Roland Boutique A-01 Installationsanleitung

Roland Boutique A-01 FAQ

Q&A

I cannot transmit the data using a micro USB cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

When entering a pattern into the A-01, pressing the [1]–[4] buttons sometimes does not turn steps on/o. . . . . . . . . . . . 2

When I operate a control change that’s assigned to a controller of the A-01, the sound of the internal synth also changes. 2

How do I use the Bluetooth function of the A-01? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Can I make a backup of the A-01’s patches, tones, patterns, and system settings? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

When using the A-01 with a computer, must I install the USB driver? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Can power be supplied to the A-01 from a source other than batteries?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

What types of device can the A-01 be connected to via Bluetooth? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

The pitch of the A-01’s internal synth is slightly wrong; can I adjust it? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

I want to use multiple A-01 units via Bluetooth, but their names are identical so I can’t distinguish them. . . . . . . . . . . . . . 4

I can’t synchronize the A-01 with an external device and start/stop the step sequencer. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

A device connected to the A-01’s CV/GATE jacks sometimes fails to sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Can I enter notes into the step sequencer without using the A-01’s keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

I’d like more details about the MIDI messages that the A-01 can transmit and receive.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

I’d like assign SysEx to the A-01’s controllers, but I don’t know how to specify SysEx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

I’d like to know about the MIDI signal ow within the A-01. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Can the MIDI channel of the keyboard (K-25m) be changed from the A-01?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Roland Boutique A-01 FAQ

Q. I cannot transmit the data using a micro USB cable.

Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.

Q. When entering a pattern into the A-01, pressing the [1]–[4] buttons sometimes

does not turn steps on/o.

If you want to turn steps on/o by pressing the [1]–[4] buttons, pressing the button as quickly as possible will let you

turn steps on/o.

Q. When I operate a control change that’s assigned to a controller of the A-01, the

sound of the internal synth also changes.

You can use control changes to control the sound of the internal synth.

(For details, refer to the A-01 Supplementary Manual.)

If you don’t want to control the internal synth, use the PATCH parameter“Synth Ctrl Src” to change the MIDI channel

of the internal synth.

Q. How do I use the Bluetooth function of the A-01?

Here’s how to use the Bluetooth function of the A-01.

* As an example, here’s how to make settings for the iPad.

1. In the A-01’s system setting screen, turn“Bluetooth LE”on.

2. On the mobile device that you want to connect, turn o Bluetooth pairing.

* If the device eld of your Bluetooth device does not indicate “Connected”beside the A-01’s device name, it has not

been paired, so this step is not necessary. Proceed to the next step.

* If you don’t know how to turn o Bluetooth pairing for your mobile device, refer to the source of support for your

device.

3. Temporarily turn o the Bluetooth function of your mobile device.

* If you don’t know how to turn o the Bluetooth function for your mobile device, refer to the source of support for

your device.

4. Turn on the Bluetooth function of your mobile device.

NOTE

In this screen, you should only turn on the Bluetooth function of your mobile device.

If you accidentally paired the A-01 by tapping its device name, the Bluetooth function might not work correctly; in

this case, make the settings again starting with step 2 where you turn o pairing.

5. Start the app whose MIDI function you want to use; then in the settings of the app, open “Bluetooth MIDI Device.”

6. When the A-01’s device name is detected, tap the device name.

* The name might dier depending on the app you’re using.

7. The “Request Bluetooth Pairing” screen appears; tap the pairing.

These settings let you control music apps from the A-01 via Bluetooth.

* The next time you use your system, you simply need to turn Bluetooth on and perform step 5. If the connection is

not successful, repeat the settings from step 1.

* Some delay might occur when playing MIDI via Bluetooth.

Roland Boutique A-01 FAQ

Q. Can I make a backup of the A-01’s patches, tones, patterns, and system settings?

You can use bulk dump to save these settings to an external device as MIDI data.

* In order to save or load a bulk dump, you’ll need an app that can record and play back MIDI (system exclusive

messages).

Saving

1. Connect the A-01 via USB (or a MIDI cable) to your PC or Mac on which you are running an app that is able to

record and play back MIDI.

2. Make settings in your app so that it can use the A-01’s MIDI.

3. Set your app in record mode.

4. In the A-01’s CONTROLLER mode, press the [MENU] button to access“Select Menu”; then select System and press

the [INC] button.

5. Use the cursor up/down [H] [I] buttons to select Bulk Dump, and then press the [INC] button.

6. Press the [MENU] button to exit the System setting screen. (The setting is remembered.)

7. Press the [4] button to output the bulk dump.

8. When the A-01 indicates “Completed,” the process is completed. Press the [DEC] button to exit the screen.

9. Stop recording on your app, and save the data.

1. Connect the A-01 via USB (or a MIDI cable) to your PC or Mac on which you are running an app that is able to

record and play back MIDI.

2. Make settings in your app so that it can use the A-01’s MIDI.

3. In your app, play back the saved data.

4. The A-01 successively indicates “Receiving bulkdump...” and then “Writing to memory...”

5. When the A-01 indicates “Writing completed,” the process is completed.

* When loading from Bluetooth MIDI, loading will fail if the saved system parameter “Bluetooth LE Name” is dierent

than the current setting. In this case, load the data via USB or the MIDI connector.

Q. When using the A-01 with a computer, must I install the USB driver?

A driver is not necessary when connecting the A-01 via USB.

You can simply connect it to your PC or Mac and use it as a MIDI device.

Q. Can power be supplied to the A-01 from a source other than batteries?

When the A-01 is connected via USB to a PC or Mac, power is supplied via USB.

* When the A-01 is connected via USB, the Auto O function does not operate.

Roland Boutique A-01 FAQ

Q. What types of device can the A-01 be connected to via Bluetooth?

The A-01 can be connected to an iOS device (iPhone or iPad) or Mac that supports Bluetooth 4.X (Bluetooth(R) Smart,

Bluetooth LE).

* On iOS devices, it might not be possible to use the A-01 with some apps.

Q. The pitch of the A-01’s internal synth is slightly wrong; can I adjust it?

In some cases, the pitch of the internal synth might have a slight range of error, but this is not a malfunction.

As necessary, use the System parameter “Master Tune” (-64–+63) to adjust the pitch.

Q. I want to use multiple A-01 units via Bluetooth, but their names are identical so I

can’t distinguish them.

You can distinguish their names by adding a number to the end of the A-01’s device name that is seen from

Bluetooth.

1. In the A-01’s CONTROLLER mode, press the [MENU] button to access“Select Menu”; then select “System” and

press the [INC] button.

2. Use the cursor up/down [H] [I] buttons to select “Bluetooth LE Name,” and select “1–9.”

The selected number is added to the end of the device name A-01.

3. Press the [MENU] button to exit the System setting screen. (The setting is remembered.)

Q. I can’t synchronize the A-01 with an external device and start/stop the step

sequencer.

If MIDI Clock is set to “Internal,” you can’t start/stop the step sequencer from an external MIDI device. Change the

system setting MIDI Clock to“Auto.”

1. In the A-01’s CONTROLLER mode, press the [MENU] button to access“Select Menu”; then select System and press

the [INC] button.

2. Use the cursor up/down [H] [I] buttons to select “MIDI Clock,” and set it to “Auto.”

3. Press the [MENU] button to exit the System setting screen. (The setting is remembered.)

Q. A device connected to the A-01’s CV/GATE jacks sometimes fails to sound.

The range of pitches that can be output from the CV jack is six octaves (0V–6V). Pitches outside this range cannot be

output.

The key that is specied as the System setting “CV Ref Note”will be 0V.

Set this to obtain the necessary range of pitches.

1. In the A-01’s CONTROLLER mode, press the [MENU] button to access“Select Menu”; then select System and press

the [INC] button.

2. Use the cursor up/down [H] [I] buttons to select “CV Ref Note,” and make the desired setting.

3. Press the [MENU] button to exit the System setting screen. (The setting is remembered.)

Roland Boutique A-01 FAQ

Q. Can I enter notes into the step sequencer without using the A-01’s keyboard.

When entering steps, you can specify notes by turning encoder [R1], but you can also specify notes by using ribbon

controller [C1].

The synth will also sound at this time, allowing you to specify notes for the steps while hearing the pitch.

* The notes that can be entered using ribbon controller [C1] will be the notes of the scale specied by the PATCH

parameter “Ribbon Control Note Scale.”

Q. I’d like more details about the MIDI messages that the A-01 can transmit and

receive.

Refer to the MIDI implementation chart in the A-01 Supplementary Manual.

Q. I’d like assign SysEx to the A-01’s controllers, but I don’t know how to specify

SysEx.

Refer to the A-01 Supplementary Manual, which contains a detailed explanation of this.

Q. I’d like to know about the MIDI signal ow within the A-01.

Refer to the A-01 Supplementary Manual, which contains a detailed explanation of this.

Q. Can the MIDI channel of the keyboard (K-25m) be changed from the A-01?

The MIDI channel of the keyboard (K-25m) follows the MIDI Ch that is specied in the CONTROLLER mode screen.

Inhaltsverzeichnis

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland D-110 Bedienungsanleitung

Roland

Roland CD-2 Bedienungsanleitung

Roland

Roland EDIROL PCR-300 Bedienungsanleitung

Roland

Roland SP-404SX Bedienungsanleitung

Roland

Roland U110 Bedienungsanleitung

Roland

Roland MPU-IPC Bedienungsanleitung

Roland

Roland FC-200 Bedienungsanleitung

Roland

Roland SRV-3030 Bedienungs- und Wartungshandbuch

Roland

Roland TR-6S Bedienungsanleitung

Roland

Roland MV-8800 Production Studio Gebrauchsanweisung

Roland

Roland M-GS64 Bedienungsanleitung

Roland

Roland BR-8 Bedienungsanleitung

Roland

Roland R-26 Bedienungsanleitung

Roland

Roland VP-03 Bedienungsanleitung

Roland

Roland Sound Brush SB-55 Bedienungsanleitung

Roland

Roland R-8 mkII Bedienungsanleitung

Roland

Roland TD-7 Bedienungsanleitung

Roland

Roland Studio Package Pro Bedienungsanleitung

Roland

Roland RE-150 Bedienungsanleitung

Roland

Roland SonicCell SCWS06 Gebrauchsanweisung

Roland

Roland SBX-1000 Bedienungsanleitung

Roland

Roland Camm-1 CX-24/12 Bedienungsanleitung

Roland

Roland TD-30 TurboStart Bedienungsanleitung

Roland

Roland BASS & DRUMS M-BD 1 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch