Rosslare AC-Q74 Montageanleitung

2012

March

AC-Q74

Secured Access Control Unit

Installation and Programming Manual

This manual and the information contained herein are proprietary to REL, RSP

Inc. and/or their related companies and/or subsidiaries’ (hereafter:”ROSSLARE”).

Only ROSSLARE and its customers have the right to use the information.

No part of this manual may be re-produced or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the express written

permission of ROSSLARE.

ROSSLARE owns patents and patent applications, trademarks, copyrights, or

other intellectual property rights covering the subject matter in this manual.

TEXTS, IMAGES, AND ILLUSTRATIONS INCLUDING THEIR ARRANGEMENT IN

THIS DOCUMENT ARE SUBJECT TO THE PROTECTION OF COPYRIGHT LAWS

AND OTHER LEGAL RIGHTS WORLDWIDE. THEIR USE, REPRODUCTION, AND

TRANSMITTAL TO THIRD PARTIES WITHOUT EXPRESS WRITTEN PERMISSION

MAY RESULT IN LEGAL PROCEEDINGS.

The furnishing of this manual to any party does not give that party or any third

party any license to these patents, trademarks, copyrights or other intellectual

property rights, except as expressly provided in any written agreement of

ROSSLARE.

ROSSLARE reserves the right to revise and change this document at any time,

without being obliged to announce such revisions or changes beforehand or

after the fact.

Table of Contents

AC-Q74 Installation and Programming Manual iii

Table of Contents

1. Introduction ................................................................9

1.1 Equipment Provided ................................................................ 9

1.2 Additional Equipment Required................................................ 9

2. Technical Specifications............................................10

2.1 Electrical Characteristics......................................................... 10

2.2Environmental Characteristics ................................................ 10

2.3 Mechanical Characteristics..................................................... 10

3. Key Features..............................................................11

4. Installation ................................................................12

4.1 Mounting the AC-Q74 Controller .......................................... 12

4.2 Wiring the AC-Q74 ............................................................... 13

5. Normal, Secure, & Master Users ...............................15

6. Modes of Operation ..................................................16

6.1 Normal Mode ....................................................................... 16

6.2 Bypass Mode ........................................................................ 16

6.3 Secure Mode ........................................................................ 17

7. Changing the Modes of Operation...........................18

7.1 Changing from Normal Mode to Secure Mode ....................... 18

7.2 Changing from Secure Mode to Normal Mode ....................... 18

7.3 Changing from Normal Mode to Bypass Mode ....................... 19

7.4 Changing from Bypass Mode to Normal Mode ....................... 19

8. Request to Exit (REX) Function.................................20

9. Case and Back Tamper ..............................................21

Table of Contents

iv AC-Q74 Installation and Programming Manual

10. PC-25T Power Supply Unit.........................................22

11. Programming the AC-Q74 .........................................23

11.1 Entering Programming Mode................................................. 24

11.2 Exiting Programming Mode ................................................... 24

11.3 Changing Lock Strike Code 1................................................. 25

11.4 Changing Lock Strike Code 2................................................. 26

11.5 Changing the Programming Code.......................................... 26

11.6 Changing the Normal/Secure Code ........................................ 27

11.7 Changing the Normal/Bypass Code ........................................ 27

11.8 Defining the Lock Settings ..................................................... 29

11.9 Enrolling Primary & Secondary Codes ..................................... 30

11.9.1 Primary Codes...............................................................................30

11.9.2 Secondary Codes ..........................................................................30

11.9.3 Enrolling Primary and Secondary Codes ........................................30

11.9.4 Enrolling Primary and Secondary Codes using the Standard Method

.....................................................................................................31

11.9.5 Enrolling Secondary Codes using the Code Search Method ..........32

11.10 Deleting Primary & Secondary Codes...................................... 33

11.10.1 Deleting Primary and Secondary Codes using the Standard Method

.....................................................................................................33

11.10.2 Deleting Primary and Secondary Codes using the Code Search

Method ........................................................................................34

11.11 Return to Factory Default Settings.......................................... 35

11.12 Replacing a Lost Programming Code ...................................... 35

11.13 Replacing a Lost Normal/Secure Code .................................... 36

12. Power Supply Installation Instructions....................37

12.1 Introduction and Key Features ............................................... 37

12.2 Electrical Specifications.......................................................... 38

Table of Contents

AC-Q74 Installation and Programming Manual v

12.3 Environmental Specifications.................................................. 38

12.4 Mechanical Specifications ...................................................... 39

12.5 Wiring Recommendations...................................................... 39

12.6 PCB Mounting Dimensions .................................................... 39

13. PS-25T with Enclosures .............................................40

13.1 PS-A25T ............................................................................... 40

13.1.1 PS-A25T........................................................................................40

13.2 PS-C25T/25TU ...................................................................... 40

13.2.1 PS-C25T........................................................................................41

13.2.2 PS-C25TU .....................................................................................41

13.3 Wiring Diagram..................................................................... 42

A. Limited Warranty ......................................................43

List of Figures

vi AC-Q74 Installation and Programming Manual

List of Figures

Figure 1: Drill Holes for AC-Q74 Controller .....................................................12

Figure 2: Wiring Diagram and Schematic for the AC-Q74 ...............................13

Figure 3: Dimensions for PCB Mounting..........................................................39

Figure 4: PS-A25T............................................................................................40

Figure 5: PS-C25T/C25TU ................................................................................41

Figure 6: Wiring Diagram and Schematic for PC-25T, PS-A25T, PS-C25T, and PS-

25TU ................................................................................................42

List of Tables

AC-Q74 Installation and Programming Manual vii

List of Tables

Table 1: Wire Color Guide ...............................................................................13

Table 2: Programming Menus..........................................................................23

Notice and Disclaimer

viii AC-Q74 Installation and Programming Manual

Notice and Disclaimer

This manual’s sole purpose is to assist installers and/or users in the safe and

efficient installation and usage of the system and/or product, and/or software

described herein.

Before attempting to install and/or use the system, the installer

and the user must read this manual and become familiar with all

safety requirements and operating procedures.

The system must not be used for purposes other than those for which it

was designed.

The use of the software associated with the system and/or product, if

applicable, is subject to the terms of the license provided as part of the

purchase documents.

ROSSLARE ENTERPRISES LIMITED and/or its related companies and/or

subsidiaries’ (hereafter:"ROSSLARE") exclusive warranty and liability is

limited to the warranty and liability statement provided in an appendix at

the end of this document.

This manual describes the maximum configuration of the system with the

maximum number of functions, including future options. Therefore, not all

functions described in this manual may be available in the specific system

and/or product configuration you purchased.

Incorrect operation or installation, or failure of the user to effectively

maintain the system, relieves the manufacturer (and seller) from all or any

responsibility for consequent noncompliance, damage, or injury.

The text, images and graphics contained in the manual are for the purpose

of illustration and reference only.

In no event shall manufacturer be liable for any special, direct, indirect,

incidental, consequential, exemplary or punitive damages (including,

without limitation, any and all damages from business interruption, loss of

profits or revenue, cost of capital or loss of use of any property or capital or

injury).

All graphics in this manual are for reference only, some deviation between

the image(s) and the actual product may occur.

All wiring diagrams are intended for reference only, the photograph or

graphic of the PCB(s) are intended for clearer illustration and

understanding of the product and may differ from the actual PCB(s).

Introduction

AC-Q74 Installation and Programming Manual 9

1. Introduction

The AC-Q74 is a vandal resistant proximity card and keypad access

control unit suitable for external applications.

The unit accepts up to 500 users and provides entry via the use of

proximity cards and/or PIN codes.

It is designed for high security applications, due to the fact that lock

strike output and Request to Exit input are not located directly on the

AC-Q74, which eliminates the possibility of unauthorized entry to the

restricted area. A specific Power Supply Unit, PC-25T, must be used in

conjunction with the AC-Q74. See Chapter 10 for a detailed

description of the PC-25T.

1.1 Equipment Provided

The following is provided as part of every AC-Q74 package:

AC-Q74 Access Control Unit

Installation kit

Installation and operating instructions

1.2 Additional Equipment Required

Secured Power Supply PC-25T which connects to the following items:

Electric Lock Strike mechanism, which implements Fail Safe

(Power to Lock) or Fail Secure (Power to Open) functions.

Request to Exit (REX) button

Normally open type. Switch is closed when pressed.

PC-25T provides bell function.

