Roland VS-640 Bedienungsanleitung

Setup Guide

Read this rst.

This describes the setup tasks and important conditions about the

installation location that must be met in order to enable use of this

machine.

Thank you very much for purchasing this product.

To ensure correct and safe usage with a full understanding of this product's performance, please be

sure to read through this manual completely and store it in a safe location.

 Unauthorized copying or transferal of this manual, in whole or in part, is prohibited.

 The contents of this document and the specications of this product are subject to change without

notice.

 The documentation and the product have been prepared and tested as much as possible. If you nd

any misprint or error, please inform us.

 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur

through use of this product, regardless of any failure to perform on the part of this product.

 Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur

with respect to any article made using this product.

Contents

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com/

Contents........................................................................................................1

To Ensure Safe Use........................................................................................2

Pour utiliser en toute sécurité ......................................................................9

Setup Guide........................................................................................................17

1. Installation Environment..........................................................................18

Deciding On an Installation Site ...............................................................................................18

Temperature and Humidity ........................................................................................................19

Installation Space ...........................................................................................................................19

2. Included Items.........................................................................................20

3. Assembling and Installing........................................................................22

Step 1: Assembling the Stand – Mounting the Machine .................................................22

Step 2: Installing the Media Holder..........................................................................................25

Step 3: Installing the Drain Bottle.............................................................................................27

Step 4: Removing the Packing Materials................................................................................28

4. Connect the Cables.................................................................................29

Connecting the Cables.................................................................................................................29

5. Installing the Ink Cartridges.....................................................................30

Filling with Ink for the First Time...............................................................................................30

Axing the Cartridge-slot Labels.............................................................................................30

Installing the Ink Cartridges .......................................................................................................31

6. Installing the Blade..................................................................................39

7. Network Settings .....................................................................................41

Introduction .....................................................................................................................................41

Step 1: Make the Network Settings for the Computer......................................................41

Step 2: Make the Network Settings on the Printer.............................................................43

Step 3: Make the Port Settings for the Software RIP..........................................................45

8. When Not in Use for a Prolonged Period ................................................46

Keep Performing Maintenance .................................................................................................46

Alarm Feature ..................................................................................................................................46

9. When Transferring the Unit .....................................................................47

Procedures from Preparing for Transfer Through Reinstalling the machine.............47

This document is the setup guide for four models: VS-640/540/420/300. This document uses the following

notation to distinguish between the four models where necessary.

VS-640 — 64-inch model

VS-540 — 54-inch model

VS-420 — 42-inch model

VS-300 — 30-inch model

Also, most of the gures in this document depict the VS-640

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property. Points

which must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING Used for instructions intended to alert the user to the risk of death or

severe injury should the unit be used improperly.

CAUTION

Used for instructions intended to alert the user to the risk of injury or

material damage should the unit be used improperly.

Note: Material damage refers to damage or other adverse eects caused

with respect to the home and all its furnishings, as well to domestic

animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings.

The specic meaning of the symbol is determined by the design contained within the

triangle.

The symbol at left means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden).

The specic thing that must not be done is indicated by the design contained within the

circle.

The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out.

The specic thing that must be done is indicated by the design contained within the

circle.

The symbol at left means the power-cord plug must be unplugged from the outlet.

To Ensure Safe Use

Incorrect operation may cause injury.

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may lead to an

accident.

Keep children away from the machine.

The machine includes areas and compo-

nents that pose a hazard to children and

may result in injury, blindness, choking, or

other serious accidents.

Never operate the machine while tired

or after ingesting alcohol or any medi-

cation.

Operation requires unimpaired judgment.

Impaired judgment may result in an ac-

cident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that ex-

ceeds its capacity.

Doing so may result in injury or re.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with

this machine.

Incompatible items may lead to an ac-

cident.

Before attempting cleaning, mainte-

nance, or attachment or detachment of

optional items, disconnect the power

cord.

Attempting such operations while the ma-

chine is connected to a power source may

result in injury or electrical shock.

WARNING

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in re, electrical shock,

or injury. Entrust repairs to a trained service

technician.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertent contact with certain areas may

cause the hand or ngers to be pinched or

become caught.

Use care when performing operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the ma-

chine, resulting in injury.

Conduct operations in a clean, brightly

lit location.

Working in a location that is dark or cluttered

may lead to an accident, such as becoming

caught in the machine as the result of an

inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support a per-

son. Climbing or leaning on the machine

may dislodge components and cause a slip

or fall, resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To avoid

injury, handle the tool with care.

To Ensure Safe Use

WARNING

Connect to an electrical outlet that com-

plies with this machine's ratings (for

voltage, frequency, and current).

Incorrect voltage or insufcient current may

cause re or electrical shock.

Never use out of doors or in any loca-

tion where exposure to water or high

humidity may occur. Never touch with

wet hands.

Doing so may result in fire or electrical

shock.

Never allow any foreign object to get

inside. Never expose to liquid spills.

Inserting objects such as coins or matches

or allowing beverages to be spilled into the

ventilation ports may result in re or electrical

shock. If anything gets inside, immediately

disconnect the power cord and contact your

authorized Roland DG Corp. dealer.

Danger of electrical short, shock, electrocution, or re

WARNING

Never place any ammable object nearby.

Never use a combustible aerosol spray

nearby. Never use in any location where

gases can accumulate.

Combustion or explosion may be a dan-

ger.

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in re

or electrical shock.

When using an extension cord or power

strip, use one that adequately satises

the machine's ratings (for voltage, fre-

quency, and current).

Use of multiple electrical loads on a single

electrical outlet or of a lengthy extension

cord may cause re.

Connect to ground.

This can prevent re or electrical shock due

to current leakage in the event of malfunc-

tion.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency. In-

stall the machine next to an electrical outlet.

Also, provide enough empty space to allow

immediate access to the electrical outlet.

If sparking, smoke, burning odor, unusual

sound, or abnormal operation occurs, im-

mediately unplug the power cord. Never

use if any component is damaged.

Continuing to use the machine may result in

re, electrical shock, or injury. Contact your

authorized Roland DG Corp. dealer.

Ratings

Side view of

the machine

To Ensure Safe Use

Important notes about the power cord, plug, and electrical outlet

Never place any object on top or subject to

damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle, bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause re.

To Ensure Safe Use

Ink, cleaning uid, and discharged uid are ammable and toxic.

In the event of ingestion or physical distress

 In the event of contact with the eyes, immediately ush with water for at least 15 minutes. If

eye irritation continues, seek treatment by a physician.

 In the event of contact with skin, immediately wash with soap. If irritation or inammation

occur, seek treatment by a physician.

 In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physi-

cian. Forcibly inducing vomiting may lead to danger of choking.

 If odor leads to physical distress, move to a well-ventilated location and rest quietly. If diz-

ziness or nausea persists, seek treatment by a physician.

WARNING

Keep open ame away from the work

area.

Ink and discharged uid are ammable.

Never store ink, cleaning uid, or dis-

charged fluid in any of the following

locations.

Any location exposed to open ame.

Any location where high temperature

may occur.

Near bleach or any other such oxidizing

agent or explosive material.

Any location within the reach of children

Fire may be a danger. Accidental ingestion

by children may pose a health hazard.

Never place an ink cartridge in re.

Ink may ow out, catch re, and spread re

to other nearby objects.

Never drink or sniff ink, cleaning uid, or

discharged uid, or allow them to come

in contact with the eyes or skin.

Doing so may be hazardous to the health.

CAUTION

Ensure adequate ventilation for the work

area.

Failing to perform ventilation may result in a

health hazard or danger of combustion due

to ink fumes.

Never allow an ink cartridge to be sub-

jected to impact, and never attempt to

disassemble.

Ink may leak.

To Ensure Safe Use

This machine weighs 200 kg (441 lb.). Media weighs 40 kg (88 lb.).

Danger of re, burns, or toxic gas emissions

WARNING

Caution: high temperatures

Areas such as the dryer become hot. Exer-

cise caution to avoid re or burns.

When printing is not being performed,

remove any loaded media or switch off

the power.

The continued application of heat at a

single location may cause the release of

toxic gases from the media or pose a re

hazard.

WARNING

Never use media that cannot withstand

heat.

Doing so may degrade the media, or may

result in re or the release of toxic gases.

WARNING

Install the machine in a location that is

level, stable, and able to bear the weight

of the machine.

The total weight may reach over 200 kg

(441lb.) for the 64-inch model, 170kg (375lb.)

for the 54-inch model, 150 kg (331lb.) for the

42-inch model, and 130 kg (287lb.) for the

30-inch model). Installation in an unsuitable

location may cause a major accident, includ-

ing tip over, fall, or collapse.

Unloading and emplacement are opera-

tions that must be performed by 6 per-

sons or more (by 4 persons or more for

the 30-inch model).

Tasks that require undue effort when per-

formed by a small number of persons may

result in physical injury. Also, if dropped,

such items may cause injury.

WARNING

Be sure to lock the stand's casters.

If the machine should begin to topple, a ma-

jor accident may result, including crushing

of the appendages or the body.

When storing roll media, implement

adequate safety measures to ensure

that the stored media will not roll, fall,

or topple over.

Danger exists of becoming pinned under the

media and suffering serious injury.

Handling roll media is an operation that

must be performed by two persons or

more, and care must be taken to prevent

falls.

Attempting to lift heavy media in a manner

that taxes your strength may cause physi-

cal injury.

To Ensure Safe Use

Warning labels are afxed to make areas of danger immediately clear. The meanings of these labels

are as follows. Be sure to heed their warnings. Also, never remove the labels or allow them to become

obscured.

Warning Labels

Caution: Pinching Hazard

Be careful not to allow the ngers

to become pinched when loading

media or closing covers.

Caution: High Voltage

Cover removal may pose hazard of

shock or electrocution due to high

voltage.

Caution: Moving Print Heads

The print heads inside the cover

move at high speed and pose a

hazard. Never insert the hand or

ngers into the gap.

Flammable

Ink and discharged uid are am-

mable. Keep away from open

ame.

Ink Is Toxic

Ink and discharged uid are toxic.

Avoid contact with the body. Use

only in a wellventilated area.

Caution: High Temperature

The platen and dryer become hot.

Exercise caution to avoid re or

burns.

Ink Is Toxic

Ink and discharged uid are toxic.

Avoid contact with the body. Use

only in a well ventilated area.

Flammable

Ink and discharged uid are ammable.

Keep away from open ame.

Andere Handbücher für VS-640

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Drucker Handbücher

Roland

Roland VersaUV LEF-20 Gebrauchs- und Pflegehandbuch

Roland

Roland SOLJET PROIII XC-540 Bedienungsanleitung

Roland

Roland PR-1111 Bedienungsanleitung

Roland

Roland SP-300 Bedienungsanleitung

Roland

Roland Metaza MPX-90 Bedienungsanleitung

Roland

Roland VersaUV LEC2-640 Betriebsanleitung

Roland

Roland CAMM-1 PNC-950 Bedienungsanleitung

Roland

Roland EGX-600 Bedienungs- und Wartungshandbuch

Roland

Roland Raven PR-2417 Bedienungsanleitung

Roland

Roland VersaCAMM ECO-SOL MAX3 Bedienungsanleitung

Roland

Roland SP-540i Bedienungsanleitung

Roland

Roland IU-1000F Bedienungsanleitung

Roland

Roland VersaUV LEJ-640 Bedienungs- und Wartungshandbuch

Roland

Roland VersaUV LEC2-300 Bedienungsanleitung

Roland

Roland TrueVIS MG-640 Bedienungsanleitung

Roland

Roland VersaUV LEF2-300 Betriebsanleitung

Roland

Roland SOLJET PRO4 XF-640 Bedienungsanleitung

Roland

Roland SOLJET Pro III XC-540 Bedienungs- und Wartungshandbuch

Roland

Roland Advanced Jet AJ-1000 Bedienungs- und Wartungshandbuch

Roland

Roland SOLJET Pro 4 XF-640 Bedienungsanleitung

Roland

Roland VersaStudio BR-20 Gebrauchs- und Pflegehandbuch

Roland

Roland LEC-300A Bedienungsanleitung

Roland

Roland SP-540i Bedienungsanleitung

Roland

Roland ColorCamm PC-12 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung