RONGDA RD-3108C Bedienungsanleitung

FOR RD DIGITAL DUPLICATOR

SERVICE MANUAL

RD-3108C RD-3208C RD-4019A RD-4029A

RD-4200 RD-4220 RD-4300 RD-4320

All manuals and user guides at all-guides.com

all-guides.com

Safety Guides

Read the section before install or repair the machine.

Warning:

Do not place metallic objects or water containers on the machine,or it will result a

fire or an electric shock.

Do not palce heavy objects on the unit, or it may cause injury.

Keep the machine away from dusty or humid place.

Unplug the power connect before moving the machine.

Place the machine on a level and stable area.

Caution: Avoid installing the machine in the locations listed below.

Extremely bright locations such as locations close to windows or direct sunlight.

Locations that maybe sudden temperature change.

Extremely hot or humid locations or cold and dry locations.

Areas containing corrosive gases.

Power Connection:

Do not overload an electrical outlet or put heavy objects on it .Otherwise, a fire or an electric

shock might occur.

Do not plug or unplug the power connect if your hands are wet .Otherwise, an electric shock

might occur.

Do not pull the power cord but hold the plug itself when upplugging it,Otherwise, fire or an

electrical shock might occur.

Clean the teeth of the plug and their surroundings if dust piles on them.

Be sure to turn off the POWER switch when connecting or disconnecting a cable.

All manuals and user guides at all-guides.com

Recommendations

Printing paper:

Size: Max .297mm * 420mm

Min. 100mm * 148mm Weight: 40 g/m2------120 g/m2

NOTE:Do not use the following type of paper,as they can cause jams or misfeeds

Extremely thin paper (less than 40g/m2)

Extremely thick or heavy paper ( greater than 120 g/m2)

Wrinkled, curled, folded,or torn paper.

Chemically treated or coated paper( such as thermal paper)

a. Size and Weight Restrictions

b. Guides for better use.

Original:

Size: Max .297mm * 420mm

Min. 100mm * 148mm Weight: Max. 10 kg

NOTE: Do not use the following originals , as they can effect the quality of printing.

Wrinkled, curled ,creased , patched or worn originals

Transparent originals ,chemically treated originals

Extremely thin or thick originals (less than 50g/m2 , greater than 110g/m2)

Heavy drawing paper

Bound originals

Originals with staples or clips.

For better use of RD serial duplicator, please use the RD serial consumables(ink and master).

RD Corporation shall not be liable for errors that resulted from the use of other consumables.

All manuals and user guides at all-guides.com

Email: [email protected]

Address:

No.928,Chengxin Road, YinZhou investment and innovation center, Ningbo China.

All manuals and user guides at all-guides.com

CATALOGUE

Chapter 1 Brief Introduction.....................................1

Overviw Features......................................................2

Control Panel&Main display....................................4

Chapter 2 Sectional Description & Adjustment.......8

Chapter 3 Test Features.........................................24

Chapter 4 Troubleshooting......................................31

First Paper Feed Unit................................................9

Second Paper Feed Unit...........................................11

Master-making Unit.................................................16

Scan Unit.................................................................14

Master Disposal Unit...............................................18

Drum Unit................................................................19

Paper Receiving Unit...............................................23

RD-3108C/3208C/4019A/4029A............................25

RD-4200 RD-4220 .................................................27

RD-4220/4320.........................................................29

Drum unit................................................................32

Paper Transmission Unit.........................................38

Master Making Unit................................................40

Master Eject Unit....................................................42

Electronic Unit........................................................44

Image Unit..............................................................46

Chapter 5 Maintenance.........................................48

All manuals and user guides at all-guides.com

Chapter 1 Introduction :

This chapter mainly provides the basic information about RD duplicatior

including overview of features , control panel and names of all parts.