Other Rosslare accessories can be found at Rosslare's website:

www.rosslaresecurity.com

Technical Specifications

10 AC-Q74 Installation and Programming Manual

2. Technical Specifications

2.1 Electrical Characteristics

Operating Voltage

Range

12V DC, provided from Secure Power Supply (PC-

25T)

Maximum Input

Current:

Standby: 40 mA (not including attached devices)

Maximum: 130 mA (not including attached

devices)

LEDs Two tri-colored LEDs

Built-In Proximity Reader

Read Range* 2.5 in. (65 mm)

Modulation ASK at 125 kHz

Compatible Cards All 26-Bit EM cards

* Measured using Rosslare Proximity Card (AT-11/12) or

equivalent. Range also depends on electrical environment and

proximity to metal.

2.2 Environmental Characteristics

Operating Temperature: -25°F to 145°F (-31°C to 63°C)

Operating Humidity: 0 to 95% (Non-Condensing)

Suitable for outdoor use. (IP 65)

2.3 Mechanical Characteristics

Dimensions (L x W x D) 4.72 x 3 x 1 inc. (120 x 76 x 27 mm)

Weight: 0.9 lbs (410 g)

Inhaltsverzeichnis

Andere Rosslare Kartenleser Handbücher

Rosslare

Rosslare AYC-E60B Montageanleitung

Rosslare

Rosslare AY-H12C Bedienungsanleitung

Rosslare

Rosslare AY-K20C Bedienungsanleitung

Rosslare

Rosslare AY-x20 Series Bedienungsanleitung

Rosslare

Rosslare CSN SMART AY-H6355BT Bedienungsanleitung

Rosslare

Rosslare AY-B8620 Bedienungsanleitung

Rosslare

Rosslare AY-U920BT-US Bedienungsanleitung

Rosslare

Rosslare AY 6255 Series Bedienungsanleitung

Rosslare

Rosslare AY-Z12A Bedienungsanleitung

Rosslare

Rosslare AY-Q12 Originalbetriebsanleitung

Rosslare

Rosslare DigiTool GA-01 Bedienungsanleitung

Rosslare

Rosslare AY-V12B Bedienungsanleitung

Rosslare

Rosslare MIFARE Classic AY-25B Series Bedienungsanleitung

Rosslare

Rosslare MIFARE Classic AY-K6255 Bedienungsanleitung

Rosslare

Rosslare AY-H6255BT Bedienungsanleitung

Rosslare

Rosslare AY-D09M Montageanleitung

Rosslare

Rosslare AY-Z12 Bedienungsanleitung

Rosslare

Rosslare DR-U955BT Bedienungsanleitung

Rosslare

Rosslare CSN SELECT AYC-6355 Series Bedienungsanleitung

Rosslare

Rosslare MIFARE AY-T6350 Montageanleitung

Rosslare

Rosslare Multi-Smart AY-K35 Bedienungsanleitung

Rosslare

Rosslare DR-6280 Bedienungsanleitung

Rosslare

Rosslare AY-K6255 Bedienungsanleitung

Rosslare

Rosslare AY-Q6250 Montageanleitung

Beliebte Kartenleser Handbücher anderer Marken

Lindy

Lindy 43185 Bedienungsanleitung

Lindy

Lindy 43185 Bedienungsanleitung

ViziT

ViziT RD-4F Bedienungsanleitung

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Bedienungsanleitung

AVID ID

AVID ID AVID1043 Bedienungsanleitung

Conrad

Conrad PCMCIA Bedienungsanleitung

Lindy

Lindy 51541 Bedienungsanleitung

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Bedienungsanleitung

Johnson Controls

Johnson Controls Kantech tyco ioSmart Bedienungsanleitung

ACS

ACS ACR122L Bedienungsanleitung

Secukey

Secukey S2-MF Bedienungsanleitung

Elecom

Elecom MR-SMC07 series Bedienungsanleitung

Alien

Alien ALR-9800 Bedienungsanleitung

ACS

ACS ACR310 Bedienungsanleitung

Datamars

Datamars R-IN1300 MID Bedienungsanleitung

Alarm Lock

Alarm Lock AL-PRE2 Bedienungsanleitung

xpr

xpr B100PROX-AH Benutzerhandbuch

SimpleTech

SimpleTech FlashLink Bedienungsanleitung