Roland EV-1-WL Bedienungsanleitung

EV-1-WL Connection Guide

(Connect with the ME-90)

This guide shows you how to pair the EV-1-WL

wirelessly to the ME-90 using BLE MIDI.

“Pairing” involves registering the MIDI device that

you want to use (making the devices recognize each

other) with the EV-1-WL.

Pairing the EV-1-WL with another compatible

device lets you control that device via MIDI from the

EV-1-WL.

What is“BLE MIDI”?

“BLE MIDI” is the technology used to transmit and

receive MIDI messages wirelessly via Bluetooth® LE

standard.

This is ocially known as “MIDI over Bluetooth Low

Energy”.

* You must update the ME-90 to Ver. 1.03 or later

to use the EV-1-WL.

https://www.boss.info/support/

Connecting the EV-1-WL to the

ME-90

1. Turn on the ME-90 (to which the BT-DUAL is

attached) and the EV-1-WL, and place them

nearby.

2. Hold down the pairing button on the BT-DUAL

until the Bluetooth indicator blinks rapidly.

3. Make sure that the Bluetooth indicator on the

EV-1-WL is blinking white.

If the indicator is blinking blue or is lit up white,

operate the device as shown below to make the

indicator blink white.

Blinking

blue

Quickly press the [Bluetooth] button twice

on the EV-1-WL.

Lit white

The unit is connected to a dierent device.

Disconnect on the connected device side,

or long-press the [Bluetooth] button on the

EV-1-WL.

4. Press the [Bluetooth] button on the EV-1-WL.

The Bluetooth indicator on the EV-1-WL rapidly

blinks white, and pairing begins.

The Bluetooth indicator on the EV-1-WL stops

blinking and remains lit white when pairing

is nished. The EV-1-WL and EV-1-WL are now

connected.

Connecting the ME-90, EV-1-WL,

and BOSSTONE STUDIO for ME-90

(iOS/Android) at the same time

When connecting at the same time, the following

two steps are required.

STEP 1: Connect the ME-90 and the EV-1-WL

STEP 2: Connect the EV-1-WL and the BOSS TONE STU-

DIO for ME-90 (iOS/Android)

1. Turn both the ME-90 and the EV-1-WL on, and

place them near each other.

2. Hold down the pairing button on the BT-DUAL

until the Bluetooth indicator blinks rapidly.

3. Make sure that the Bluetooth indicator on the

EV-1-WL is blinking white.

If the indicator is blinking blue or is lit up white,

operate the device as shown below to make the

indicator blink white.

Blinking

blue

Quickly press the [Bluetooth] button twice

on the EV-1-WL.

Lit white

The unit is connected to a dierent device.

Disconnect on the connected device side,

or long-press the [Bluetooth] button on the

EV-1-WL.

4. Press the [Bluetooth] button on the EV-1-WL.

The Bluetooth indicator on the EV-1-WL rapidly

blinks white, and pairing begins.

The Bluetooth indicator on the EV-1-WL stops

blinking and remains lit when pairing is nished,

and the EV-1-WL and the ME-90 are connected.

5. Quickly press the [Bluetooth] button on the

EV-1-WL twice to change the Bluetooth indicator

to blink blue.

If the indicator remains lit in blue, the unit is

already paired to another device.

In this case, disconnect the other device or long-

press the Bluetooth button to make the indicator

blink blue.

6. Press the [Bluetooth] button on the EV-1-WL.

The unit enters pairing mode, and the Bluetooth

indicator on the EV-1-WL rapidly blinks blue.

7. On the BOSS TONE STUDIO for ME-90 app, select

“EV-1-WL+”.

The Bluetooth indicator on the EV-1-WL stops

blinking and remains lit when pairing is nished.

If connected correctly, it will be in the following

state.

BT-DUAL Bluetooth indicator Lit blue

EV-1-WL Bluetooth indicator Lit white, lit blue *

BOSS TONE STUDIO for ME-90

device name EV-1-WL+

* To make sure the EV-1-WL Bluetooth indicator is

lit both white and blue, quickly press Bluetooth

button twice. This switches the colors.

The EV-1-WL remembers the information for the last

Bluetooth device to which it was connected.

When connecting to a dierent device after connecting

to the ME-90, or when turning o the power while the

Bluetooth indicator is blinking white (not connected), or

when doing a factory reset of the EV-1-WL, the unit does

not pair automatically.

In this case, you must start from step 1 to congure

the settings.

NOTE

You cannot use the BOSS TONE STUDIO for ME-90

and the EV-1-WL Editor at the same time.

* The ME-90 and EV-1-WL are connected

automatically next time they are restarted.

To connect the BOSS TONE STUDIO for ME-90

you must perform steps 5 and 7 each time.

* If the devices do not pair after one minute has

passed, pairing mode is automatically canceled.

ME-90 settings

The CC numbers for ME-90 are xed as shown

below.

Parameter MIDI CC numbers

Expression Pedal CC#11

Pedal eect ON/OFF

(EXP SW) CC#82

[CTL] pedal CC#80

The default CC numbers for the EV-1-WL are set as

shown below.

By changing the CC number of EXP when EXP SW is

ON from CC#1 to CC#11, EV-1-WL functions just as

the expression pedal on the ME-90 unit.

Change the CC number settings as appropriate for

your use.

Parameter MIDI CC numbers

EXP CC#11 (When EXP SW is OFF)

CC#1 (When EXP SW is ON)

EXP SW CC#82

CTL1 CC#80

CTL2 CC#81

Andere Handbücher für EV-1-WL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Roland Aufnahmegeräte Handbücher

Roland

Roland V-Drums TD-8 Bedienungs- und Wartungshandbuch

Roland

Roland SoundCanvas SC-55 Bedienungsanleitung

Roland

Roland VS-2000 Handbuch

Roland

Roland VC-2 Handbuch

Roland

Roland SVC-350 Bedienungsanleitung

Roland

Roland V-Drums TD-27 Bedienungsanleitung

Roland

Roland Realtime Arranger RA30 Bedienungsanleitung

Roland

Roland CD-2e Bedienungsanleitung

Roland

Roland CM-64 Bedienungsanleitung

Roland

Roland R-88 Bedienungsanleitung

Roland

Roland A-37 Bedienungsanleitung

Roland

Roland Texart RT-640 Bedienungsanleitung

Roland

Roland AR-3000 Bedienungsanleitung

Roland

Roland Boutique A-01 Installationsanleitung

Roland

Roland D-110 Bedienungs- und Wartungshandbuch

Roland

Roland AXIS-1 Bedienungs- und Wartungshandbuch

Roland

Roland CM-32L Bedienungsanleitung

Roland

Roland Dimension D SDD-320 Bedienungsanleitung

Roland

Roland P-20HD Bedienungsanleitung

Roland

Roland Realtime Arranger RA30 Bedienungsanleitung

Roland

Roland MKS-30 Bedienungsanleitung

Roland

Roland Octa-Capture Bedienungsanleitung

Roland

Roland FC-200 Bedienungsanleitung

Roland

Roland MKS-100 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch