Ronson RFP200 Bedienungsanleitung

Ronson - Australia

Building 2, Port Air Industrial Estate

1A Hale Street

Botany NSW 2019

Australia

Customer Service Line 1300 139 798

Customer Service Fax 1800 621 337

Ronson - New Zealand

Private Bag 94411

Botany, Manukau

Auckland 2163

New Zealand

Customer Service Line/

Spare Parts 0800 273 845

Customer Service Fax 0800 288 513

Due to continual improvement in design or otherwise, the product you

purchase may differ slightly from the illustration in this book. Issue A13

Suits all RFP200 models

Food Processor

Important

Please retain your instruction

book for future use.

In the event that you need some assistance with your

Ronson appliance, please contact our Customer Service

Department on 1300 139 798 (Australia) or 0800 2738 45

(New Zealand). Alternatively, visit us on our website at

www.Ronson.com.au or www.Ronson.co.nz

Contents

Ronson Recommends p4

Safety First

Your Ronson Food Processor p6

Using Your Ronson p8

Food Processor

Processing Guide p13

Care and Maintenance p18

Recipes p19

Ronson Recommends Safety First

IMPORTANT: Please retain your

instruction book for future use.

At Ronson, we believe that safe performance is the ﬁrst priority in any

consumer product, so that you, our valued customer can conﬁdently

use and trust our products. We ask that any electrical appliance that

you use be operated in a sensible fashion with due care and attention

placed on the following important operating instructions.

Important Safeguards For Your Food Processor

• Carefully read all instructions before

operating the Food Processor for the ﬁrst time

and save for future reference.

• Remove and safely discard any packaging

material and promotional labels before using

the Food Processor for the ﬁrst time.

• To eliminate a choking hazard for young

children, remove and safely discard the

protective cover ﬁtted to the power plug of

this appliance.

• Do not place the Food Processor near the

edge of a bench or table during operation.

Ensure the surface is level, clean and free of

water and other substances.

• Do not use the Food Processor on a sink

drain board.

• Do not place the Food Processor on or near

a hot gas or electric burner, or where it could

touch a heated oven.

• Handle the Food Processor and attachments

with care – remember the blades and discs

are razor-sharp and should be kept out of the

reach of children.

• Use the blade protector when storing the

processing blade.

• Always ensure the Food Processor is

completely assembled before operating.

The appliance will not operate unless

properly assembled.

• Ensure the Speed Selection Dial is in the

‘OFF’ (0) position and the Food Processor

is switched off at the power outlet and the

power cord is unplugged before attaching

the processing blade, discs or processing lid.

• Always secure the processing bowl onto the

motor base before attaching the processing

blade or discs.

• Ensure the processor lid is securely locked in

place before operating.

• Do not remove the processing bowl from the

motor base whilst in operation.

• Do not push food into the food chute with

your ﬁngers or other utensils. Always use the

food pusher provided.

• Keep ﬁngers, hands, knives and other utensils

away from moving blades and discs.

• Do not place hands or ﬁngers into the

processing bowl of the Food Processor unless

the motor, processing blade and discs have

come to a complete stop.

• Ensure the Speed Selection dial is in the ‘OFF’

position and the appliance is switched off

at the power outlet and the power cord is

unplugged before removing the lid from the

Food Processor bowl.

• Ensure the motor and blades or discs have

completely stopped before disassembling.

Ensure the Speed Selection Dial is in the

‘OFF’(0) position and the appliance is

switched off at the power outlet and

the power cord is unplugged from the

power outlet before attempting to move

the appliance, when not in use, if left

unattended and before disassembling,

cleaning or storing.

• Do not use attachments other than those

provided with the Food Processor.

• Do not attempt to operate the Food

Processor by any method other than those

described in this booklet.

• Care should be taken when removing the

food from the processing bowl by ensuring

the motor and the processing blade or

disc, have completely stopped before

disassembling. Ensure the Speed Selector

Dial is turned to the ‘OFF’(0) position, the

appliance is switched off at the power outlet

and unplugged, before removing the lid

from the bowl. The processing bowl should

then be unlocked from the motor body and

the processing blade or disc holder carefully

removed before attempting to remove the

processed food.

• Do not blend a dry, thick or heavy mixture

for more than 60 seconds without turning the

Food Processor off and stirring the ingredients

before continuing to blend.

• If the Food Processor is operated

continuously for too long, it should be

allowed to rest for 25-30 minutes before

recommencing.

• Do not process hot or boiling liquids – allow

liquids to cool before placing into the

processing bowl.

• Do not move the Food Processor whilst

in operation.

• Do not leave the Food Processor unattended

when in use.

• Do not place any part of the Food Processor

in the dishwasher or microwave oven.

• Do not process thin ﬂuids such as water,

milk, stock, juice, etc., above 500ml level

in the processing bowl as this could result

in overﬂow. To reduce the risk of overﬂow,

always add drier or thicker ingredients

to the processing bowl prior to adding ﬂuids.

• Do not place anything on top of the Food

Processor when the lid is on, when in use and

when stored.

• Keep the Food Processor clean. Follow the

Maintaining Your Food Processor instructions

provided in this book.

Important Safeguards For All

Electrical Appliances

• Carefully read all instructions before operating

the appliance and save for future reference.

• Remove and safely discard all packaging

material and promotional labels before using

the appliance for the ﬁrst time.

• Fully unwind the power cord before use.

• Do not let the power cord hang over the edge

of a bench or table, touch hot surfaces or

become knotted.

• To protect against electric shock, do not

immerse the power cord, power plug or

appliance in water or any other liquid, unless it

is recommended in the cleaning instructions.

• The appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance, by a person

responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• It is recommended to inspect the appliance

regularly. Do not use the appliance if the

power supply cord, plug, connector or

appliance becomes damaged in anyway.

Return the entire appliance to the nearest

authorised Ronson Service Centre for

examination and/or repair.

• Any maintenance other than cleaning should

be performed at an authorised Ronson

Service Centre.

• This appliance is for household use only.

Do not use this appliance for other than its

intended use. Do not use in moving vehicles or

boats.

Do not use outdoors. Misuse may cause injury.

• The installation of a residual current device

(safety switch) is recommended to provide

additional safety protection when using

electrical appliances. It is advisable that a

safety switch with a rated residual operating

current not exceeding 30mA be installed in

the electrical circuit supplying the appliance.

See your electrician for professional advice.

• Always turn the appliance to the OFF

position, switch off at the power outlet

and unplug at the power outlet when the

appliance is not in use.

• Before cleaning, always turn the appliance

to the OFF position, switch off at the power

outlet, unplug at the power outlet and remove

the power cord, if detachable, from the

appliance and allow all parts to cool.

• Do not place this appliance on or near a heat

source, such as hot plate, oven or heaters.

• Position the appliance at a minimum

distance of 20cm away from walls, curtains

and other heat or steam sensitive materials

and provide adequate space above and on

all sides for air circulation.

Your Ronson Food Processor

12 13 14 15

18 20 21 22

1. Speed Selection Dial - a choice

of 3 speeds plus pulse for

complete processing/blending

control

2. Motor base - 650 watts of

processing/blending power

3. Blender jug - 1.5 litre capacity,

ideal for mixing liquids (this must

be correctly locked into the

blender drive or the blender will

NOT operate)

4. Blender jug lid – ensure this is

correctly in position before

activating

5. Blender jug ﬁller cap – for adding

ingredients whilst blending

6. Blender drive cover - this must be

correctly in place before using

the processor, otherwise the

processor will NOT operate (see

following instructions)

7. Processor bowl - extra large 1.5

litre capacity for grating/slicing

vegetables, processing foods,

mixing doughs etc

8. Processing lid and feed chute

– (processor lid must be ﬁtted

correctly or the processor will

NOT operate)

9. Automatic safety cut out –

prevents the food processor from

operating unless the processor

bowl and lid, blender jug or

blender drive cover are correctly

engaged on the motor base

(not shown)

10. Food pusher with removable

inner 80ml Measuring Cup – ﬁts

the into the food chute for safely

adding foods onto the blades

and prevents splashing when

using the processing blade

11. Processor drive shaft

12. Stainless steel thin slicing disc –

for slicing vegetables and fruits

13. Stainless steel thick slicing disc –

for slicing vegetables, chicken,

meat and salami

14. Stainless steel coarse grating disc

– for grating ﬁrm cheeses, fruit

and vegetables

15. Stainless steel ﬁne grating disc –

for grating chocolate and hard

cheeses such as Parmesan

16. Disc holder – processing discs

simply lock into place

17. Stainless steel chipping disc – for

french fries. Also handy for stir

fried vegetables

18. Unique storage holder –

conveniently and safely stores

attachments on top of lid

19. Mixing blade – use for making

dough for pastry or bread

20. Stainless steel processing blade –

use for all chopping, mixing and

processing tasks

21. Processing blade protective

cover – for storage when blade

is not in use

22. Spatula

Not Shown

• Cord storage

CAUTION:Blades must

be handled carefully as

they are sharp!

Using Your Ronson Food Processor

Correct Placement of the

Processor Bowl

Place the empty bowl onto the base,

with the handle on your right (see Fig.

1). Align the arrow on the processor

bowl handle with the align handle

arrow on the motor base. Turn

the bowl clockwise until the arrow on

the processor bowl handle is aligned

with the ‘lock’ indicator arrow on

the motor base (see Fig. 2).

Fig. 1

Fig. 2

Before First Use

Before ﬁrst use remove and safely

discard any promotional labels and

wash the food processor bowl

and all blades in warm, soapy water.

Dry thoroughly. Place the motor base

on a level, ﬂat surface.

CAUTION:Blades must

be handled carefully as

they are sharp!

Assembly and Operation of

the Food Processor

Your food processor features 3 safety

locking devices.

NOTE: The food processor will

not work unless all of the below

are in place:

1. The blender drive cover is correctly

LOCKED into position

2. The processor bowl is correctly

LOCKED into position

3. The processor lid is correctly LOCKED

into position

NOTE: Always ensure that the

food processor is disconnected

from the power outlet and the

speed selection Dial is turned

to the ‘OFF’ (0)position before

assembling or disassembling

the food processor.

Locate Tab

Fig. 4

Fig. 5

2. To remove disc, hold disc away

and place thumbs underneath disc

at top of disc marked ‘push up’

and push out (see Fig. 6). The disc

may be tight for the ﬁrst few times.

Fig. 6

Using The Processing Blade/

Discs

Fig. 3

Using the Processing/

Mixing Blade

1. Select either the processing or

plastic mixing blade.

2. Place the processing/mixing blade

over the drive shaft and push down

(see Fig. 3).

Using the Slicing/

Grating Discs

1. Select the desired slicing/grating

disc and assemble into the disc

holder (see Fig. 4). To ﬁt the stainless

steel disc onto disc holder, ﬁt left

side of disc (when writing is towards

you), with locating tab into holder,

then push right side down ﬁrmly

until it locks into place (see Fig. 5).

Fit the end without the push up

marking in ﬁrst. Then push the ‘push

up’ side down ﬁrmly until it locks

into place.

Inhaltsverzeichnis

Andere Ronson Küchenmaschine Handbücher

Ronson

Ronson RFP600 Series Bedienungsanleitung

Beliebte Küchenmaschine Handbücher anderer Marken

INNOLIVING

INNOLIVING INN-727 Bedienungsanleitung

Berkel

Berkel C32 Bedienungsanleitung

Beko

Beko CHP5554W Bedienungsanleitung

KitchenAid

KitchenAid 5KFP0719 Bedienungsanleitung

QUIGG

QUIGG KM 2017Wi.20 Bedienungsanleitung

Lakeland

Lakeland PRESS AND CHOP 31557 Bedienungsanleitung

Bosch

Bosch MMR08 GB Series Bedienungsanleitung

HOFFEN

HOFFEN Chef Express T9532 Bedienungsanleitung

Garland

Garland 852 ZG Bedienungsanleitung

Robot Coupe

Robot Coupe CL50 Gourmet Bedienungsanleitung

SAPIRHOME

SAPIRHOME SP-1111-K Bedienungsanleitung

Moulinex

Moulinex DJ3051 Bedienungsanleitung

Bosch

Bosch MUM5 Bedienungsanleitung

cecotec

cecotec Mambo Touch Bedienungsanleitung

KitchenAid

KitchenAid 9KFC0516 Bedienungsanleitung

Black & Decker

Black & Decker hc 300 Montageanleitung

Gorenje

Gorenje SBR 1000 DV Bedienungsanleitung

Arzum

Arzum AR 1128 Bedienungsanleitung