Overview Features

Control Panel & Main display

- 1 -

1. RD-3108C.....................................................................................2

2. RD-4019A.....................................................................................2

3. RD-4200 / RD-4300......................................................................3

4 . RD-4220/RD-4320.......................................................................3

RD-3108C/RD-3208C/RD-4019A/RD-4029A.................................4

RD-4200 / RD-4300..........................................................................5

RD-4220 / RD-4230 / RD-4320 / RD-4330......................................7

All manuals and user guides at all-guides.com

all-guides.com

1 RD-3108C

1) Paper feed guide

2) Original receiving tray

3) Scan cover

4) Original guide tray

5) Control panel

6) Front cover

7) Feed tray lock switch

8) Power switch

9) Uplift lever

10) Paper feed guide

11) Paper feeding tray

12) Paper feed pressure knob

2 RD-4019A

1) Scan cover

2) Scan glass

3) Scan tray

4) Control panel

5) Front door

6) Paper receiving tray

7) Feed tray lock switch

8ÿpower switch

9ÿuplift lever

10ÿpaper feed tray

11ÿpaper feed pressure knob

12ÿscan table release lever

8) Power switch

9) Uplift lever

10ÿpaper feed tray

11ÿpaper feed pressure knob

12ÿscan table release lever

Overview Features

- 2 -

All manuals and user guides at all-guides.com

pressure knob

12ÿscan table release lever

3. RD-4200 / RD-4300

1) Scan cover

2) Scan glass

3) Scan table

4) Control panel

5) Paper receiving tray

6) Front door

7) Uplift lever

8) Power switch

9) Paper feed tray

10) Elevator button

11) Paper feed pressure knob

12) Scan table release lever

4 . RD-4220/RD-4320

1) Scan cover

2) Scan glass

3) Scan table

4) Control panel

5) Paper receiving tray

6) Front door

7) Uplift lever

8) Power switch

9) Paper feed tray

10) Elevator switch

11) Paper feed pressure knob

12) Scan table release knob

- 3 -

All manuals and user guides at all-guides.com

RD-3108C/RD-3208C/RD-4019A/RD-4029A

Control Panel

1.Space position indicate LED : show the selected print speed.

2.Space position key: adjust the space position.

3.Print speed indicate LED : show the selected print speed.

4.Print Speed key: adjust the print speed.

5.Error display LED: show the possible position of error.

6.Master-making density key: adjust the master-making density.

7.Master-making density LED: show the selected master-making density.

8.Documetary/Photo key: select the original according to different doc/photo.

9.Documentary/Photo LED: show the selected original.

10.Main display LED: show the current equipment status or gives instructions for operation.

11.Mode key: show the content for operation.

12.Select key: confirm your selected operation.

13.Print Quantity Keys ( 0~9) enter the number of copies to be printed, or enter numeric values.

14.Clear key: cancel the number entered and resets the print quantity.

15.All Clear key: return to the inital settings.

16.Print key: start print .

17.Stop key: interrupt printing.

18:Test Print key: test print for two sheets

19.Master-making key: start master-making.

- 4 -

All manuals and user guides at all-guides.com

Control Panel

RD-4200 / RD-4300

1. Sub-indicate LED : show the enlarge/reduce, middle shrradow,group mode ,sensor test.

2.Enlarge and reduce key: enlarge and reduce the original size.

3.Master-making density indicate LED : show the selected master-making density .

4.Original size indicate LED: show the selected original size.

5.Book mode LED: show the selected book mode.

6.Original select key: select the original size according to the actual size.

7.Two in one / book/ sheet select key: select the original mode (book/sheet /two in one).

8.Book mode indicator LED: show the selected book mode status.

9.Scan / master-making density adjust key:

10.Ink save indicator LED: show the ink saving status ( light on means ink saving).

11.Doc/photo indicator LED: show the status of text, photo , text and photo.

12.Ink save select key: select the ink saving function.

13.Doc/photo select key select the doc, photo, doc/photo.

21. C key: cancel the number entered and resets the print quantity.

when the setting indicator (No.15) light on, adjust the master-making density.

when the setting indicator(No.15)light off, adjust the scan density.

14.Setting key press this key to set the master-making density.

15.Setting indicate LED: light on means now it is the setting status.

16.Error indicate LED: show the possible position of error.

17.Error indicate instruction: show the content of error.

18.Main LED display: show the quantity to be copied, total copied and master-making.

19.Print speed indicate LED: show the selected print speed.

20.Speed key: adjust the print speed.

- 5 -

All manuals and user guides at all-guides.com

Dieses Handbuch passt für folgende Modelle

Andere RONGDA Disc-Duplikator Handbücher

RONGDA

RONGDA VR-7625S Bedienungsanleitung

Beliebte Disc-Duplikator Handbücher anderer Marken

Riso

Riso CV Series Handbuch

MicroBoards Technology

MicroBoards Technology GX-2 Bedienungsanleitung

Addonics Technologies

Addonics Technologies HDUS325DX Bedienungsanleitung

Carry

Carry Pro118 Bedienungsanleitung

CopyPro

CopyPro PowerPro II Bedienungsanleitung

Primera

Primera Max Bedienungsanleitung

Logicube

Logicube EchoPlus-NG Bedienungsanleitung

Silca

Silca Delta 2000 SA Bedienungsanleitung

Reflex7

Reflex7 Daisy Chain Series Bedienungsanleitung

Vinpower Digital

Vinpower Digital SharkCopier DC Bedienungsanleitung

Codonics

Codonics Virtua E Bedienungsanleitung

Octave

Octave Copy Master II Bedienungsanleitung

Kanguru

Kanguru U2-DVDDUPE-S Bedienungsanleitung

StarTech.com

StarTech.com 8STSATDUP11 Bedienungsanleitung

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Bedienungsanleitung

Addonics Technologies

Addonics Technologies UDFH7 Bedienungsanleitung

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Bedienungsanleitung

Addonics Technologies

Addonics Technologies CFASTD5 Bedienungsanleitung