Rose electronics B - Chassis Betriebsanleitung

10707 Stancliff Road Phone: (281) 933-7673

Houston, Texas 77099 WWW.ROSE.COM

INSTALLATION AND OPERATIONS

SUPPLEMENT

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or

transcribed in any form or any means, electronic or mechanical, including

photocopying and recording, without the prior written permission of Rose Electronics.

Rose Electronics Part # MAN-MV

Printed In the United States of America n

Rose Electronics warrants the MultiVideo™to be in good working order for one year from the

date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in

good working order at any time during this one-year warranty period, Rose Electronics will, at its

option, repair or replace the Unit as set forth below. Repair parts and replacement units will be

either reconditioned or new. All replaced parts become the property of Rose Electronics. This

limited warranty does not include service to repair damage to the Unit resulting from accident,

disaster, abuse, or unauthorized modification of the Unit, including static discharge and power

surges.

Limited Warranty service may be obtained by delivering this unit during the one-yearwarranty

period to Rose Electronics or an authorized repair center providing a proof of purchase date. If

this Unit is delivered by mail, you agree to insure the Unit or assume the risk of loss or damage in

transit, to prepay shipping charges to the warranty service location, and to use the original

shipping container or its equivalent. You must call for a return authorization number first. Under

no circumstances will a unit be accepted without a return authorization number. Contact an

authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE

LIMITED IN DURATION TO A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR

SOLE REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO

EVENT WILL ROSE ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING

ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL

DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT,

EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT

APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY

ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

IBM ®, AT, and PS/2 are trademarks of International Business Machines Corp.

Microsoft ® and Microsoft Windows™are registered trademarks of Microsoft Corp.

Apple, Macintosh, and ADB are trademarks of Apple Computer, Inc.

Sun is a registered trademark of Sun MicroSystems Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owner.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

This manual supplement explains the additional information needed to

install and configure the MultiVideo products. Use this supplement in

conjunction with the supplied manual. The supplied manual explains the

additional features and the on-screen display capability of the MultiVideo.

System overview

The MultiVideo is designed to provide seamless, trouble-free switching from

a single KVM station to any connected computer and display the multi-video

output from the computer. You can switch to any of the connected

computers by simple keyboard commands, the front panel –or + buttons, or

from a computer terminal or standalone PC connected to the RS/232 serial

port (not connected to a CPU port). With the OSD option, you can switch to

a connected computer from an on-screen list of the connected computers.

If your system demands are greater than a single unit can provide, the

MultiVideo can be easily expanded to connect up to 64 computers by

chaining units together with expansion cables. All MultiVideo models can

easily be expanded by chaining the units together and configuring the

system. Using the 2 port “M”-chassis, you can expand the system to 4

computers. The 4 port “B”-chassis can expand to 16 computers, and the 8

port “C”-chassis can expand to 64 computers.

Features

nn Access up to 64 computers from one KVM station

nn Optional On-Screen-Display

nn Available in three different chassis sizes:

M -Chassis -2 CPUs to 1 Kbd, 1 mouse, and 2 monitors

B -Chassis -4 CPUs to 1 Kbd, 1 mouse, and 2 monitors

C -Chassis -2 CPUs to 1 Kbd, 1 mouse, and 4 monitors

4 CPUs to 1 Kbd, 1 mouse, and 4 monitors

8 CPUs to 1 kbd, 1 mouse, and 2 monitors

VIDEO connection

Video inputs 2-4 are DB25F connectors. A DB25 to HD15 cable is needed

for each video output from a CPU.

MODELS

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

MultiVideo models

M –Chassis

B –Chassis

C -Chassis

Figure 1. MultiVideo models

Label Description

Power Power LED -Green when unit is on

LEDs

Indicator LEDs; Numbered pairs of

LEDs shows status and power of

connected computers

-and +

Switches*

-Connects to the previous CPU

+ Connects to the next CPU

* The -and + switches are used when:

nn upgrading the firmware

nn resetting the unit to factory defaults

nn running diagnostics.

Table 1. Front panel

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

MultiVideo models (rear)

“M” Chassis (2U2V)

“B” Chassis (4U2V)

“C” Chassis (2U4V)

“C” Chassis (4U4V)

“C” Chassis (8U2V)

Figure 2. Rear panel

NOTE: DB9 (LINK) connector on Video expansion units only

Power connector not used on Video expansion unit.

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

Label Connector Description

Power

“M” Chassis only

DIN 5F

Power adapter connector

None

“B” and “C” Chassis only

IEC320

Power receptacle w/switch

Link DB9F –Expansion connector

(Video expansion models only)

X =

CPU #

DB25F –CPU connectors

Video #

DB25F –CPU monitor only

connectors

KVM-1

DB25F -KVM connector.

MONITOR

KVM additional monitor(s)

RS232

RJ12

6-conductor jack

Table 2. Rear panel connectors

Cables

Master to Slave unit cables

In systems needing additional CPUs, the MultiVideo can be cascaded to

other MultiVideos. To cascade a MultiVideo to other “Slave” units, you will

need one DB25M to DB25M, switch-to-switch cable for each cascaded unit.

The MultiVideo can also be expanded to add additional Video ports. A

DB9M to DB9M, switch-to-switch cable is used with the MultiVideo video

expansion units.

(Rose Electronics switch-to-switch cable part number CAB-CXVSMMnnn.)

(See Appendix B for cable part numbers)

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

Installation –Single unit

Figure 3. 4U2V Unit installation

Installation –Cascading units

Figure 4. Cascading units

Dual-Video CPUs (1-4)

Video 1

Video 2

KVM Station

Master

Slave#1

Slave#2

Dual video

CPUs 1-4

Dual video

CPUs 5-8

Two additional “Slave”

units can be added to

this configuration.

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

Applications

VIDEO 1

VIDEO 8

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

Installation –Video Expansion system

The MultiVideo can be custom configured to expand the number of video

ports. The example below can have up to 16 separate video sources and

up to 8 video outputs. The KVM station can switch the video by simple

keyboard commands, the push-button switches on the front panel, or from

the on-screen display.

Figure 5. Custom 2x8 configuration

Video 1

Video 8

Dual video

CPU 1 of 8

KVM Station

Link

Cable 16-Video In

8-Video Out

APPENDICES

MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL

Appendix B. Parts and cables

Part number Description

CAB-D9MM005 DB9M to DB9M Link cable

CAB-CXVSMMnnn DB25M to DB25M Cascading cable

CAB-C1Y0000Cnnn HD15M to DB25F Video only cable (CPU)

CAB-C1V0000Mnnn HD15F to DB25F Video only cable (Monitor)

CAB-S13W3000Cnnn CPU (SGI) 13W3 to DB25M video only cable

CAB-SC0000Cnnn CPU (SUN) 13W3 to DB25M video only cable

CAB-SB0000Mnnn SUN video 13W3 to DB25M video only cable

CAB-S13W30000Mnnn SGI video 13W3 to DB25M video only cable

Appendix C. General Specifications

The MultiVideo part number is Mwx-yUzV

Where w = platform, E = (Multi-platform) PC, SUN, Apple, Unix

P = (PC) PC and Unix computers

Where x = chassis size, M (mini), B (low), C (high)

Where y = number of CPUs (2, 4, or 8)

Where z = number of monitors (2 or 4)

The MultiVideo Video expansion model part numbers are:

MPC –2U4V/MV (Master unit)

MPC –2U4V/SL (Slave unit)

Connectors Power –IEC 320 standard receptacle

CPU/KVM connector –DB25F

Video ports –DB25

RS232 connector –RJ12, 6 conductor

Interconnect –DB9 (Custom configuration)

Indicators 1 Power LED

2-8 Select LEDs

2-8 Computer power LEDs

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rose electronics Schalten Handbücher

Rose electronics

Rose electronics Xtensys XTS-V16x64D16-L Bedienungsanleitung

Rose electronics

Rose electronics UltraView Pro Bedienungsanleitung

Rose electronics

Rose electronics Vista L SERIES Bedienungsanleitung

Rose electronics

Rose electronics KVM-4THD/4K Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix UM16-0X16U/E2 Bedienungsanleitung

Rose electronics

Rose electronics MultiStation ML-2U Bedienungsanleitung

Rose electronics

Rose electronics MASTER SWITCH Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix Remote 2 Bedienungsanleitung

Rose electronics

Rose electronics ServeView Pro Bedienungsanleitung

Rose electronics

Rose electronics SuperSwitch SS-9 Bedienungsanleitung

Rose electronics

Rose electronics RE2-1R2X16U Bedienungsanleitung

Rose electronics

Rose electronics MasterSwitch MS-5P Bedienungsanleitung

Rose electronics

Rose electronics Station Master Bedienungsanleitung

Rose electronics

Rose electronics SuperSwitch SS-9 Bedienungsanleitung

Rose electronics

Rose electronics UEB-8UB Handbuch

Rose electronics

Rose electronics Ultraview Pro UKT-KVM-1U08-Z Bedienungsanleitung

Rose electronics

Rose electronics UltraView Bedienungsanleitung

Rose electronics

Rose electronics Vista LC DVI Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix AV Bedienungsanleitung

Rose electronics

Rose electronics UltraView DVI Bedienungsanleitung

Rose electronics

Rose electronics QuadraVista Bedienungsanleitung

Rose electronics

Rose electronics Ultraview Pro KVM SWITCH WITH ON-SCREEN... Bedienungsanleitung

Rose electronics

Rose electronics ServeView Pro SEB-8UB Bedienungsanleitung

Rose electronics

Rose electronics MultiStation ML-2U Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung