Roland SOLJET Pro III XC-540 Bedienungsanleitung

Setup Guide

Read this first.

This describes the setup tasks and important conditions about the installation loca-

tion that must be met in order to enable use of this machine.

Thank you very much for purchasing this product.

➢To ensure correct and safe usage with a full understanding of this product's performance, please be

sure to read through this manual completely and store it in a safe location.

➢Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

➢The contents of this operation manual and the specifications of this product are subject to change

without notice.

➢The operation manual and the product have been prepared and tested as much as possible. If you

find any misprint or error, please inform us.

➢Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may

occur through use of this product, regardless of any failure to perform on the part of this product.

➢Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may

occur with respect to any article made using this product.

Contents

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com/

To Ensure Safe Use ........................................................................................................................3

Pour utiliser en toute sécurité ...................................................................................................10

Setup Guide.........................................................................................................................................17

1.Installation Environment........................................................................................................................................ 18

Deciding On an Installation Site ................................................................................................... 18

Temperature and Humidity............................................................................................................ 19

Installation Space .......................................................................................................................... 19

2. Included Items.......................................................................................................................................................... 20

3.Assembling and Installing ....................................................................................................................................... 21

Step 1 : Assemble the Stand .......................................................................................................... 21

Step 2 : Attach the Included Items................................................................................................. 23

Step 3 : Mount the Machine .......................................................................................................... 27

Step 4 : Install the Drain Bottle...................................................................................................... 28

Step 5 : Attach the Ink-CartridgeTray ............................................................................................ 30

Step 6 : Removing the Packing Materials....................................................................................... 32

4. Connect the Cables................................................................................................................................................ 34

Connect the cable of the take-up unit ...........................................................................................34

Connect the power cable and the network cable .......................................................................... 35

5.Installing the Ink Cartridges ................................................................................................................................. 36

Filling with Ink for the First Time ................................................................................................... 36

Installing the Ink Cartridges ........................................................................................................... 36

6. Install the Blade ....................................................................................................................................................... 40

7.Network Settings .................................................................................................................................................... 42

Introduction................................................................................................................................... 42

Step 1 : Make the Nework Settings for the Computer .................................................................... 42

Step 2 : Make the Network Settings on the Printer ........................................................................ 44

Step 3 : Make the Port Settings for the Software RIP ...................................................................... 45

Used for instructions intended to alert the user to the risk of death or severe

injury should the unit be used improperly.

About WARNING and CAUTION Notices

Used for instructions intended to alert the user to the risk of injury or material

damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with re-

spect to the home and all its furnishings,as well to domestic animals or pets.

WARNING

CAUTION

About the Symbols

The symbol alerts the user to important instructions or warnings. The specific meaning of

the symbol is determined by the design contained within the triangle. The symbol at left means

"danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden). The

specific thing that must not be done is indicated by the design contained within the circle. The

symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specific thing that must be

done is indicated by the design contained within the circle. The symbol at left means the power-

cord plug must be unplugged from the outlet.

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property.

Points which must be observed to prevent such injury or damage are described as follows.

To Ensure Safe Use

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to touch

it.

Incorrect usage or handling may lead to an acci-

dent.

Keep children away from the machine.

The machine includes areas and components

that pose a hazard to children and may result in

injury,blindness,choking,or other serious acci-

dent.

Never operate the machine while tired or

after ingesting alcohol or any medication.

Operation requires unimpaired judgment. Im-

paired judgment may result in an accident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that exceeds

its capacity.

Doing so may result in injury or fire.

For accessories (optional and consumable

items, power cord,and the like), use only

genuine articles compatible with this ma-

chine.

Incompatible items may lead to an accident.

Before attempting cleaning,maintenance,

or attachment or detachment of optional

items,disconnect the power cord.

Attempting such operations while the machine

is connected to a power source may result in

injury or electrical shock.

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in fire, electrical shock,or

injury.Entrust repairs to a trained service tech-

nician.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertentcontact withcertain areasmaycause

the hand or fingers to be pinched or become

caught.Use care when performing operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the machine,

resulting in injury.

Conduct operations in a clean,brightly lit

location.

Working in a location that is dark or cluttered

maylead toanaccident,suchasbecoming caught

in the machine as the result of an inadvertent

stumble.

Never climb or lean on the machine.

The machine is not made to support a person.

Climbing or leaning on the machine may dis-

lodge components and cause a slip or fall, re-

sulting in injury.

Caution: cutting tool.

This machine has an internal tool.To avoid in-

jury,handle the tool with care.

Incorrect operation may cause injury

To Ensure Safe Use

WARNING

Before switching on the power, set the

voltage switch to match the voltage of the

region where the unit is used.

When set incorrectly, the machine may fail to

operate normally.The temperature of the print

heaterand dryermayrise toundue levels,which

may result in fire,or the temperature may fail to

rise at the correct speed.

Connect to an electrical outlet that com-

plies with this machine's ratings (for volt-

age,frequency,and current).

Incorrect voltage or insufficient current may

cause fire or electrical shock.

Never use out of doors or in any location

where exposure to water or high humid-

ity may occur.Never touch with wet hands.

Doing so may result in fire or electrical shock.

Never allow any foreign object to get in-

side.Never expose to liquid spills.

Inserting objects such as coins or matches or

allowing beverages to be spilled into the venti-

lationports mayresultin fire orelectricalshock.

If anything gets inside, immediately disconnect

the power cord and contact your authorized

Roland DG Corp.dealer.

Never place any flammable object nearby.

Never use a combustible aerosol spray

nearby. Never use in any location where

gases can accumulate.

Combustion or explosion may be a danger.

WARNING

Handle the power cord,plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in fire or

electricalshock.

When using an extension cord or power

strip,use one that adequately satisfies the

machine's ratings (for voltage,frequency,

and current).

Use of multiple electrical loads on a single elec-

trical outlet or of a lengthy extension cord may

causefire.

Connect to ground.

This can prevent fire or electrical shock due to

current leakage in the event of malfunction.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency.Install

the machine next to an electrical outlet.Also,

provide enough empty space to allow immedi-

ate access to the electrical outlet.

If sparking, smoke, burning odor, unusual

sound, or abnormal operation occurs, im-

mediately unplug the power cord. Never

use if any component is damaged.

Continuingto usethemachine mayresultin fire,

electrical shock,or injury.Contact your autho-

rized Roland DG Corp.dealer.

Ratings

Danger of electrical short,shock,electrocution,or fire

To Ensure Safe Use

Important notes about the power cord,plug,and electrical outlet

Never place any object on top or subject to

damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle,bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause fire.

To Ensure Safe Use

WARNING

Keep open flame away from the work area.

Ink and discharged fluid are flammable.

Never store ink, cleaning fluid, or dis-

charged fluid in any of the following loca-

tions.

➢Any location exposed to open flame

➢Any location where high temperature

may occur

➢Near bleach or any other such oxidiz-

ing agent or explosive material

➢Any location within the reach of chil-

dren

Fire may be a danger. Accidental ingestion by

children may pose a health hazard.

Never place an ink cartridge in fire.

Ink may flow out, catch fire, and spread fire to

other nearby objects.

Never drink or sniff ink,cleaning fluid, or

discharged fluid, or allow them to come

in contact with the eyes or skin.

Doing so may be hazardous to the health.

CAUTION

Ensure adequate ventilation for the work

area.

Failing to perform ventilation may result in a

health hazard or danger of combustion due to

inkfumes.

Never allow an ink cartridge to be sub-

jected to impact, and never attempt to

disassemble.

Ink may leak.

In the event of ingestion or physical distress

➢In the event of contact with the eyes, immediately flush with water for at least 15 minutes. If eye irritation

continues,seek treatment by a physician.

➢In the event of contact with skin,immediately wash with soap.If irritation or inflammation occur,seek treat-

ment by a physician.

➢In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly

inducing vomiting may lead to danger of choking.

➢If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea

persists,seek treatment by a physician.

Ink,cleaning fluid,and discharged fluid are flammable and toxic

To Ensure Safe Use

WARNING

Install the machine in a location that is

level, stable, and able to bear the weight

of the machine.

The total weight of the machine may reach 200

kg (441 lb.) or more. Installation in an unsuit-

able location may cause a major accident, in-

cluding tipover,fall,or collapse.

Unloading and emplacement are opera-

tions that must be performed by 6 per-

sons or more.

Tasks thatrequireundue effortwhen performed

byasmall numberofpersons mayresult inphysi-

cal injury.Also,if dropped,such items may cause

injury.

WARNING

Be sure to lock the stand's casters.

If the machine should begin to topple, a major

accident may result, including crushing of the

appendages or the body.

When storing roll media, implement ad-

equate safety measures to ensure that the

stored media will not roll, fall, or topple

over.

Danger exists of becoming pinned under the

media and suffering serious injury.

Handling roll media is an operation that

must be performed by two persons or

more,and care must be taken to prevent

falls.

Attempting to lift heavy media in a manner that

taxes your strength may cause physical injury.

WARNING

Caution:high temperatures.

Areas such as the dryer become hot. Exercise

caution to avoid fire or burns.

When printing is not being performed,

remove any loaded media or switch off the

power.

The continued application of heat at a single lo-

cationmaycause thereleaseof toxic gasesfrom

the media or pose a fire hazard.

WARNING

Never use media that cannot withstand

heat.

Doing so may degrade the media,or may result

in fire or the release of toxic gases.

This machine weighs 200 kg (441 lb.).Media weighs 30 kg (67 lb.)

Danger of fire,burns,or toxic gas emissions

Andere Handbücher für SOLJET Pro III XC-540

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland VersaUV LEF-20 Gebrauchs- und Pflegehandbuch

Roland

Roland EGX-600 Bedienungs- und Wartungshandbuch

Roland

Roland Soljet Pro III XJ-540 Bedienungs- und Wartungshandbuch

Roland

Roland VersaUV LEC2-300 Bedienungsanleitung

Roland

Roland FJ-42 Bedienungsanleitung

Roland

Roland VersaUV LEC2-300 Betriebsanleitung

Roland

Roland CAMM JET CJ-70 Bedienungsanleitung

Roland

Roland TrueVIS SG-300 Bedienungsanleitung

Roland

Roland LEC-300A Bedienungsanleitung

Roland

Roland VersaUV LEF2-200 Betriebsanleitung

Roland

Roland SJ-645EX Bedienungsanleitung

Roland

Roland SC-545EX Print&Cut Bedienungsanleitung

Roland

Roland Metaza MPX-60 Bedienungsanleitung

Roland

Roland EU-1000MF Bedienungsanleitung

Roland

Roland TrueVIS VF2-640 Bedienungsanleitung

Roland

Roland VersaCAMM ECO-SOL MAX3 Bedienungsanleitung

Roland

Roland VersaUV LEF2-200 Bedienungsanleitung

Roland

Roland VersaUV LEJ-640 Bedienungs- und Wartungshandbuch

Roland

Roland Hi-Fi Express FP-740 Bedienungsanleitung

Roland

Roland VersaUV LEF2-300 Bedienungsanleitung

Roland

Roland VersaEXPRESS RF-640 Bedienungsanleitung

Roland

Roland VersaSTUDIO BN-20A Bedienungsanleitung

Roland

Roland EGX-600 Bedienungsanleitung

Roland

Roland CJ-540 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung