Rossmax HS200 Bedienungsanleitung

Andere Handbücher für HS200

Inhaltsverzeichnis

Andere Rossmax Blutzuckermessgerät Handbücher

Rossmax

Rossmax HS200 Bedienungsanleitung

Beliebte Blutzuckermessgerät Handbücher anderer Marken

ReliOn

ReliOn Prime Bedienerhandbuch

AgaMatrix

AgaMatrix Presto Bedienungsanleitung

Polymer Technology Systems

Polymer Technology Systems A1C Now Self Check Bedienungsanleitung

Medisana

Medisana GlucoDock Bedienungsanleitung

Arkray

Arkray ASSURE PLATINUM Bedienungsanleitung

Dexcom

Dexcom G4 Professional Bedienungsanleitung

Acon

Acon On Call Bedienungsanleitung

veri-Q

veri-Q BALANCE PRO Bedienungsanleitung

Medisana

Medisana MediTouch 2 Bedienungsanleitung

Infopia

Infopia Element Bedienungsanleitung

Abbott

Abbott Optimum Xceed Bedienungsanleitung

Contour

Contour TS Bedienungsanleitung

LabStyle

LabStyle Dario Bedienungsanleitung

ACONLABS

ACONLABS ON CALL EXPRESS Bedienungsanleitung

Higi Technology

Higi Technology iGlucose Bedienungsanleitung

Bayer HealthCare

Bayer HealthCare CONTOUR NEXT Bedienungsanleitung

Accu-Chek

Accu-Chek ADVANTAGE Bedienungsanleitung

Sanofi-aventis

Sanofi-aventis BG STAR Technische Daten

1. The time period for glucose results average

2. Meal ag (no meal / pre-meal / post-meal ).

3. The number used for time period based glucose results average.

4. The average glucose result calculated based on time period (upper left),

number of results (upper right) and meal ag (lower left).

5. The average glucose result calculated from all 14 day test results.

Note:

1. The consecutive 7/14/30 time period based glucose results average is

calculated from the test results obtained during the last consecutive

7/14/30 day periods.

Manufacturer of Blood Glucose Meter, Test Strip and Control Solution

Tyson Bioresearch, Inc.

5F., No. 16, 18, 20, 22, Kedong 3rd Rd., Zhunan Township, Miaoli County 35053, Taiwan

Medical Device Safety Service GmbH Schiffgraben 41, D-30175 Hannover, Germany

Manufacturer of Lancet and Lancing Device

Shandong Lianfa Medical Plastic Products Co., Ltd.

No.1 Shuangshan Sanjian Road 250200 Zhangqiu City, Jinan, Shandong PEOPLE’S REPUBLIC OF CHINA

Shanghai International Holding Corp. GmbH (Europe) Eiestraße 80, 20537 Hamburg, GERMANY

MEDIFUN CORPORATION (Lancing Device Only)

No.8, Shuyi Rd., South Dist., Taichung City, 40241, Taiwan (R.O.C.)

MDSS GmbH Schiffgroben 41,30175 Hannover, Germany

Other problems which may occur Action

A test strip has not been inserted into the meter

properly.

Review the instructions and re-insert a test strip

correctly.

Defective test strip. Replace with a new test strip.

A test strip remains in the test port for more than 2

minutes before testing.

Review the instructions and re-insert a test strip

correctly.

LCD display on the meter is blank when trying to

perform a test.

Please return the device to your local distributor or

service center.

The meter does not function after new batteries are

installed.

Please remove batteries and wait for 1 minute, reinstall

batteries to see if meter is working properly.

Authorised Representative in the European Community Manufacturer

Do not use if package is damaged In vitro diagnostic medical device

Temperature limitation Consult instructions for use

Batch code Sucient for

Use by Catalogue number

Keep dry Keep away from sunlight

Do not reuse Control

Serial Number Caution

Trouble Shooting

Explanations of Symbols

Operation Temperature 10°C ~ 40°C (50°F ~ 104°F)

Operation Humidity 10 ~ 90% RH

Hematocrit 0 ~ 70%

Test Sample Venous and Capillary Whole Blood (ngertip, palm, forearm)

Sample Volume 0.7 µL

Measuring Unit mg/dL or mmol/L

Measuring Range 20 ~ 600 mg/dL (1.1 ~ 33.3 mmol/L)

Test Time 5 seconds countdown

Memory Capacity 500 most recent results

External Output Micro USB Interface

Average 7/14/30 days average

Power supply 2 AAA batteries

Battery Life Approximately 1000 tests

Dimension 108L x 55W x 17H mm

Weight 52 g without batteries

Note: Please refer to the Test Strip Insert for the performance of system accuracy and precision.

Electromagnetic Compatibility

This Meter meets the electromagnetic compatibility requirements as per EN 61326-1 and EN 61326-2-6.

Caution: Strong electromagnetic elds may interfere with the proper operation of the meter. Do not use the

meter close to sources of strong electromagnetic radiation.

Interference substance Highest tested concentration with no signicant interference

Acetaminophen 4.25 mg/dL

Ascorbate(Ascorbic acid) 3 mg/dL

Bilirubin 25 mg/dL

Cholesterol 1200 mg/dL

Creatinine 10 mg/dL

Dopamine 2 mg/dL

EDTA 200 mg/dL

Galactose 500 mg/dL

Gentisic acid 2.5 mg/dL

Glutathione 3.07 mg/dL

Haemoglobin-HUMAN 3000 mg/dL

Heparin 5 IU/ml

Hydrogenated starch hydrolysates (HSH) 0.09 mg/dL

Ibuprofen 50 mg/dL

Icodextrin 750 mg/dL

Isomalt 0.09 mg/dL

Lactitol 0.09 mg/dL

L -DOPA(L-3-4 dihydroxyphenylalanine) 0.5 mg/dL

Maltose 2575 mg/dL

Maltitol 0.09 mg/dL

Mannitol 0.09 mg/dL

Methyldopa 2.5 mg/dL

Pralidoxime iodide (PAM) 5 mg/dL

Salicylate 50 mg/dL

Sodium Carbonate 37.5 mEq/L

Sorbitol 0.09 mg/dL

Tolbutamide 100 mg/dL

Tolazamide 6 mg/dL

Triglycerides 1525 mg/dL

Uric acid 8 mg/dL

Xylose 5 mg/dL

Xylitol 0.09 mg/dL

Warning Xylose

Xylose would result in the overestimation of blood glucose reading if the blood sample containing xylose with the concentration over 5 mg/

dL. Do not use this system during or shortly after receiving xylose absorption therapy since xylose may case inaccurate blood glucose results.

Specications

Tolerance summary of interference substance

• Transport and store at temperature -20°C ~ 50°C ( -4°F ~ 122 °F), Less than 90% RH

• Precision instrument, do not crash when being transported.

Caution:

• Rossmax HS200 Blood Glucose Monitoring System is designed for in vitro diagnostic use only and is not intended

to test on neonate.

• Any change or administer of medication based on the Rossmax HS200 blood glucose test results without the con-

sent advice of a physician or healthcare professional is not recommended.

• The Rossmax HS200 Blood Glucose Test Strip are designed for use with fresh venous whole blood or capillary whole

blood samples obtained from the ngertip, palm and forearm. DO NOT use samples other than venous whole

blood or capillary whole blood.

• False results may occur when performing the test while severely dehydrated, severely hypotensive, in shock or in

a hyperglycemic-hyperosmolar state. If you believe you are suering from any of the above symptoms, consult a

healthcare professional immediately.

• Please refer to Rossmax HS200 Blood Glucose Test Strip Package Insert to access further information on strip Limi-

tations.

IMPORTANT

• The Rossmax HS200 Blood Glucose Meter, Rossmax HS200 Blood Glucose Test Strip and Control Solution are in

conformity with the IVDD 98/79/EC.

• Rossmax HS200 Blood Glucose Monitoring System manufacturer warranty is valid only when used properly within

the guidelines of this User Manual provided.

• The Lancing device and Lancets are in conformity with the MDD 93/42/EEC.

Manufacturer Warranty

This instrument is covered by a 3 year guarantee from the date of purchase, batteries and accessories are not in-

cluded. The guarantee is valid only on presentation of the guarantee card completed by the dealer confirming date

of purchase or the receipt. Opening or altering the instrument invalidates the guarantee. The guarantee does not

cover damage, accidents or non-compliance with the instruction manual. Please contact your local seller/dealer or

www.rossmax.com.

Customer Name: ___________________________________________________________________________

Address: __________________________________________________________________________________

Telephone: ________________________________________________________________________________

E-mail address: _____________________________________________________________________________

Product Information:

Date of purchase: ___________________________________________________________________________

Store where purchased:

__________________________________________________________________________________________

Meter Storage

Limitations of the Procedure

Service and Warranty

Display Description Action

appears when the result

is HIGHER than the “HI” alert

setting.

The default setting is 180mg/dL or 9.5mmol/L and it can be changed

according to «Setting Up the HI/LO Alarms»

appears when the result

is LOWER than the “LO” alert

setting.

The default setting is 70 mg/dL or 3.2mmol/L and it can be changed

according to «Setting Up the HI/LO Alarms»

Test result is HIGHER than 600

mg/dL (33.3 mmol/L).

Repeat the test by using a new test strip. If the same message displays

again, the result is confirmed to be higher than the meter operating

range. Please consult your healthcare professional immediately for

further advice.

Test result is LOWER than 20

mg/dL (1.1 mmol/L).

Repeat the test by using a new test strip. If the same message displays

again, the result is confirmed to be lower than the meter operating

range. Please consult your healthcare professional immediately for

further advice.

Temperature is TOO HIGH

during the test procedure.

Large variation may occur between results due to high or low

temperature. Move to an environment (10˚C ~ 40˚C or 50˚F ~ 104˚F)

and wait for 30 minutes before re-testing.

Temperature is TOO LOW

during the test procedure.

Large variation may occur between results due to high or low

temperature. Move to an environment (10˚C ~ 40˚C or 50˚F ~ 104˚F)

and wait for 30 minutes before re-testing.

The preset alarm is ringing to

remind the user that it is time

to perform a blood glucose

test.

Please press any button to turn off the alarm or wait for the alarm to be

turned off automatically in 30 seconds.

Battery power is LOW.

Meter will only provide

approximately 10 more

measurements.

Replace with 2 AAA batteries.

Display Description Action

Temperature is TOO HIGH to

perform a test.

Move to an environment (10˚C ~ 40˚C or 50˚F ~ 104˚F) and wait

for 30 minutes before re-testing.

Temperature is TOO LOW to

perform a test.

Move to an environment (10˚C ~ 40˚C or 50˚F ~ 104˚F) and wait

for 30 minutes before re-testing.

Battery power is depleted for any

further usage.

Replace with 2 AAA batteries immediately.

This message is displayed when

your meter has NOT been coded.

Please return the device to your local distributor or service center.

An error message indicates a

problem with the test strip.

Please review the instructions and try again with a new test strip.

If the problem persists, please return the device to your local

distributor or service center.

An error message indicates a

problem with the test strip or

meter.

Please review the instructions and try again with a new test strip.

If the problem persists, please return the device to your local

distributor or service center.

An error message indicates a

problem with the meter.

Please remove batteries and wait for 1 minute, reinstall batteries

to see if meter is working properly. If the problem persists, please

return the device to your local distributor or service center.

An error message indicates a

problem with the test strip.

Please review the instructions and try again with a new test strip.

If the problem persists, please return the device to your local

distributor or service center.

An error message indicates a

problem with the meter.

Please remove batteries and wait for 1 minute, reinstall batteries

to see if meter is working properly. If the problem persists, please

return the device to your local distributor or service center.

An error message indicates a

problem with the test strip.

Please review the instructions and try again with a new test strip.

If the problem persists, please return the device to your local

distributor or service center.

An error message indicates

insucient volume of blood

sample for the test.

Review the instructions and try again with a new test strip, then

applying a sucient blood sample to the test strip. Please return

the device to your local distributor or service center if the problem

persists.

Display Messages

Error Messages

Initial Set-Up

Please visit the website at http://www.rossmax.com for the initial set-up instructions.

1. Download and install the applicable APP onto your mobile device.

2. Turn the meter (refer to“ Preparing Test Strip” section ), Bluetooth and the APP of mobile device on and follow set-

up and pairing instructions.

3. If the pairing is successful, once the measurement is done, the current measured reading will automatically be

transferred to the APP.

Transfer Memory data

1. Turn Bluetooth your mobile device and applicable APP on.

2. Press to turn on the meter (Fig. 49).

3. When the meter is switched ON, hold for 4 seconds to enter Bluetooth mode. will appear and ash on the

meter if the meter is not never paring with a mobile device. (Fig. 50).

4. stops blinking when the meter & mobile device is connected.

5. Press the button on APP to transfer data. The meter will display while data are being transferred (Fig. 51).

You can use PC Link to transfer test results to your personal computer. Obtain the required

software and micro USB cable to be ordered separately. Please visit the website at http://www.

rossmax.com for proceeding the downloading and installation process.

1. Follow the instructions provided with software to install the software into your personal

computer.

2. Connect the interface cable to a USB port on your computer while the meter is o.

3. Connect the other end of interface cable to the data port located on the side of the meter.

4. The word "PC" will appear on the display indicates that the meter is now in the communication

mode (Fig. 52).

General Cleaning

• Switch the meter OFF.

• Use a soft cloth moistened with water or a mild detergent, gently wipe the meter surface.

• Please avoid using alcohol or organic solvents in cleaning.

• Do not immerse the meter in water when cleaning. Do not allow water or cleaning uids into the meter, test port,

and data port.

Professional Disinfection

Applicable for people who use the blood glucose meter

• Cleaning solution and disinfecting solution: Clorox Bleach Germicidal Wipes ( Clorox Professional Products Company.

EPA Reg. No. 67619-12). Contact Clorox Company at 1-800-537-1415.

• Personal Protection: Sanitize hands, and then put on gloves before removing a germicidal wipe from the canister.

When handling items soiled with blood or body uids, use disposable latex gloves, gowns, masks and eye coverings.

• Meter: turn it o

• Wipe: Clorox Bleach Germicidal Wipes by thoroughly wetting the exterior of the meter, allow the surface to stay wet

for 1 minute then allow to air dry.

