audio

JL Audio HD900/5 Bedienungsanleitung

Memphis

Memphis 16-MC5.700 Bedienungsanleitung

Audiopipe

Audiopipe APSM-1150 Bedienungsanleitung

Boss Audio Systems

Boss Audio Systems Riot GT1000M Bedienungsanleitung

Kenwood

Kenwood KAC-PS811D Bedienungsanleitung