Roland 417741A Bedienungsanleitung

Owner’s Manual

Check the contents of the package

The R-07 comes with the following items. As soon as you open the package, please check that all these items are present.

If anything is missing, please contact your dealer.

*R-07 recorder

*microSD card

This is inserted in the R-07 itself. A memory card is required in order

to carry out recording and playback with the R-07.

*Batteries (Alkaline battery (AA, LR6) x2)

*Owner’s manual

This is the document you’re reading. Keep it available for reference

when needed.

*Leaet“USING THE UNIT SAFELY”

Before using this unit, carefully read the leaet. After reading, keep

the document(s) where it will be available for immediate reference.

PDF Manual (download from the Web)

• Reference guide

This explains all functions of the unit.

To obtain the PDF manual

1. Enter the following URL in your computer.

http://www.roland.com/manuals/

2. Choose“R-07” as the product name.

*This document explains the specications of the product at the time

that the document was issued. For the latest information, refer to

the Roland website.

Panel Descriptions

Display

This shows various types of information

for the R-07.

PEAK indicator

This will light when the input volume is

excessive.

Bluetooth indicator

This blinks when pairing with a Bluetooth

speaker or headphones (p. 10).

It is lit if the R-07 is connected to a

Bluetooth speaker or headphones, or when

the remote control is on (p. 16).

Built-in mics

This is a stereo mic built into the unit.

[SCENE] button

This button lets you switch scenes (p. 12)

that recall settings suitable for a specic

recording situation.

Long-press this button to ip the display

vertically.

[MENU] button

This button lets you make various settings

for the R-07, such as recording/playback

settings and specifying the date and time.

[REHEARSAL] button

This button automatically sets the

appropriate recording level.

[A B] button

This button lets you repeatedly play

between two points (the A–B region) of

a le. When you assign an “A”marker and

“B” marker in the le, playback will repeat

between the“A” and “B” markers. Pressing

the button the rst time assigns the“A”

marker, and pressing it a second time

assigns the“B”marker.

[MARK] button

For a WAV le, you can press this button

to add a mark at a desired location. If you

press this button at a marked location, the

mark is removed.

Remote indicator

Operation Status

Lit Recording

Blinking (slow) Record-standby

Blinking (fast) Input overload

Panel Descriptions

[] button

Press this button to move to the beginning

of the le, or to select the previous le. For

a WAV le that contains marks, this button

returns to the previous mark. By holding

down this button, you can rewind through

the le.

You can do this during playback or while

stopped.

This button also moves the cursor to the

left in the screen, or changes the value of

the selected item.

INPUT [+] [–] buttons

These buttons adjust the level of the audio

that’s being input via the built-in mics, the

MIC/AUX IN jack.

Pressing [+] will increase the input level.

Pressing [–] will decrease the input level.

[] button

This button stops playback or recording.

This button also moves the cursor

downward in the screen, or changes the

value of the selected item.

REC/PLAY indicator

Operation Status

Lit red Recording

Blinking red Record-stanby

Lit green Playing

Blinking green Play-stanby

[] button

Press this button to enter recording-

standby mode or to begin recording.

You’ll also use this button to conrm a

selection.

VOL [+] [–] buttons

These buttons adjust the volume that

is output from the built-in speaker, the

PHONES jack or the Bluetooth device.

[] button

Press this button to start playback, or to

pause playback or recording.

This button also moves the cursor upward

in the screen, or changes the value of the

selected item.

[] button

Press this button to select the next le. For

a WAV le that contains marks, this button

advances to the next mark. By holding

down this button, you can fast-forward

through the le.

You can do this during playback or while

stopped.

This button also moves the cursor to the

right in the screen, or changes the value of

the selected item.

Panel Descriptions

[POWER] switch

Slide this switch toward POWER to turn

the power on/o (p. 8). With the power

turned on, you can set this switch to the

right to enable the HOLD function

If you leave HOLD on, operation is disabled

for all buttons, preventing unintended

operation. Even if HOLD is on, you can still

operate the R-07 from a mobile device

(p. 16).

USB port

Use a commercially available USB cable to

connect this to your computer. This allows

les recorded on the R-07 to be transferred

to your computer, or WAV and MP3 les

from your computer to be copied to the

R-07 for playback.

* Do not use a micro USB cable that is

designed only for charging a device.

Charge-only cables cannot transmit

data.

PHONES jack

You can connect headphones here (p.

10).

MIC/AUX IN jack

Use this if you want to connect an external

mic, audio device or electronic musical

instrument.

Panel Descriptions

microSD card slot

Insert the microSD card into this slot. When

the R-07 is shipped from the factory, a

microSD card is inserted.

Built-in speaker

This is the R-07’s internal speaker.

Battery compartment

Install batteries here (p. 8).

Tripod mounting socket

This socket lets you attach the R-07 to a

commercially available camera tripod.

(The socket is threaded for a 1/4”screw.)

About microSD cards

*Some memory card types or memory cards from some manufacturers may not record or play back properly on the unit.

Strap hole

The strap can be passed through this hole.

Panel Descriptions

Main Screen

Here we’ll explain the principal icons and information shown in the main screen.

Playing / Stopped

Song name

Elapsed playback time

Output level

Play/stop status (PLAY/STOP)

Power supply status (USB /batteries )

Song length

Sampling rate of the song being played

Reverb status (ON /OFF)

Playback speed (ON /OFF)

Repeat status (ON /OFF)

Peak

Current time

Recording

Song name

Elapsed recording time

Input level

Record/recording-standby

status (REC/STANDBY)

Power supply status (USB /batteries )

Remaining recordable time on the memory card

Sampling rate during recording

Limiter/AGC status (ON /AGC /OFF)

Plug-in power status (ON /OFF) (Appears

only when external mic has been connected.)

Peak

Current time

Getting Ready

1. Turning the Power On/O

Types of batteries that can be used

• Alkaline battery (AA, LR6)

• Rechargeable Ni-MH battery (AA, HR6)

NOTE

The R-07 cannot rechargeable Ni-MH batteries. You’ll need

to use a battery charger designed for rechargeable Ni-MH

batteries.

1. Make sure that the power is o.

If the power is on, turn it o. Slide the R-07’s [POWER] switch toward

POWER to turn the power on/o.

2. Open the cover of the battery compartment located on

the bottom of the unit.

Turn the R-07 over, then slide the cover downward while pressing

the area circled in the illustration.

*When turning the unit over, be careful so as to protect the buttons

and knobs from damage. Also, handle the unit carefully; do not

drop it.

3. Install the batteries.

Install two AA batteries in the compartment, making sure that the

polarity (+/– orientation) is correct.

4. Close the cover of the battery compartment.

5. Slide the [POWER] switch toward POWER for several

seconds; the power will turn on.

When the power turns on, a screen like the following will appear in

the display. We’ll call this the “main screen.”

6. To turn the power o, slide the [POWER] switch once

again toward POWER for several seconds.

Getting Ready

Note when using the R-07 on batteries

• If you handle batteries improperly, you risk explosion and uid

leakage. Make sure that you carefully observe all of the items

related to batteries that are listed in“USING THE UNIT SAFELY” and

“IMPORTANT NOTES”(leaet“USING THE UNIT SAFELY).

• Do not mix fresh batteries with used batteries, and do not mix

batteries of dierent types.

• If you won’t be using the R-07 for an extended period of time, we

recommend that you remove the batteries to prevent them from

leaking electrolyte.

• If electrolyte should leak from the batteries, use a soft cloth to wipe

the battery compartment clean, and then install new batteries.

Electrolyte that contacts your skin might cause irritation. Electrolyte

that enters your eyes is dangerous; if this occurs, immediately ush

your eyes thoroughly with water.

• Do not carry or store batteries together with metallic objects such

as pens, necklaces, or hairpins.

Power conservation function

The power to this unit will be turned o automatically after a

predetermined amount of time has passed since it was last used for

playing music, or its buttons or controls were operated (Auto O

function).

If you do not want the power to be turned o automatically,

disengage the Auto O function. For details, refer to the reference

guide (PDF).

• Any settings that you are in the process of editing will be lost

when the power is turned o. If you have any settings that you

want to keep, you should save them beforehand.

• To restore power, turn the power on again (p. 8).

Remaining battery indication

• When the remaining battery power runs low, a battery low icon

appears in the upper right of the display. When this appears,

install fresh batteries as soon as possible. If you continue to use the

unit in this state, the display will indicate“Battery Low,” and nally

the R-07 will stop functioning entirely.

Battery life (when using alkaline batteries)

Continuous playback approximately 15 hours

Continuous recording approximately 15 hours

*The above battery lifespans are approximate. Battery life will vary

depending on environmental conditions and the method of use.

2. Specifying the Battery Type

1. Press [MENU] to access the “Menu” screen, use [ ]/[ ]

to select “Power Manage,” and press [ ].

2. Use [ ]/[ ] to move the cursor

to the Battery setting, and use

[]/[ ] to specify the type of

battery that you’re using.

3. Press [MENU] twice to return to

the main screen.

Getting Ready

3. Setting the Date andTime

After you turn on the power for the rst time, you’ll need to set the

internal clock as follows. The date and time you specify are used as

the time stamp for the les that are recorded.

1. Press [MENU] to access the “Menu” screen, use [ ]/[ ]

to select “Date & Time,”and press [ ].

NOTE

• The internal clock is powered by batteries. If the R-07 is left for

several hours with batteries removed, the internal clock will return

to its default state. When you turn on the power in this state, the

message“Clock Initialized” will appear.

• If the screen indicates“Clock Initialized,” you’ll need to reset the

date and time.

2. Set the date and time.

Use [ ]/[ ] to move the cursor left/

right.

When the cursor is at the position of the

character you want to change, use [ ]/[ ] to change the date and

time, and press [ ] to conrm the setting.

3. Press [MENU] to return to the main screen.

4. Using Headphones

The R-07 has a built-in speaker. You can listen to the playback

through this speaker, or you can connect headphones for listening.

You can also connect Bluetooth headphones to the R-07 and listen

wirelessly to the playback.

*To prevent malfunction and equipment failure, always turn

down the volume, and turn o all the units before making any

connections.

Connecting Bluetooth® Headphones

Supported codecs: SBC, Qualcomm® aptX™ audio,

Qualcomm®aptX™ Low Latency audio

Registering a Bluetooth device (Pairing)

“Pairing” is the procedure by which the mobile device that you want

to use is registered on this unit (the two devices recognize each

other).

Once a mobile device has been paired with this unit, there is no

need to perform pairing again. After the R-07 starts, it searches for

the previously-connected device, and connects automatically.

1. Place the Bluetooth device that you want to connect

near the R-07, power-on the device, and put it in pairing

mode.

For details, refer to the owner’s manual of your Bluetooth device.

2. Press [MENU] to access the “Menu” screen, use [ ]/[ ]

to select “Bluetooth,”and press [ ].

3. Use [ ]/[ ] to select “Pairing Audio” and press [ ].

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland Boutique A-01 Installationsanleitung

Roland

Roland CM-500 Bedienungsanleitung

Roland

Roland DJ-808 Bedienungsanleitung

Roland

Roland Boss GT-10 Bedienungs- und Wartungshandbuch

Roland

Roland Micro Composer MC-80EX Bedienungsanleitung

Roland

Roland AR-3000SD Bedienungsanleitung

Roland

Roland Realtime Arranger RA30 Bedienungsanleitung

Roland

Roland V-Drums TD-27 Bedienungsanleitung

Roland

Roland EXR-5 Kurzanleitung

Roland

Roland SD-35 Bedienungsanleitung

Roland

Roland MTLC-16 Leitfaden

Roland

Roland MT-32 Bedienungsanleitung

Roland

Roland VR-5 Bedienungsanleitung

Roland

Roland Boutique JU-06 Bedienungsanleitung

Roland

Roland CD-2i Bedienungsanleitung

Roland

Roland GK-3B Bedienungsanleitung

Roland

Roland EXR-5S Bedienungsanleitung

Roland

Roland Micro Composer MC-80 Bedienungs- und Wartungshandbuch

Roland

Roland AR-3000SD Bedienungsanleitung

Roland

Roland CD-2 Bedienungsanleitung

Roland

Roland VP-70 Bedienungsanleitung

Roland

Roland TR-08 Bedienungsanleitung

Roland

Roland MicroComposer MC-4 Bedienungsanleitung

Roland

Roland Edirol R-44 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch