Roland SC-545EX Print&Cut Bedienungsanleitung

Thank you very much for purchasing the product.

• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read

through this manual completely and store it in a safe location.

• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.

• The contents of this operation manual and the specifications of this product are subject to change without notice.

• The operation manual and the product have been prepared and tested as much as possible. If you find any

misprint or error, please inform us.

• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur through

use of this product, regardless of any failure to perform on the part of this product.

• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with

respect to any article made using this product.

User’s Manual

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE

STATEMENT

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated

in a commercial environment.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference

to radio communications.

Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Unauthorized changes or modification to this system can void

the users authority to operate this equipment.

For Canada

CLASS A NOTICE

This Class A digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

CLASSE A AVIS

Cet appareil numérique de la classeA respecte toutes les

exigences du Règlement sur le matériel brouilleur du

Canada.

ROLAND DG CORPORATION

1-6-4 Shinmiyakoda, Hamamatsu-shi, Shizuoka-ken, JAPAN 431-2103

MODEL NAME : See the MODEL given on the rating plate.

RELEVANT DIRECTIVE : EC LOW VOLTAGE DIRECTIVE (73/23/EEC)

EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE (89/336/EEC)

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

NOTICE Grounding Instructions

Do not modify the plug provided - if it will not fit the outlet,

have the proper outlet installed by a qualified electrician.

Check with qualified electrician or service personnel if the

grounding instructions are not completely understood, or if in

doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong

grounding plugs and 3-pole receptacles that accept the tool’s

plug.

Repair or replace damaged or worn out cord immediately.

Operating Instructions

KEEP WORK AREA CLEAN. Cluttered areas and benches

invites accidents.

DON’T USE IN DANGEROUS ENVIRONMENT. Don’t

use power tools in damp or wet locations, or expose them to

rain. Keep work area well lighted.

DISCONNECT TOOLS before servicing; when changing

accessories, such as blades, bits, cutters, and like.

REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure the switch is in off position before plugging in.

USE RECOMMENDED ACCESSORIES. Consult the

owner’s manual for recommended accessories. The use of

improper accessories may cause risk of injury to persons.

NEVER LEAVE TOOL RUNNING UNATTENDED.

TURN POWER OFF. Don’t leave tool until it comes to a

complete stop.

Contents

Features of the SC-545EX............................................................................4

To Ensure Safe Use......................................................................................5

Pour utiliser en toute sécurité.....................................................................9

Chapter 1: Getting Started........................................................................15

1-1 Checking Accessories ..................................................................................................................16

1-2 Part Names ..................................................................................................................................17

1-3 Assembling and Installing.............................................................................................................20

Installation Environment .......................................................................................................................................... 20

Step 1: Assemble the Stand ...................................................................................................................................... 21

Step 2: Install the Included Items............................................................................................................................. 23

Step 3: Install the Drain Bottle................................................................................................................................. 24

Step 4: Remove the Protective Media...................................................................................................................... 26

1-4 Connecting the Cables.................................................................................................................27

Connecting the Power Cord ..................................................................................................................................... 27

Connecting to the Computer .................................................................................................................................... 28

1-5 Switching On the Power for the First Time ..................................................................................30

Step 1: Install Ink Cartridges.................................................................................................................................... 30

Step 2 : Match the Machine to the Environment Where Installed .......................................................................... 32

1-6 Installing the Blade.......................................................................................................................33

Installing a Blade ...................................................................................................................................................... 33

Removing a Blade .................................................................................................................................................... 35

Chapter 2: Basic Operation.......................................................................37

2-1 Examples of Operations with This Machine.................................................................................38

2-2 Switching the Power On and Off ..................................................................................................39

Switching On the Power........................................................................................................................................... 39

Switching Off the Power at the End of the Day ...................................................................................................... 40

2-3 Loading Media..............................................................................................................................41

Loading Roll Media.................................................................................................................................................. 41

Loading Sheet Media................................................................................................................................................ 45

When Loading Thick Media (Only When Printing) ................................................................................................ 46

When Loading Media That Warps Easily (Only When Printing) ........................................................................... 47

Separating the Media ................................................................................................................................................ 48

Removing the Media ................................................................................................................................................ 48

2-4 Printing .........................................................................................................................................49

To Perform Printing .................................................................................................................................................. 49

Performing a Printing Test ....................................................................................................................................... 50

Downloading Printing Data...................................................................................................................................... 50

2-5 Cutting ..........................................................................................................................................51

To Perform Cutting ................................................................................................................................................... 51

Test Cutting............................................................................................................................................................... 52

Downloading Cutting Data....................................................................................................................................... 53

2-6 Printing and Cutting......................................................................................................................54

Sequence of Operation for Printing and Cutting ..................................................................................................... 54

Contents

2-7 Reloading the Media and Performing Cutting..............................................................................55

Printing Area ............................................................................................................................................................. 55

Printing with Crop Marks......................................................................................................................................... 56

Aligning Automatically ............................................................................................................................................ 56

Aligning Manually.................................................................................................................................................... 58

Chapter 3: Using the Print Heater.............................................................59

3-1 Switching the Print Heater On and Off.........................................................................................60

Switching On the Print Heater ................................................................................................................................. 60

Switching Off the Print Heater................................................................................................................................. 60

3-2 Loading Media..............................................................................................................................61

About the Ambient Temperature During Print Heater Use ..................................................................................... 61

Points to Observe When Loading Media ................................................................................................................. 61

3-3 Printing and Cutting......................................................................................................................62

Printing...................................................................................................................................................................... 62

Cutting/Printing and Cutting .................................................................................................................................... 63

Chapter 4: A Wide Variety of Operations..................................................65

4-1 Replacing the Ink Cartridges........................................................................................................66

Care and Handling of Ink Cartridges ....................................................................................................................... 66

Replacing with New Ink Cartridges ......................................................................................................................... 67

If Ink Runs Out During Printing .............................................................................................................................. 68

4-2 Checking the Remaining Ink Level ..............................................................................................69

4-3 Setting the Location Where Printing Starts..................................................................................70

Setting the Start Location ......................................................................................................................................... 70

4-4 Setting the Margins ......................................................................................................................72

Setting the Margins in the Feed Direction ............................................................................................................... 72

4-5 Making Corrections for Printing....................................................................................................73

Feed Correction ........................................................................................................................................................ 73

Bidirectional Correction ........................................................................................................................................... 74

Environment Matching ............................................................................................................................................. 76

4-6 Making Corrections for Printing and Cutting ................................................................................77

Adjusting Automatically........................................................................................................................................... 77

Adjusting Manually .................................................................................................................................................. 78

4-7 Stopping Printing or Cutting Operations ......................................................................................80

Stopping Printing or Cutting Operations ................................................................................................................. 80

Pausing Printing or Cutting Operations ................................................................................................................... 80

4-8 Recording the Amount of Remaining Media ................................................................................81

Displaying the Amount of Remaining Media on the Screen................................................................................... 81

4-9 When Not in Use for a Prolonged Period.....................................................................................82

Chapter 5: Maintenance.............................................................................83

5-1 Cleaning the Print heads..............................................................................................................84

Cleaning the Print heads........................................................................................................................................... 84

If Drop-out Persists Even After Carrying Out Cleaning Several Times ................................................................. 85

If Performing POWERFUL Cleaning Several Times Does Not Correct the Drop-out Problem ........................... 85

5-2 Cleaning Using the Cleaning Kit ..................................................................................................86

5-3 Replacing the Wiper.....................................................................................................................89

5-4 Other Cleaning Tasks ...................................................................................................................90

Contents

SOLJETTM and ECO-SOL INKTM are trademarks of Roland DG Corporation.

Other company names and product name are trademarks or registered trademarks of their respective holders.

5-5 Disposing of Discharged Ink ........................................................................................................91

5-6 How to Replace the Blade............................................................................................................92

5-7 How to Replace the Separating Knife ..........................................................................................93

5-8 When Moving the Unit..................................................................................................................94

Procedures from Preparing to Move Through Reinstalling .................................................................................... 94

Chapter 6: Menus and Keys ......................................................................97

6-1 Menus Flowchart..........................................................................................................................98

6-2 Description of Menus .................................................................................................................104

6-3 Description of Keys ....................................................................................................................108

Chapter 7: What to Do If... ....................................................................... 111

7-1 What to Do If... ........................................................................................................................... 112

The Machine Doesn't Run ...................................................................................................................................... 112

Clean, Attractive Printing Is Impossible ................................................................................................................ 113

Media Wrinkles or Warps ....................................................................................................................................... 115

The Media Becomes Jammed................................................................................................................................. 116

What to Do If the Print-head Carriage Does Not Operate .................................................................................... 117

7-2 What to Do If an Error Message Appears .................................................................................. 119

Chapter 8: Specifications ........................................................................123

8-1 Media Conditions .......................................................................................................................124

Usable Media .......................................................................................................................................................... 124

Acceptable Media Width ........................................................................................................................................ 125

8-2 About the Printing or Cutting Area..............................................................................................126

8-3 The Media-cutoff Location During Continuous Printing .............................................................127

8-4 About Blade Life .........................................................................................................................128

8-5 Locations of the Power Rating and Serial Number Labels ........................................................129

8-6 Specifications .............................................................................................................................130

Features of the SC-545EX

What Is the SC-545EX?

The SC-545EX is a large-format printer equipped with a cutting feature and combining high speed with high print

quality. Not only can it be used either solely for printing or solely for cutting, but it can also perform printing and cutting

simultaneously. Also, using the crop-mark feature lets you remove media after printing, then load it again and perform

cutting, positioning it accurately. It also achieves better weatherability through the use of ECO-SOL INK.

Built-in Print Server

This machine has a built-in print server (Roland-PrintServer) as a network interface. When you use the print server, you

can send printing data to the machine from anywhere on the network.

Built-in Print Heater

This machine has a built-in print heater to improve ink adhesion and speed up drying. This enhances productivity by

enabling support for more types of media.

Includes a Software Raster Image Processor (RIP)

Software RIP, which is included with the machine, lets you use your computer to perform raster image processing for

printing data such as PostScript files exported from a program and output the data to the machine.

To Ensure Safe Use

Used for instructions intended to alert the user to the risk of death or severe

injury should the unit be used improperly.

Used for instructions intended to alert the user to the risk of injury or media

damage should the unit be used improperly.

* Media damage refers to damage or other adverse effects caused with

respect to the home and all its furnishings, as well to domestic animals or

pets.

The symbol alerts the user to important instructions or warnings. The specific

meaning of the symbol is determined by the design contained within the triangle.

The symbol at left means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbid-

den). The specific thing that must not be done is indicated by the design contained

within the circle. The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specific thing

that must be done is indicated by the design contained within the circle. The symbol

at left means the power-cord plug must be unplugged from the outlet.

About the Symbols

Do not disassemble, repair, or modify.

Doing so may lead to fire or abnormal op-

eration resulting in injury.

Do not use while in an abnormal state

(i.e., emitting smoke, burning odor,

unusual noise, or the like).

Doingso may resultin fire or electrical shock.

Immediately switch off first the sub power,

then the main power, unplug the power cord

from the electrical outlet, and contact your

authorized Roland DG Corp. dealer or ser-

vice center.

About and Notices

Do not operate in a location exposed

to open flame, sparking, or static

electricity, or in a location exposed

to high temperatures, such as in the

immediate vicinity of a heater. Also,

do not place undried media in such

locations.

Doing so may result in fire due to

combustion of ink or cleaning liquid.

Do not store ink cartridges, cleaning

liquid, or discharged ink in locations

such as the following.

• Near open flame

• Locations exposed to high

temperatures, such as in the

immediate vicinity of a heater

• Near bleach, chemicals,

explosives, or the like

Doing so may cause fire.

Do not place any potentially flam-

mable object on the platen while the

print heater is in operation.

Doing so may cause fire.

Do not spill combustible liquid over

the platen.

Doing so may cause fire.

To Ensure Safe Use

Ground the unit with the ground wire.

Failure to do so may result in risk of electri-

cal shock in the even of a mechanical prob-

lem.

Do not use with any electrical power

supply that does not meet the ratings

displayed on the unit.

Use with any other power supply may lead

to fire or electrocution.

Use only with the power cord included

with this product.

Use with other than the included power cord

may lead to fire or electrocution.

Do not connect the power cord with

other electrical loads on a single elec-

trical outlet.

Doing so may generate heat and cause fire.

Do not use with a damaged power

cord or plug, or with a loose electri-

cal outlet.

Use with any other power supply may lead

to fire or electrocution.

Do not damage or modify the electri-

cal power cord, subject it to exces-

sive bending, twisting, pulling, bind-

ing, or pinching, or place any object

or weight on it.

Doing so may damage the electrical power

cord, leading to fire, electrical shock, or elec-

trocution.

Do not attempt to unplug the power-

cord plug with wet hands.

Doing so may result in electrical shock or

electrocution.

When unplugging the electrical power

cord from the power outlet, grasp the

plug, not the cord.

Unplugging by pulling the cord may damage

it, leading to fire, electrical shock, or electro-

cution.

Do not allow liquids, metal objects or

flammables inside the machine.

Such medias can cause fire.

Store ink cartridges out of the reach

of children.

When storing discharged ink

temporarily, place in the included

drain bottle or a durable sealed

container such as a metal can and

polyethylene tank, and cap tightly.

Leakage of discharged ink or its vapor may

result in odor, physical distress, or fire.

Ensure adequate ventilation for the

work area.

Failure to do so may result in odor, physical

distress, or fire.

Do not allow ink or cleaning liquid to

come into contact with eyes or skin.

Do not drink or deliberately smell ink

or cleaning liquid.

Doing so may be hazardous to your health.

If ink or cleaning liquid comes in

contact with the eyes, immediately

flush with running water for at least

15 minutes. If eye irritation

continues, seek treatment by a

physician.

If ink or cleaning liquid comes in

contact with the skin, immediately

wash well with soap and water. If

irritation or inflammation occur,

seek treatment by a physician.

If ink or cleaning liquid is

accidentally swallowed, do not

induce vomiting, and immediately

seek treatment by a physician.

If the odor of the ink or cleaning

liquid causes physical distress,

move to a well-ventilated location

and rest quietly. If dizziness or

nausea persists, seek treatment by a

physician.

Be sure to install the shafts when

loading roll media.

Otherwise the roll may fall and cause injury.

Release the caster locks for the stand

before attempting to move.

Otherwise the

unit may tip

overand cause

injury.

Do not touch the control panel while

head cleaning or other cleaning is in

progress.

Theprint-headcarriage may move andcause

injury.

To Ensure Safe Use

Use care to avoid pinching the fingers

when placing the unit on the stand.

Doing so may

result in injury.

Use the joining screws to secure the

unit to the stand.

Failure to do so

may result in

falling of the unit,

leading to injury.

Install in a level and stable location.

Failure to do so may result in the unit tipping

over, leading to injury.

Unpacking, and installation must be

carried out by four or more persons.

Otherwise the machine or the stand may fall,

resulting in injury.

Before switching on the power, be

sure to install the drain bottle.

Otherwisedischarged fluid mayleak from the

machine.

Do not place hands within the space

to the front of the unit while in opera-

tion.

Doing so may

result in injury.

Do not touch the tip of the blade with

your fingers.

Doing so may result in injury, and the cutting

performance of the blade will be impaired.

Do not touch the platen when the print

heater is operating.

Doing so may cause burns because the

platen is hot.

Do not touch the tip of the separating

knife with your

fingers.

Doing so may re-

sult in injury.

Load roll media at the proper position.

Otherwise the roll may fall, resulting in in-

jury.

Be sure to use the media with a width

of 500 mm (19-11/16 in.) or more.

Failure to do so may cause overheating of

the print heater, leading to fire.

Do not press the [SEL] key.

Doing so may cause malfunction of the print

heater, leading to fire.

When cleaning the unit, be sure to

wait approximately 30 minutes or

more after switching off the power

until the temperature of the platen

falls sufficiently.

Doing so may cause burns because the

platen is hot.

To Ensure Safe Use

About the Labels Affixed to the Unit

These labels are affixed to the body of this product.

The following figure describes the location and content of these messages.

In addition to the and symbols, the symbols shown below are also used

: Indicates information to prevent machine breakdown or malfunction and ensure correct use.

: Indicates a handy tip or advice regarding use.

Do not place hands within the

space to the front of the unit

while in operation.

Ink cartridge

Inside the front cover

Front

Ink and discharged ink are flammable.

Keep away from open flame.

Ink and discharged ink are toxic.

Avoid contact with the body. Use only

in a well-ventilated area.

Rear

Do not touch the platen. It is hot when

the print heater is operating.

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland Metaza MPX-90 Bedienungsanleitung

Roland

Roland SolJet Pro II SJ-1000 Bedienungsanleitung

Roland

Roland Versa UV LEF-12 Bedienungsanleitung

Roland

Roland ColorCAMM PNC-5000 Bedienungsanleitung

Roland

Roland VersaStudio BR-20 Gebrauchs- und Pflegehandbuch

Roland

Roland DU2-64 Bedienungsanleitung

Roland

Roland CJ-540 Bedienungsanleitung

Roland

Roland TrueVIS MG-640 Bedienungsanleitung

Roland

Roland VersaUV LEF2-200 Bedienungs- und Wartungshandbuch

Roland

Roland XC-540MT Bedienungsanleitung

Roland

Roland VersaUV LEF2-300 Betriebsanleitung

Roland

Roland LEC-300A Bedienungsanleitung

Roland

Roland VersaStudio BN-20 Bedienungsanleitung

Roland

Roland EGX-600 Bedienungsanleitung

Roland

Roland Metaza MPX-90M Bedienungsanleitung

Roland

Roland XC-540W Bedienungsanleitung

Roland

Roland SP-540i Bedienungsanleitung

Roland

Roland VS-640i Betriebsanleitung

Roland

Roland CAMM-2 PNC-2300 Stücklistenhandbuch

Roland

Roland VersaCamm SP-300V Bedienungsanleitung

Roland

Roland METAZA MPX-70 Bedienungsanleitung

Roland

Roland VersaStudio BT-12 Bedienungsanleitung

Roland

Roland VersaUV LEC2-300 Bedienungsanleitung

Roland

Roland ColorCAMM PRO PC-600 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung