Roland TruVis SG Bedienungsanleitung

Roland TruVis SG/VG

SUMMER STORAGE REQUIREMENTS

320 E. 3rd Ave., Tarentum, PA 15084 724-230-2400 or 800-232-7600 www.alleghenyedusys.com Page | 1

TO DO before leaving your Roland Printer/Cutter Unattended for an

extended break (more than 2 weeks)

1. The Roland vinyl printer/cutter machines are precise devices that require proper care

in order to maintain accuracy and functionality – which includes performing a head

wash procedure during extended downtime.

2. Be sure tohave at least the minimum number ofcleaning cartridges necessary to

perform the head wash and to re-ink the machine when you return in the Fall.

3. Be sure to empty your drain bottle prior tostarting the process. Removing ink from

the lines does usea significant amount ofdrain space, and the bottle cannot be

emptied during the head wash process.

4. Be sure todispose of your drain bottle/cartridges properly, adhering to local guidelines.

PERFORM A HEAD WASH PROCEDURE:

1. Follow the instructions on the following page to perform a head wash on your printer.

2. The process does take time, so give yourself an hour or two to complete the procedure.

The overall time will depend on your machine model and dedicated time in front ofthe

unit.

3. After the head wash is complete, store your ink cartridges on a level surface, and

within a regulated temperature/humidity environment.

4. Remove any media from the roller, cover any open media rollstoprevent dust buildup.

5. Turn off the printers Sub Power and Main Power Switch on the back ofthe Printer.

6. Unplug the Printer.

Please remember that failure to do a head wash will cause ink-build up in the system and

could cause problems when returning in the Fall or shortly thereafter. These storage

related issues may not be covered under your machines warranty/extended warranty

If you have any questions regarding this process, you can email

[email protected], or call us at 800-232-7600.

Please put a copy of these instructions with the machine as a reminder.

This will help avoid extra repairs, service calls, jams, malfunctions, and other performance issues.

SG Series: Head Wash Procedure

SG-Series Head Wash

Notice: All ink is discharged during this operation. This procedure should only be performed by, or under the

guidance of an authorized Roland service agent.

Before You Begin

This procedure will require two (2) TR-CL cleaning cartridges and will take approximately 1 hour.

Perform a manual cleaning and replace worn consumables such as wipers. See User Manual.

Entering Service Mode

1. Turn the main power on and the Sub Power off.

2. Using the arrow keys enter the sequence below:

3. Now press and hold down the Left, Down, and Right arrow keys while pressing the Sub Power key. The

machine will power on in Service Mode and display the SETUP prompt.

SG Series: Head Wash Procedure

Performing Head Wash

1. From the SETUP prompt press [MENU]

2. Press the left arrow key to enter the service menu. Press the down arrow key until SUB MENU appears.

Press the left arrow to enter the SUB MENU.

3. Press the left arrow to enter the SUB MENU. Press the down arrow until HEAD WASH appears.

4. Press [ENTER] to begin the head wash process.

5. Empty drain bottle when prompted and press [ENTER]. DO NOT SKIP THIS STEP

6. When prompted to [REMOVE CARTRIDGE 1,2,3,4]. Remove all 4 cartridges.

7. Replace any two ink pouches with the TR-CL cleaning liquid pouches.

8. When prompted to [SET CL-LIQUID 1, 3] insert the TR-CL pouches you prepared earlier into slots 1 and

SG Series: Head Wash Procedure

9. When prompted to [REMOVE CL-LIQUID 1 3] pull the 2 TR-CL pouches out just enough to disengage.

You do not have to completely remove the ink trays.

10. When prompted to [SET CL-LIQUID 1, 3]. Gently push the ink trays back into place until they engage.

The [WASHING HEAD] prompt will display. This process will repeat between 3 and 7 times.

11. Once the ink lines for channels 1 and 3 have been cleaned, the LCD display will prompt you to move

the ink trays currently in channels 1 and 3 to channels 2 and 4 which are the MG and BK channels. The

same series of prompts will display for channels 2 and 4 that occurred for channels 1 and 3.

12. At the end of the process you will be prompted to [REMOVE CL-LIQUID 2, 4] and to again [EMPTY

DRAIN BOTTLE] DO NOT SKIP THIS STEP. Empty the drain bottle and press [ENTER].

13. The LCD display will default back to the [SUB MENU/HEAD WASH] prompt. DO NOT PRESS ENTER. Turn

off the sub power on the control panel as well as the main power at the rear of the machine. The

HEAD WASH process has now been completed.

Please consult the applicable setup guide when returning the printer to service.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland TrueVIS VG2-640 Betriebsanleitung

Roland

Roland FJ-500 Bedienungsanleitung

Roland

Roland iModela iM-01 Gebrauchs- und Pflegehandbuch

Roland

Roland VersaCamm SP-300V Bedienungsanleitung

Roland

Roland VersaStudio BN-20 Bedienungsanleitung

Roland

Roland EGX-400 Bedienungsanleitung

Roland

Roland TrueVIS VG3-640 Bedienungsanleitung

Roland

Roland CammJet CJ-500 Bedienungsanleitung

Roland

Roland VersaUV LEF2-300 Bedienungsanleitung

Roland

Roland LEC-300 Betriebsanleitung

Roland

Roland CJ-540 Bedienungsanleitung

Roland

Roland SOLJET Pro 4 XF-640 Bedienungsanleitung

Roland

Roland XC-540MT Bedienungsanleitung

Roland

Roland TrueVIS SG2-640 Bedienungs- und Wartungshandbuch

Roland

Roland TrueVIS AP-640 Bedienungsanleitung

Roland

Roland SOLJET Pro III XC-540 Bedienungs- und Wartungshandbuch

Roland

Roland VersaStudio BN-20 Gebrauchs- und Pflegehandbuch

Roland

Roland VersaSTUDIO BN-20A Bedienungsanleitung

Roland

Roland Metaza MPX-80 Bedienungsanleitung

Roland

Roland SJ-1045EX Bedienungsanleitung

Roland

Roland VersaUV LEJ-640 F Bedienungsanleitung

Roland

Roland SolJet Pro II V SC-545EXW Bedienungsanleitung

Roland

Roland SC-545EX Print&Cut Bedienungsanleitung

Roland

Roland Versa UV LEF-12 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung