Special Programming Features:
All special programming features are accessed by the same steps:
1. Slide the programming switch into programming mode (the layer indicator will
blink).
2. Press the key that you want to program (the layer indicator will double-blink).
3. Press and hold the Esc key.
4. Press and release the associated command key (see table and instructions
below).
5. Release the Esc key.
6. Confirm programming on the key (the layer indicator will blink).
7. Slide the programming switch back to the operating position (the layer
indicator will glow steadily).
Once you become familiar with the special programming features on the
following pages, this list of key commands serves as a useful reference.
Command Symbol Legend
Þ indicates when to press and hold a key down
Ú indicates when to tap a key
Ý indicates when to release the key.
<> Chevrons indicate the key to be pressed
NOTE: All numbers are on the alphanumeric section of the keyboard (not the
number pad). Single Key Programming Features
Feature Associated Keystrokes
Layer-toggle Þ<Esc> Ú<2> Ý<Esc>
Layer-shift Þ<Esc> Ú<1> Ý<Esc>
Repeating Key Þ<Esc> Ú<Left-Shift> Ý<Esc>
Separate Press and Release Þ<Esc> Ú<Left-Ctrl> Ý<Esc>
Pause Þ<Esc> Ú<5> Ý<Esc>
Erasing a Key Ú<Esc> Ú<Esc> Ú<Esc>
Entire Keyboard Programming Features
Feature Associated Keystrokes
Slow Transmission Speed Þ<Esc> Ú<3> Ý<Esc>
Normal Speed Þ<Esc> Ú<4> Ý<Esc>
Caps Lock/Unlock Memory Þ<Esc> Ú<8> Ý<Esc>
Caps Lock/Shift Unlock Memory Þ<Esc> Ú<9> Ý<Esc>
No Caps Lock Memory Þ<Esc> Ú<7> Ý<Esc>
Resetting the Keyboard Ú<Esc> Ú<Backspace> Ú<Esc>
Ú<Esc>Ú<Esc>
Backlighting on X-keys Stick
Backlighting toggle key Þ<Esc> Ú<B> Ý<Esc>
Default backlighting on/off Þ<Esc> Ú<L> Ý<Esc>
