Rose electronics MultiVideo Bedienungsanleitung

MultiVideo Single unit Installation

The following installation procedure features the 4CPU, 2 video model.

Installation for other models follow the same basic procedure.

It is recommended that power to all monitors, computers, and MultiVideo be off

until all connections have been made.

The below illustration shows the basic cable connections for MultiVideo and the

installation steps to properly connect the cables, computers, KVM station and

monitor to MultiVideo.

1. Connect a KVM station to the KVM, DB25F connector using the appropriate

KVM adapter cable.

2. Connect the computers to MultiVideo using the appropriate CPU adapter

cable. Connect the keyboard, monitor, and mouse computer ports to the

corresponding connectors on the CPU adapter cable. Connect the DB25M

connector to the CPU DB25F connector on MultiVideo.

3. Connect the second video output from the computer to MultiVideo using a

DB25M to HD15M cable.

4. Connect other computers and video outputs

5. With all cabling in place, power on:

a. all monitors

b. the MultiVideo switch

c. boot the computers last.

Please refer to the Installation and Operations manual for the installation

procedure for other models +and for expanded system.

KVM Station

KVM adapter

cable

CPU adapter

cable

Operating Instructions

With all cabling in place and power applied to all equipment, the video monitor

connected to the KVM port should display the video #1 from computer #1

(default) and Video #2 from computer #1. Switching to other computers is

accomplished by:

1. Keyboard commands (press and release left Ctrl key + CPU #)

(LCtrl + 3 switches to port #3)

2. Front panel push buttons (+ and – buttons)

3. Remotely using the RS232 port and sending switching commands from a

remotely connected computer using a communication program like

HyperTerminal. (Sending 8, enter, switches the KVM to CPU port #8)

4. Optional OSD menu system

Additional keyboard commands are available for other switching methods,

invoking the scan mode, and others. See Table 1 for a list of keyboard

commands and their functions.

The OSD provides a visual interface to the features, set-up and additional

functions. The OSD is invoked by pressing and releasing the left Ctrl key, then

the F12 key. The below menu will display for configuring the System,

Computers, Overlay and security. Refer to the Installation and Operations

manual for a detailed description of each menus features and options.

To navigate through the menu system, use the arrow keys to select the

configuration menu needed and press [Enter]. When you press [Enter] that

menu will display, an input box will display for a new value, or a list of

supported choices will display. Enter or select the information needed and

press [Enter]. To return to the previous page or abort an input, press the [Esc]

key.

Use arrow keys to highlight

selection and press enter

or press escape to exit

View/change keyboard, mouse, expansion, and scanning

Main configuration menu

Configure computers

Configure overlay

Configure security

Exit

Configure system

No part of this publication may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission of

Rose Electronics.

Rose Electronics Part # QS-MV

Printed In the United States of America

Keyboard commands

The following table describes the available keyboard commands. The <Ctrl>

key sequence is a press and release of the left control key. Commands

following <Ctrl> must be entered within 2 seconds.

Command Key sequence Description

OSD menu <Ctrl> F12 Displays on-screen menus

CPU select <Ctrl> ESC List of CPUs to select

Select computer <Ctrl> nnn where nnn

= computer number Connects the KVM station to the

selected computer.

Next computer <Ctrl> + Selects next sequential CPU

Previous computer <Ctrl> - Selects previous sequential CPU.

Scan ON <Ctrl> S Turns scan mode on

Scan OFF <Ctrl> X Turns scan mode off

Display label <Ctrl> D Turns CPU label on/off

Logoff <Ctlr> L Disconnects from currently

connected computer.

Set mode <Ctrl> Mnn <Enter>

where nn = mode

value from manual.

Alternate way to configure

keyboard and mouse.

Set resolution <Ctrl> Yn <Enter>

where n = resolution

value from manual

Alternate way to set screen

resolution when no video is present

from a CPU..

Screen saver time <Ctrl> Vnnn <Enter>

where n = 0 –999 sec. Alternate way to set screen saver

time.

Null mouse

command <Ctrl> N Used to re-sync a PS/2 mouse.

Reset mouse <Ctrl> O (alpha O) Resets computer’s mouse.

Reset command <Ctrl> R Resets and enables mouse and

keyboard on currently selected

computer

Max computers <Ctrl> Pnnn Total ports used (all units)

Units <Ctrl> Unn Number of expansion units.

Width <Ctrl> Wnn Number of ports on expansion

units.

Keep <Ctrl> K Saves to flash memory.

Table 1 - Keyboard Commands

〒103-0014

東京都中央区日本橋蛎殻町 1-16-11

TEL:03-3668-8089 FAX:03-3668-9872

URL:http://www.cybernetech.co.jp

Andere Handbücher für MultiVideo

Andere Rose electronics Schalten Handbücher

Rose electronics

Rose electronics Vista AV Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix Remote 2 Bedienungsanleitung

Rose electronics

Rose electronics Vista Remote 2 Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix EE4-4X16U Installationsanleitung

Rose electronics

Rose electronics VISTA KVL Bedienungsanleitung

Rose electronics

Rose electronics Video Easyware Betriebsanleitung

Rose electronics

Rose electronics Vista L SERIES Bedienungsanleitung

Rose electronics

Rose electronics Vista Mini Bedienungsanleitung

Rose electronics

Rose electronics MultiVideo Betriebsanleitung

Rose electronics

Rose electronics UltraMatrix AV HD Bedienungsanleitung

Rose electronics

Rose electronics UltraConsole Remote UCR-1R1X04U Bedienungsanleitung

Rose electronics

Rose electronics MultiVideo HDMI MDM-4T2HD-A1MultiVideo HDMI... Bedienungsanleitung

Rose electronics

Rose electronics UltraLink 2 Bedienungsanleitung

Rose electronics

Rose electronics Xtensys Bedienungsanleitung

Rose electronics

Rose electronics ORION lc Bedienungsanleitung

Rose electronics

Rose electronics UltraLink UL-DV3 Bedienungsanleitung

Rose electronics

Rose electronics UltraConsole UC1-1X4U Bedienungsanleitung

Rose electronics

Rose electronics MultiStation ML-2U Bedienungsanleitung

Rose electronics

Rose electronics ULTRAMATRIX 4xE Bedienungsanleitung

Rose electronics

Rose electronics Vista KVL-4PCA Bedienungsanleitung

Rose electronics

Rose electronics MultiVideo DP MDM-4T2DP-A1 Bedienungsanleitung

Rose electronics

Rose electronics B - Chassis Betriebsanleitung

Rose electronics

Rose electronics UltraView Pro Professional Series Bedienungsanleitung

Rose electronics

Rose electronics UltraMatrix AV Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung