Rose electronics MultiVideo DP MDM-4T2DP-A1 Bedienungsanleitung

MultiVideo

1×4 Multi

-head KVM Switch • DisplayPort • USB2.0 • Audio

Installation

and

Operation Manual

10707 Stancliff Road

Houston, Texas 77099

Phone: (281) 933-7673

[email protected]

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and

recording, without the prior written permission of Rose Electronics.

manual-multivideo-dp-2018-04-19

Rose Electronics®warrants the MultiVideo DP KVM Switch to be in good working order for one year from the

date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working

order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the

Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All replaced

parts become the property of Rose Electronics. This limited warranty does not include service to repair

damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit, including

static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose

Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,

you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the

warranty service location, and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return authorization

number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A

PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE

ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST

SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE.

TABLE OF CONTENTS

Contents

Disclaimer 1

System Introduction 1

Features 1

Package Contents 2

Additional Items that may be required 2

MultiVideo DP Models 3

Installing the MultiVideo DP Switch 5

Operation 6

Controlling the Multivideo DP 6

Front Panel Control 6

Hotkey Commands 6

Control using the RS-232 port 7

Establish a connection to the Multivideo DP switch 7

EDID Learning and Programming (HDMI Model Only) 8

Safety 9

Maintenance and Repair 10

Technical Support 10

Figures

Figure 1. MultiVideo DP Dual Front Panel 3

Figure 2. MultiVideo DP Dual with DisplayPort Output Rear Panel 3

Figure 3. MultiVideo DP Dual with HDMI Output Rear Panel 3

Figure 4. MultiVideo DP Quad Front Panel 4

Figure 5. MultiVideo DP Quad with DisplayPort Output Rear Panel 4

Figure 6. MultiVideo DP Quad with HDMI Output Rear Panel 4

Figure 7. MultiVideo DP Dual typical application 5

Figure 8. Front Panel Buttons 6

Figure 9. Examples of 9 pin RS-232 Straight Through and Crossed Cables 7

Figure 10. Identifying Serial Ports on Window Device Manager 7

Tables

Table 1. Keyboard hotkey and RS-232 serial port commands 6

Appendices

Appendix A —Specifications 11

Appendix B —Part Numbers 12

INTRODUCTION

MultiVideo DP KVM Switch Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer assumes no

responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting

from the use of the information contained herein. The manufacturer reserves the right to change the

specifications, functions, circuitry of the product, and manual content at any time without notice.

The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances

outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury

arising directly or indirectly from the use of this product (See limited warranty).

System Introduction

Thank you for choosing the MultiVideo DP. It is the result of Rose Electronics commitment to providing state-

of-the-art solutions for today’s demanding workplace. It is capable of switching up to four dual-head or quad-

head DisplayPort computers through a single user console.

The MultiVideo HDMI is DisplayPort 1.1 and HDMI compliant, and supports screen resolutions up to 4K Ultra-

HD (3840x2160 @ 30Hz). Up to four USB 2.0 devices can be connected to the unit, which can be switched in

tandem with the video or separately. The switch can be controlled through the front panel buttons. Keyboard,

hot-key commands, or from a computer through an RS-232 interface. A separate analog audio interface can

also be switched in tandem or independently. The DisplayPort signal also passes the embedded audio with no

restriction.

EDID pass-through and full USB and mouse emulation of all connected monitors, keyboards and mice allow for

smooth switching.

Features

■Quad-head or dual-head video input

■Output video can be DisplayPort or HDMI according to model

■Resolutions up to 3840×2160 @ 30 Hz

■DisplayPort 1.1a compliant

■Full USB keyboard and mouse emulation to all computers provides switching without interruption

■Independent switching of KVM, peripheral USB devices, and audio

■Unit can be controlled using front panel push buttons, keyboard hot key commands, or RS-232 commands

from an external controller

■Front panel LEDs indicate the active computer connection

■Can be used with any major operating system: Windows, Linux, MAC OS

■EDID pass-through enables smooth and efficient switching

■Mounts in a standard 19 inch rack

MultiVideo DP KVM Switch Manual 2

Package Contents

The package contents consist of the following items:

■MultiVideo DP Switch

■External power supply

■Power cable

■User Manual

Additional Items that may be required

■USB Type A to USB Type B M/M cable

■DisplayPort to DisplayPort M/M cable

■HDMI to HDMI M/M cable

■Stereo 3,5mm audio M/M cable

■Serial DB9 M/F cable

These cables can be ordered separately from Rose Electronics.

MODELS

MultiVideo DP KVM Switch Manual 3

MultiVideo DP Models

The MultiVideo DP comes as a dual-head or quad-head KVM switch. Each is offered in two models – one with

a DisplayPort output, and the other with a HDMI output.

Figure 1. MultiVideo DP Dual Front Panel

Figure 2. MultiVideo DP Dual with DisplayPort Output Rear Panel

Figure 3. MultiVideo DP Dual with HDMI Output Rear Panel

MultiVideo DP KVM Switch Manual 4

Figure 4. MultiVideo DP Quad Front Panel

Figure 5. MultiVideo DP Quad with DisplayPort Output Rear Panel

Figure 6. MultiVideo DP Quad with HDMI Output Rear Panel

MultiVideo DP KVM Switch Manual 5

Installing the MultiVideo DP Switch

Installation of the MultiVideo DP is very simple.

Figure 7. MultiVideo DP Dual typical application

Ensure that power is disconnected from MultiVideo DP.

1. Connect DisplayPort cables and USB type A to type B cables between each computer and its

respective ports on the MultiVideo DP.

2. If desired, use 3.5mm stereo jack audio cables (male to male) to connect the computers’ analog audio

line out ports to their respective audio input ports on the switch.

3. Optionally connect a serial control cable from an external controller to the DB9 connector.

4. Connect the console displays to the video output connectors.

5. Connect the USB keyboard and mouse to the unit’s console keyboard and mouse connectors located

at the lower right hand side of the rear panel.

6. Optionally connect analog audio output equipment to the 3.5mm analog output stereo jack.

7. Optionally connect up to two USB 2.0 devices (flash drive, printer, etc.) to the USB 2.0 connectors.

8. Apply power to the MultiVideo DP.

MultiVideo DP KVM Switch Manual 6

Operation

Controlling the Multivideo DP

The computers on the Multivideo DP can be switched using the buttons on the Front Panel, through keyboard

hot-key commands, or RS-232 commands. The video, keyboard, and mouse can all be switched

simultaneously or independently of each other. Each of these is described below.

Front Panel Control

To switch ports using the front panel, press the ▲button to navigate up and ▼button for down.

Figure 8. Front Panel Buttons

Hotkey Commands

A Hotkey command is a keyboard sequence used to trigger an action on the Multivideo DP through the use of

the keyboard connected on the USB port of the Multivideo DP. To activate the hotkey sequence, press the

CTRL key twice and then enter the desired hotkey commands.

Commands Hotkeys RS-232 Control

Switch all devices (KVM, USB 2.0, and

Audio) [CTRL] [CTRL] m [port#] [ENTER] //m[port #][cr]

Switch KVM only [CTRL] [CTRL] c [port#] [ENTER] //c[port #][cr]

Switch audio only [CTRL] [CTRL] a [port#] [ENTER] //a[port #][cr]

Switch USB2.0 only [CTRL] [CTRL] u [port#] [ENTER] //u[port #][cr]

Switch analog audio only [CTRL] [CTRL] a [port#] [ENTER] //a[port #][cr]

EDID learning (Model with HDMI only) [CTRL] [CTRL] e [ENTER] //e[cr]

Same as front panel ▲button [CTRL] [CTRL]

↑

(up arrow key) n/a

Same as front panel ▼button [CTRL] [CTRL] ↓ (down arrow key) n/a

Reset [CTRL] [CTRL] r //r

Reset to factory defaults [CTRL] [CTRL] f //f

Table 1. Keyboard hotkey and RS-232 serial port commands

MultiVideo DP KVM Switch Manual 7

Control using the RS-232 port

Controlling the Multivideo DP via RS-232 requires an RS-232 card installed on your computer or a USB to RS-

232 adapter. Below are instructions on how to create an RS-232 connection between a PC and the Multivideo

DP switch

Use a terminal client software to connect the host PC or notebook to the switch. Make sure to use

communication settings 9600 bps, N, 8, 1 No flow control.

Check the device and your PC to determine if you need a male to male or a male to female cable and how long

it needs to be. The Multivideo DP requires a straight through cable. You can use a Null Modem Adapter to

convert a crossed cable to a straight through cable. Examples of crossed and straight thorough cable pin-outs

are shown below. The standard maximum length for an RS-232 cable is 50 feet (15 meters).

Figure 9. Examples of 9 pin RS-232 Straight Through and Crossed Cables

Establish a connection to the Multivideo DP switch

1. Connect an RS-232 cable to the RS-232 connector on the PC.

2. Connect the other end of the cable to the RS-232 port of the Multivideo DP.

3. On Windows, use the Windows Control Panel / Device Manager to identify the COM port number. See

instructions and Figure 10. below.

4. Power on the device.

Figure 10. Identifying Serial Ports on Window Device Manager

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rose electronics Schalten Handbücher

Rose electronics

Rose electronics Vista L SERIES Bedienungsanleitung

Rose electronics

Rose electronics MultiStation ML-2U Bedienungsanleitung

Rose electronics

Rose electronics Vista Remote 2 Bedienungsanleitung

Rose electronics

Rose electronics CTP-4P Bedienungsanleitung

Rose electronics

Rose electronics UltraView Pro Bedienungsanleitung

Rose electronics

Rose electronics ORION lc Bedienungsanleitung

Rose electronics

Rose electronics VISTA KVL Bedienungsanleitung

Rose electronics

Rose electronics KVM-4THD/4K Bedienungsanleitung

Rose electronics

Rose electronics Vista DVI Plus Bedienungsanleitung

Rose electronics

Rose electronics Orion XC OXS-XC080-TP Bedienungsanleitung

Rose electronics

Rose electronics UltraConsole UC1-1X4U Bedienungsanleitung

Rose electronics

Rose electronics Ultraview Pro KVM SWITCH WITH ON-SCREEN... Bedienungsanleitung

Rose electronics

Rose electronics CTP-4P Bedienungsanleitung

Rose electronics

Rose electronics UltraVista Bedienungsanleitung

Rose electronics

Rose electronics UltraLink Lite UL-LV3 Bedienungsanleitung

Rose electronics

Rose electronics Vista KVL-4PCA Bedienungs- und Sicherheitshinweise

Rose electronics

Rose electronics UltraConsole Remote UCR-1R1X04U Bedienungsanleitung

Rose electronics

Rose electronics QuadraVista Bedienungsanleitung

Rose electronics

Rose electronics ServeView Pro Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix AV HD Bedienungsanleitung

Rose electronics

Rose electronics Caretaker Plus Automatic Switch Bedienungsanleitung

Rose electronics

Rose electronics RE2-1R2X16U Bedienungsanleitung

Rose electronics

Rose electronics VISTA DVI Bedienungsanleitung

Rose electronics

Rose electronics B - Chassis Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung