Roland VS-700C Bedienungsanleitung

VS-700C Console System Program Version 1.31

This system program updates your VS-700C Console to the latest version 1.31.

Checking the version

Before proceeding to the download, follow the instructions below to check the version.

1. Turn off the power of the VS-700C.

2. Turn on the switch "8" (move it upward) at SETTING on the rear panel to enter the update mode.

3. Turn on the power again.

4. Check the versions of VS-700C shown on the LCD display.

*No update required if the version was 1.31 or later.

5. Turn off the power then turn off the switch "8" (move it downward) on the rear panel.

Update history

Ver.1.31

Fixed the phenomenon that touch sense of faders might reduce sensitivity on Ver.1.30.

Ver.1.30

*VS-700C driver Ver.2.0.0 or later is required for Windows.

*VS-700C driver Ver.1.0.0 or later is required for Mac OS X.

Lower latency available. Super low latency and high stability has brought by newly introduced "VS

STREAMING" technology.

Things to prepare

Following items will be required to update the VS-700C to the latest version.

VS-700C

Windows or Mac with the system requirements, VS-700C driver installed.

A USB cable

Caution when performing the update ( IMPORTANT !! )

Never power-off your VS-700C while the update is in progress!

If a power failure or similar accident occurs during the update process, the VS-700C won’t be able to

start up in normal operating mode. This will require servicing, so you will need to contact Roland service

center near you if this occurs.

Downloading and expanding the archive

Download the "vs700c_sysw_v131.zip" for Windows or "vs700c_sysm_v131.zip" for Mac to the desktop or

any location. Downloaded file is an archive file in zip format. After expanding the archive, the folder

"vs700c_sys_v131" will be available, which contains system update files "p00001.mid", "p00002.mid" and

"UpdSMF" simple SMF player application.

How to install

Install the expanded files to the VS-700C with instructions below.

* Be sure that VS-700C driver is installed to Windows PC or Mac beforehand and that it has been properly

configured as a stand-alone device (without the VS-700R connected)

* VS-700C driver Ver.2.0.0 or later is required for Windows.

* VS-700C driver Ver.1.0.0 or later is required for Mac OS X.

1. Download the VS700 update file, then extract the contents of the package by right-clicking on it and

choosing "Extract All". On Mac OSX extract by double-clicking. Note: be sure to unzip it to a location on

your computer that you can find later

2. Locate and extract the contents of the folder for the firmware version you wish to install.

3. Be sure the VS-700C is turned off.

4. Remove all USB cables from PC/Mac except for keyboard and mouse.

5. Turn on the switch "8" (move upward) of SETTING on the rear panel to enter the update mode.

6. Turn on the power of the VS-700C.

7. Connect the VS-700C to the PC/Mac with USB cable.

8. Double click on the UpdSMF(.EXE) to launch on a Windows PC, UpdSMF on a Mac.

9. Select [CONSOLE (VS-700)] as "MIDI Out Device", [CONSOLE] on a Mac.

* If you can’t find [CONSOLE (VS-700)]( [CONSOLE] on a Mac), please confirm that VS-700C driver is

installed correctly on your computer.

10. Locate the folder including the update files "p00001.mid" and "p00002.mid" to "SMF Path" or "SMF

Folder" on a Mac.

11. Click on the "Scan SMF" (not required on a Mac) then confirm that update files are on the list.

12. Press [OK/ENTER] button which is blinking at the right side of VS-700C top panel. Message "Erase" will

be available on the LCD display.

13. Press [OK/ENTER] button again. Message "Sure?" will be shown on the LCD display.

14. Press [OK/ENTER] button once more. LCD display turns to "0%".

15. Click on the "Send" on the UpdSMF. Data transfer begins.

16. Message "End" will be shown on the LCD display when the update completes successfully.

*About one minute to complete the update.

*Never turn off the power during the update process.

17. Click on the [OK] in "Send SMF / Complete" dialog window.

18. Click on the [Exit] or [QUIT] on a Mac to quit the application.

19. Turn off the power of the VS-700C then after a while turn it on again.

20. Confirm that the version is now V1.31.

21. Turn off the power of the VS-700C then turn off the switch "8" (move downward) on the rear panel.

Inhaltsverzeichnis

Andere Roland Musikmixer Handbücher

Roland

Roland BOSS BX-400 Bedienungsanleitung

Roland

Roland Sonar V-Studio VS-700 Bedienungsanleitung

Roland

Roland V-Mixer M-200i Bedienungsanleitung

Roland

Roland Edirol M-16DX Bedienungsanleitung

Roland

Roland M-12E Bedienungsanleitung

Roland

Roland SDE-330 Bedienungsanleitung

Roland

Roland Edirol M-16DX Bedienungsanleitung

Roland

Roland V-Mixer VM-C7100 Kurzanleitung

Roland

Roland TL 8 Bedienungsanleitung

Roland

Roland MC-808 Bedienungsanleitung

Roland

Roland BK-7m Bedienungsanleitung

Roland

Roland Groovebox MC-505 Betriebsanleitung

Roland

Roland VR-400UHD Bedienungsanleitung

Roland

Roland Edirol M-16DX Gebrauchsanweisung

Roland

Roland VR-6HD Benutzerhandbuch

Roland

Roland VR-5 Bedienungsanleitung

Roland

Roland M-48 Bedienungsanleitung

Roland

Roland V-Mixer M-400 Bedienungsanleitung

Roland

Roland V-Mixer M-200i Bedienungsanleitung

Roland

Roland V-Mixer VM-C7100 Bedienungsanleitung

Roland

Roland V-Bass VB-99 Bedienungsanleitung

Roland

Roland V-Mixer VM-C7100 Bedienungsanleitung

Roland

Roland M-16E Bedienungsanleitung

Roland

Roland Groovebox MC-505 Stücklistenhandbuch

Beliebte Musikmixer Handbücher anderer Marken

Neve

Neve 8816 Bedienungsanleitung

Mackie

Mackie Onyx Analogue Mixer Bedienungsanleitung

Behringer

Behringer EUROPOWER PMP518M Bedienungsanleitung

Peavey

Peavey S-32 Sanctuary Series Bedienungsanleitung

Rane

Rane MP 4 Bedienungsanleitung

True

True T9 Touchscreen Console Bedienungsanleitung

Studiomaster

Studiomaster Air Pro 24 Bedienungsanleitung

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Bedienungsanleitung

Yamaha

Yamaha MR1642 Bedienungsanleitung

Ecler

Ecler MAC40v Bedienungsanleitung

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Bedienungsanleitung

Veeder-Root

Veeder-Root TLS-350 Series Bedienungsanleitung

Alto

Alto APM80.QUAD Bedienungsanleitung

Omnitronic

Omnitronic PM-211 Bedienungsanleitung

SoundCraft

SoundCraft B400 Bedienungsanleitung

CARVIN

CARVIN RX 1200 Bedienungsanleitung

Euphonix

Euphonix MC Mix Bedienungsanleitung

Mackie

Mackie Ultra-34 Bedienungsanleitung