• Disposal of Infectious Materials: Use disposable gloves. Never reuse or re-wet a disposable wipe. Dispose of according

to local regulations for infectious waste disposal.

• Please refer to the Clorox Bleach Germicidal Wipes detailed usage instructions.

Please handle the meter with care. Dropping the meter may result in damage.

1. Do not expose the meter, test strips, and the Control Solution to extreme conditions such as high humidity, heat,

freezing cold, or dust.

2. The meter should be stored at room temperature in a dry and clean area. DO NOT STORE IN DIRECT SUNLIGHT OR

AREAS WITH HIGH HUMIDITY AND/OR DUST.

It is advised that you store all parts of Rossmax HS200 Blood Glucose Monitoring System in the carrying bag

provided.

How to view results stored in the memory

1. When the meter is o, press button to turn on the

meter. The Data and Time will be shown on (At the left-

upper corner. Firstly the year is shown for 1 second, and

then Month-Day will be shown on in the same area.)

2. Press to view previous results. “MEM” icon will be dis-

played on the top center area. Initially, the“year”will be

display on the top left corner (Fig.43). After 1 second

“month-day” will then be displayed on the top left cor-

ner and “time” will be displayed on the top right corner

(Fig. 44). The most recent memory results will be dis-

played rst.

3. You can press or to scroll forwards and backwards

through the results.

4. Press button to exit the stored test results or the meter will be shut o automatically after 2 minutes without

any action.

How to view the control solution test result in the memory

1. When the meter is o, press button to turn on the meter.

2. Press button again, and the latest control solution test result will be displayed (Fig. 45).

3. Press button to turn o the meter or the meter will be shut o automatically after 2 minutes without any action.

Note:

1. A result with or symbol indicates that the reading was taken out of the meter’s specied operation

temperature range and may not be accurate. This value is excluded from the 7/14/30 time period based

glucose results average.

View Time Periods Based Average Glucose Results

1. Press to turn the meter on, then Press button to view time periods based average glucose results.

2. 7/14/30 time periods based average glucose results marked with a no meal / pre-meal / post-meal and will

be displayed on screen in sequence when is pressed (Fig. 46 ~ 48 ).

3. When the meter displays 7 days with no meal status assigned, press button and the meter will then change to

view stored test results in memory.

4. Press button to turn o the meter or the meter will be shut o automatically after 2 minutes without any action.

Bluetooth Data Transfer (optional)

PC Data Transfer (optional)

Cleaning and Disinfection Procedure

Care and Storage

Recalling Values from Memory

(Fig. 49) (Fig. 50) (Fig. 51)

(Fig. 52)

(Fig. 44) (Fig. 45)(Fig. 43)

(Fig. 47) (Fig. 48)

All results

Results marked with (pre-meal)

Results marked with (post-meal)

(Fig. 46)

An error message indicates a

problem with the meter.

Please remove batteries and wait for 1 minute, reinstall batteries

to see if meter is working properly. If the problem persists, please

return the device to your local distributor or service center.

Rossmax Swiss GmbH, 9435 Heerbrugg, Switzerland, www.rossmax.com

Model: HS200

www.rossmax.com

Blood Glucose Monitoring System

Instruction Manual

IN5HS20000000XXXX

RM_IB_HS200_

EN_ver2122

Palm and Forearm

Rossmax HS200 Blood Glucose Monitoring System provides you

alternative sites testing (AST). This system provides you to test on the

palm and the forearm with the equivalent results to ngertip testing.

Caution:

Physiological dierences in the circulation between the nger and

other test sites like the forearm and palm may result in dierences

in blood glucose measurements from the other test sites and your

ngertips. Changes in blood glucose may be observed in nger

blood samples sooner than blood samples from the forearm and

other alternative sites. Rub the alternative test sites about 20

seconds before lancing. If you are testing for hypoglycemia (low

blood glucose), or if you suer from hypoglycemia unawareness,

we recommend that you test on your ngertips.

Talk to your doctor to see if alternative site testing is right for you.

With a little bit of education, you can give your ngertips a rest and

maybe test more often than you do now. For people with diabetes,

more frequent testing is a good thing. Just remember: any time you

want to be sure of an accurate, up-to-date blood glucose reading,

test on your ngertip. We strongly recommend you do.

AST ONLY in the following intervals:

• In a pre-meal or fasting state (more than 2 hours since the last meal).

• Two hours or more after taking insulin.

• Two hours or more after exercise.

1. Unscrew the lancing device cap (Fig.25).

2. Place a lancet into the lancing device (Fig.26).

3. Twist and pull to remove the protective lancet cap to

expose the sterile needle, save the cap for later use (Fig.

27).

4. Screw the lancing device cap back on. Select the skin

penetration depth preferred (Fig. 28).

5. Pull the barrel back until you hear a‘click’sound (Fig. 29).

6. Place the lancing device softly against the nger, palm,

or forearm, and press the release button to obtain a

blood sample (Fig. 30).

To unload the lancing device

1. After sampling, remove the cap containing the used

lancet carefully.

2. Push the exposed tip of the lancet into its Protective Cap

(Fig.31). Slide the Lancet Ejector forward and disposing

the used lancet in an approved container.

For further instructions please see the insert provided with

the lancing device.

CAUTION:

To reduce chances of infection:

•Always use a new and sterile lancet. Lancets are for single usage only.

•Wash hands thoroughly with soap and water before and after handling the meter, lancing device, and test

strips.

•Please refer to “Cleaning and Disinfection Procedure” section for detail instructions of meter maintenance.

SAMPLE MAY BE OBTAINED FROM FINGER, PALM OR FOREARM

1. After obtaining a blood sample, discard the rst drop to prevent contamination. Introduce the tip of the test strip

to the drop of blood. Blood sample will be automatically drawn into the test strip (Fig. 32).

2. Hold the tip of the test strip touching the blood drop until the meter beeps.

3. As soon as the blood has completely lled the conrmation window of the test strip, the meter will start a

countdown. The test result will appear on the display after 5 seconds and will be automatically stored into the

meter memory (Fig. 33).

Sucient

Blood

Insucient

blood

Sucient

Blood

Insucient

blood

The Control Solution is to ensure that Rossmax HS200 Blood Glucose Meter is working properly and the user is

performing a test correctly, please contact your local distributor or service center on where to obtain control solution.

When to Perform a Control Solution Test

1. You get your meter for the rst time before testing your blood test.

2. You open a new vial of test strips.

3. You want to check the meter and strips.

4. You suspect that the meter or test strips are not working properly.

5. Your blood glucose test results are not consistent with how you feel.

6. You think your test result does not accurate.

7. You dropped your meter.

8. Whenever your healthcare professional recommends it.

Note: For more information regarding the Control Solution, please read the Control Solution package insert.

Performing a Control Solution Test

1. Prepare a vial of Rossmax HS200 Blood Glucose Test Strip within the use by date and a Rossmax HS200 Blood

Glucose Meter.

2. Be sure of the Rossmax HS200 Blood Glucose Meter, Rossmax HS200 Blood Glucose Test Strip and Control Solution

are at room temperature between 15°C ~ 35°C (59°F ~ 95°F) before testing.

3. Insert a Rossmax HS200 Blood Glucose Test Strip into the test port. The meter will be automatically turned ON (Fig.

39).

4. When test strip is inserted, a beep will sound if the buzzer is turned on and the system checking will appear

followed by a ashing “ ”icon (Fig. 40).

5. Press and hold button for 2 seconds to change to the Control Solution test mode. " " will appear on the

display. If button is pressed again for 2 seconds, the meter will switch back to the normal testing mode.

6. Shake the Control Solution gently. Discard the rst drop of the Control Solution and squeeze a small drop on a

clean nonabsorbent surface such as a clean piece of wax paper (Fig. 41). Do not apply the Control Solution to the

test strip directly from the bottle, as contamination may occur.

7. Introduce the tip of the test strip to the droplet of the Control Solution. The Control Solution is automatically

drawn into the strip. Hold until the meter beeps. The meter will now start to count down and the Control Solution

test result will appear on the LCD screen (Fig. 42).

Thank you for choosing Rossmax HS200 Blood Glucose Monitoring System to monitor your blood glucose level.

It is designed to be accurate, easy to use, and quick in response time. This User Manual will provide you with all

the information you need to operate and maintain Rossmax HS200 Blood Glucose Monitoring System. Please read

carefully and completely before use.

Rossmax HS200 Blood Glucose Meter can be used with:

Rossmax HS200 Blood Glucose Test Strip

Rossmax HS200 Blood Glucose Monitoring System is for quantitatively measuring glucose (sugar) in whole blood

obtained from the ngertip, palm, and forearm; or venous whole blood. It is Only for use outside the body (For

in vitro diagnostic use) and intended for self-testing at homes and under professional settings to monitor blood

glucose levels.

Test Principle

On each test strip there is a target area containing reaction chemicals. When blood is applied to this area, a chemical

reaction takes place, then a transient electrical current is formed. The blood glucose concentration is calculated

based on the electrical current detected by the meter, then the result is showed on the display. The test measures

glucose from 20 mg/dL (1.1mmol/L) to 600 mg/dL (33.3mmol/L). The Rossmax HS200 Test Strip is calibrated to

display the equivalent of plasma glucose values to allow easy comparison of results with laboratory methods.

Caution

• Do not use the device to diagnose diabetes; it is intended for regular monitoring only.

• Consult your physician with regard to insulin doses. Installing/Replacing Batteries (Fig.1)

1. From the back of the meter, gently slide and remove the

battery cover.

2. Install batteries with the + and – ends matching

indication marks on the battery compartment.

The meter requires 2 AAA batteries.

3. Slide battery cover back into place.

Setting Date/Time

1. When the meter is o, press and hold button for 4 seconds to enter this setting mode.

2. Press or to select “24hr” or “12hr”. Press to conrm (Fig.2).

3. The numbers of “year” will appear and ash. Press or to adjust and Press to conrm (Fig.3).

4. The number of “month” will appear and ash. Press or to adjust and press to conrm (Fig.4).

5. The numbers of “day ” will appear and ash. Press or to adjust and press to conrm (Fig.5).

6. The numbers of “hour” will appear and ash. Press or to adjust and press to conrm (Fig.6).

7. The numbers of “minute” will appear and ash. Press or to adjust and press to conrm (Fig.7).

The set date and time will now display on the LCD screen (Fig.8, Fig.9).

8. Press to turn o the meter. The meter date/time setting is complete.

Before Testing

• Always keep test strips in the original vial. Tightly close the vial cap immediately after removing a test strip.

• Use each strip immediately after removing it from the vial. Each test strip should be used ONCE ONLY.

• Do not use test strips or Control Solution beyond the expiration date printed on the package since this may cause

inaccurate results.

• Store your test strips and the meter in a cool, dry place between 4°C and 30°C (39°F and 86°F). Temperatures beyond

this range, as well as humidity, can damage test strips and lead to inaccurate results.

• Any change of medications based on the Rossmax HS200 Blood Glucose Monitoring System results without advices

of a doctor is NOT RECOMMENDED.

• The lancing device is intended only for single user and should NOT be shared.

• Only Rossmax HS200 Blood Glucose Test Strips and Control Solution can be used with the Rossmax HS200 Blood

Glucose Meter.

• For accurate results, testing must be done within the operating temperature range (10 - 40°C/ 50 - 104°F). If the

meter is moved to an area appropriate conditions from where is out of operating temperature range, place the

meter for 30 minutes before conducting the testing.

Before testing, you need the following items:

• Rossmax HS200 Blood Glucose Meter

• Rossmax HS200 Blood Glucose Test Strip

• Lancing device and sterile lancet

Preparing the Test Strip

1. Wash hands using soap and warm water. Rinse and dry thoroughly (Fig. 20).

2. Please remove protective wrap completely before opening the vial.

3. Check the use by date on the test strip vial; use only test strips which are within the use by date. Take a test strip

from the vial and re-cap the vial immediately (Fig. 21).

4. Insert the test strip, top side facing up into the test port. The meter will automatically turn on (Fig. 22).

5. System checking will appear (Fig. 23).

6. A beep will sound, you can press or to select the meal indicator for marking the test as pre-meal test ,

post-meal test , or no marker (default) (Fig. 24).

Note: Check if your meter displays the unit of measurement you are accustomed.

7. A blood sample can now be obtained (refer to next section).

Note: The meter will shut o automatically after 2 minutes without any action.

1. The Rossmax HS200 Blood Glucose Meter displays the test result.

2. The LCD of the meter shows the measuring result, the date and the

time (Fig. 34).

Normal Glucose Values

• The glycemic recommendations for nonpregnant adults with diabetes:

• Preprandial capillary plasma glucose: 80 ~130 mg/dL (4.4 ~ 7.2

mmol/L).

• Peak postprandial capillary plasma glucose: 180 mg/dL (10.0 mmol/L).

• Diabetic patients may have blood glucose values that are moderately

elevated.

Ejecting the used Test Strip

1. After completing the test, push the strip ejector (Fig. 35) or use a tissue

paper to remove the test strip.

To unload the lancing device

1. After sampling, carefully remove the cap containing the used lancet (Fig.

36).

2. Push the exposed tip of the lancet into its Protective Cap (Fig. 36).

Slide the Lancet Ejector forward and dispose the used lancet in an

appropriate container .

For further instructions please see the insert provided with the lancing

device.

Warning:

•DO NOT point the test strip at anyone when ejecting.

•Used lancets and test strips are considered bio-hazardous. Dispose

of used lancets and test strips in a clinical waste container.

Rossmax HS200 Blood Glucose Meter is designed to display test results

between 20 ~ 600 mg/dL (1.1 ~ 33.3 mmol/L). If a “HI” (Fig. 37) or a “LO”

(Fig. 38) message appears on the display, it indicates that the meter has

detected a blood glucose level is higher than 600 mg/dL (33.3 mmol/L) or

lower than 20 mg/dL (1.1 mmol/L). It is suggested the testing procedure

should be reviewed and the test should be repeated using a new test

strip to conrm the result again.

Setting Up Reminder Alarms

Rossmax HS200 Blood Glucose Meter provides 4 reminder alarms.

All reminder alarms are OFF as default. Please follow these steps to setup reminder alarms.

1. When the meter is OFF, press and hold button for 4 seconds or longer to enter setting.

2. The rst reminder alarm will appear on the display (Fig.10).

3. Press or to select “ON” or “OFF”. If “OFF” is chosen and pressed, the meter will proceed to the next reminder

alarm setting. If “ON” is chosen (Fig.11) and pressed, the number of “hour” will start ashing (Fig.12).

4. Press or to adjust and press to conrm.

5. The numbers of “minutes” will ash (Fig.13). Press or to adjust and press to conrm. The meter will go to the

next reminder alarm setting.

6. Repeat steps 3 to 5 to set the rest of reminder alarms.

Setting Up HI/LO Alarms

Rossmax HS200 Blood Glucose Meter provides HI/LO alarm.

1. After completing the reminder alarm setting, press to enter the HI alarm setting.

2. Press or to set “ON”, press to conrm. If “OFF” is chosen, the meter will skip this setting (Fig. 14, 15).

3. To change the alarm setting, press or until you reach your desired HI setting and then press to conrm

(Fig.16). The HI alarm value range is 100 ~ 400mg/dL (5.5 ~ 22.0mmol/L) and the default value is 180mg/dL or

9.5mmol/L.

4. Continue to the LO alarm setting (Fig.17), the LO alarm value range is 40 ~ 90mg/dL (2.0 ~ 5.0mmol/L) and the

default value is 70mg/dL or 3.2mmol/L. Repeat Step 2 and 3 (Fig.18, 19) to set up your desired LO alarm setting,

press to conrm and the meter will be turned o.

HI LO

(Fig. 14) (Fig. 17)

(Fig. 15) (Fig. 18)

(Fig. 16) (Fig. 19)

For Home Use

All parts of Rossmax HS200 Blood Glucose Monitoring System should be considered potentially infectious and are

capable of transmitting blood-borne pathogens. To assure that you are not placing yourself at risk, always remember:

• The meter and lancing device is for single person use. Do NOT share them with anyone including other family

members! Do not use on multiple people!

• All parts of the kit are considered to be bio-hazardous and can potentially transmit infectious diseases even after

cleaning and disinfection have been performed.

Reference:

• “FDA Public Health Notication: Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting

Bloodborne Pathogens: Initial Communication” (2010)

http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/ucm224025.htm

• “CDC Clinical Reminder: Use of Fingerstick Devices on More than One Person Poses Risk for Transmitting Bloodborne

Pathogens” (2010)

http://www.cdc.gov/injectionsafety/Fingerstick-DevicesBGM.html

• “CDC: Infection Prevention during Blood Glucose Monitoring and Insulin Administration” (2010)

http://www.cdc.gov/injectionsafety/blood-glucose-monitoring.html

For Professional Use

• Users need to adhere to Standard Precautions when handling or using this device. All parts of the glucose

monitoring system should be considered potentially infectious and are capable of transmitting bloodborne

pathogens between patients and healthcare professionals. For more information, refer to “Guideline for Isolation

Precautions: Preventing Transmission of Infectious Agents in Healthcare Settings 2007”, http:// www. cdc.gov/hicp

ac/2007ip/2007isolationprecautions.html.

• The meter should be disinfected after use on each patient. This Blood Glucose Monitoring System may only be

used for testing multiple patients when Standard Precautions and the manufacturer’s disinfection procedures are

followed.

• Only auto-disabling, single use lancing devices may be used with this device.

• Cleaning Solution and Disinfecting Solution: Clorox Bleach Germicidal Wipes (Clorox Professional Products

Company. EPA Reg. No. 67619-12). Contact Clorox Company at 1-800-537-1415.

The complete kit contains:

• One Rossmax HS200 Blood Glucose Meter

• One Rossmax HS200 Blood Glucose Test Strip vial

• One bottle of Rossmax HS200 Control Solution

• One lancing device

• Lancets

• One Rossmax HS200 Blood Glucose Monitoring System User Manual

• One Rossmax HS200 Blood Glucose Monitoring System Quick Reference Guide

• One Rossmax HS200 Blood Glucose Test Strip Package Insert

• One Rossmax HS200 Control Solution Package Insert

• One Lancing Device Package Insert

• One Log Book

• One carrying bag

The actual composition is marked on the kit box. Some of items may not be included.

Rossmax HS200 Blood Glucose Test Strip is for blood glucose tests in conjunction

with Rossmax HS200 Blood Glucose Meter.

Each strip can be used ONCE ONLY!

A test strip consists of the following parts:

1. Target Area: Where a blood drop or control solution is touched.

2. Conrmation Window: To conrm if sucient blood drop or control solution has

been applied to Target Area.

3. Contact Bar: The end of the test strip is to be inserted into the test port (top side

facing up).

1. Check if your meter displays the Unit of

Measurement you are accustomed.

2. You can nd the Unit of Measurement that

your meter displays on the meter label.

3. If you do not know which is the right Unit for

you, ask your healthcare professional.

Introduction

Setting Up Rossmax HS200 Blood Glucose Meter

Important Information

Preparing Test Strip

Preparing the Lancing Device and Obtaining a Blood Sample

Applying a Blood Sample to the Test Strip to perform a test

Test Results

Ejecting the used Test Strip and Disposing of the Used Lancet

HI and LO Readings

Available Alternative Sites Testing

Control Solution (optional)

Important Safety Instructions

About Rossmax HS200 Blood Glucose Monitoring System

About Rossmax HS200 Blood Glucose Test Strip

Checking the Unit of Measurement

About Rossmax HS200 Blood Glucose Meter

About Rossmax HS200 Blood Glucose Meter Display

1. Test Port Insert test strip here

2. Strip Ejector Push to eject the test strip

3. Display To display measuring results and

information in numbers and icons

4. Button For the operation of the meter.

See more in the further sections

5. Meter Label Manufacturer information

6. Serial Numbers The meter manufacturer serials

7. Battery Cover To slide open and replace battery

8. Data Port To connect interface cable for data

transferring

1. Memory Icon Appears during memory mode

2. Year/Date To display year/date

3. Control Solution

Icon

Appears during a Control Solution

test and indicates its result as a

Control Solution test result

4. Alarm Icon Appears when an alarm is set

5. Test Result To display test results

6. Buzzer Icon Appears while sound setting

7. Meal Indicator Icon Pre-meal and post-meal

8. 14 day time period

average

The average glucose result calculated

from all 14 day test results

9. Time To display time.

10. Blood Drop Icon Flashes when it’s ready to perform a

test and collect a blood sample.

11. Warning Icon Appears when a result is out of range.

12. Test Strip Icon Appears when the meter is ready for

a test.

13. Temperature Icon Appears when the meter exceeds the

range of operating temperature.

14. Measurement

Units

To identify test result units (mg/dL or

mmol/L)

15. Battery Icon Appears when battery power is low.

16. Bluetooth Bluetooth connection.

(Fig. 1)

(Fig. 35)

(Fig. 36)

(Fig. 37) (Fig. 38)

(Fig. 2) (Fig. 3) (Fig. 4)

(Fig. 10)

(Fig. 5)

(Fig. 11)

(Fig. 6)

(Fig. 12)

(Fig. 7)

(Fig. 13)

(Fig. 8) (Fig. 9)

2020/05

2019MP0010

2019MP001

2020/05

2019MP0010

2019MP001

2020/05

2019MP0010

2019MP001

(Fig. 20) (Fig. 22)

(Fig. 29)

(Fig. 32) (Fig. 33)

(Fig. 34)

(Fig. 30) (Fig. 31)

(Fig. 25) (Fig. 26) (Fig. 27)

(Fig. 28)

(Fig. 21) (Fig. 23)

(Fig. 24)

Forearm

Palm

There are limitations for doing AST. Please

consult your healthcare professional

before you do AST.

(Fig. 39) (Fig. 40) (Fig. 41) (Fig. 42)

Blood Glucose Meter For self-testing

Tyson Bioresearch, Inc. Zhunan,Taiwan

Medical Device Safety Service GmbH

Schiffgraben 41, D-30175 Hannover,

Germany

RL5HS2000000000XX

YYMPXXXXXXXX

Blood Glucose Meter For self-testing

Tyson Bioresearch, Inc. Zhunan,Taiwan

Medical Device Safety Service GmbH

Schiffgraben 41, D-30175 Hannover,

Germany

RL5HS2000000000XX

YYMPXXXXXXXX

Date DateTime Time

Test Result Test Result

4. After the test result appears and if there is no further test, the meter will automatically turn o after 2 minutes. If

applying a blood sample of reduced volume, the error code (E-7) will appear on the display (Error code is described

clearly in "Error Messages" section).

Top side

Caution: If your room temperature is not between 15°C ~ 35°C (59°F ~ 95°F), the Control Solution Test Result

will incorrect.

Control Solution Results

The Rossmax HS200 Blood Glucose Meter is functioning correctly only if the Control Solution test result is within the

specied range printed on the test strip vial. If the test result is out of range, please repeat the test.

Out of range result may be caused by:

• Incorrect steps taken in performing the test.

• The Control Solution may be expired or contaminated or has been opened over 3 months.

• The Control Solution temperature is not within 15°C(59°F)- 35°C(95°F) prior to testing.

• Expired or contaminated test strips.

• Meter malfunction.

Note:

•The result under Control Solution test mode will not be included in time period based glucose results

average calculation.

•DO NOT use Rossmax HS200 Blood Glucose Meter if the problem persists. Please return the device to your

local distributor or service center.