RTX RTX3320 Bedienungsanleitung

FUNCTIONALITY

CALL FOR SERVICE:

WIRELESS TELEHEALTH GATEWAY

RTX3320

RTX3320:

The RTX3320 Wireless Telehealth Gateway is used for wireless reception of measurements

taken by on-site patient monitors such as a wireless blood pressure monitor or a wireless

personal weight scale.

When the Gateway has received the measured values, it generates a call and conveys the

data to a remote facility via a public telephone line. In some cases the Gateway is

programmed to deliver data at a specific time of day.

The delivery of data will automatically be repeated if the attempt to deliver data fails.

The Gateway works in fully automatic mode, and requires no user action.

Cleaning and Maintenance

The Gateway may be cleaned with a soft, dry cloth or a cloth dampened with tap water

and a mild detergent. A household glass cleaner on a soft, dry cloth may be used to clean

off smudges. Never use any solvent, thinner, lighter fluid, alcohol, wet wipes or similar

products on the Gateway.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

■Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Modifications not expressly approved by this companycould void the user's authority to

operate the equipment.

■This device is for use at home.

■Power requirements

Mains: 100-240 VAC, 50-60Hz, 200 mA, Class II, No applied part.

Only use the original power supply adapter with the type.

designation FW7333M/06.

■Range of temperatures

Operating 10° C to 40°C / 50° to 104° F.

Storage: -10° C to +45°C / 14° to 114° F.

Transport: -20° C to +60°C / -4° to 140° F.

■Relative humidity

Operating: 10% to 90% non-condensing.

Storage/Transport: 10% to 95% non-condensing.

■Barometric pressure

Operating: 700 –1060 hPa.

Storage/Transport: 700 –1060 hPa.

■Dimensions: Ø140 x 35 mm / Ø5.5 x 1.4 inches.

■Weight: 280 g / 10 oz including power supply adapter.

■Radio Transmitter: Bluetooth compliance: Version 1.1.

Operating frequency: 2.402 to 2.480 GHz.

Output power: 1 to 100 mW / Bandwith: <1MHz.

Antenna type: Internal, omni directional / Antenna gain: -0.8 dBi.

Operational range: Up to 100 meters (indoor) depending of surroundings.

■The frequency band is not harmonized. Use of wireless Bluetooth technology

can be restricted in some countries. Contact local authorities for more information.

■The internal antenna used for this mobile transmitter must provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter.

■RTX Healthcare declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive 93/42/ECC. A copy of the

declaration of conformity may be found at the RTX website: www.rtx.dk.

■This device has been tested and found to comply with FCC Part 68. Please read the

“US telephone network customer information” in this manual.

■This device has been tested and found to comply with TBR21.

■This device, including the power supply adapter, is certified to comply with EN60601-1.

■This device, including the power supply adapter, is tested according to EN60601-1-2.

■Data integrity and security: The privacy of data transmission with this device is secured by

data encryption and authentication (SSL), and meets authorized standards under the HIPAA.

TECHNICAL SPECIFICATIONS

RTX3320:

The RTX3320 device is for use by patients at home. It is intended to be used in

combination with a variety of patient monitors upon the prescription of a licensed

physician or other authorized healthcare provider. RTX3320 serves as the remote

communication link between compatible patient monitors, and the compatible healthcare

facility at another location. The healthcare facility could be at a disease management

center, or with the healthcare/wellness provider or other out-of-hospital caregivers.

The purpose is to transmit selected medical information (such as weight, blood pressure,

blood glucose) over a normal residential telephone line.

RTX3320 is a “black box” device – it is not connected to the patient and not operated by

the patient. The installation must be performed by or under supervision of an authorized

professional healthcare company.

This device does not measure, interpret or make any decisions on the vital data that it

conveys.

Precautions and warnings

This device is not intended for emergency calls, and may not be used for transmission

or indication of any real-time alarms or time-critical data.

Clinical judgement and experience are required to check and interpret the measurements

collected and transmitted.

This device is not for use in systems which substitute for medical care.

This device is not intended for patients requiring direct medical supervision or emergency

intervention.

RTX Healthcare · Stroemmen 6 · DK-9400 Noerresundby · Denmark · Tel: +45 9632 2300 · www.rtx.dk

RTX America, Inc. · 2099 Gateway Place · Suite 310 · San Jose · California 95110 · Phone:+1 (408) 441-8600

MEDIEHUSET WIEGAARDEN . 98 51 24 66 . TV . 100088

USERS MANUAL

HOW TO INSTALL AND INSTRUCTIONS FOR USE

RTX3320 for PSTN

INTENDED USE OF RTX3320

IMPORTANT:

Use only the original power supply adapter which comes with the device

Part# 96100805 US/UK

SIGNALING:

Light Indicator

“GATEWAY STATUS”

Telephone connector

Slot for wall mounting

Service cover (DO NOT OPEN)

Service connector

PARTS IDENTIFICATIONINSTALLATION STEP BY STEP

SYMBOL SIGNAL GREEN AMBER On

Gateway Status

On Power on – System initiating –

Gateway ready not ready

ABC Communication

with patient monitors

Flashing Gateway waiting for uninstalled

(-- -- -- --) patient monitor to appear

On Communication with

patient monitor

ABCCommunication via

telephone line

Flashing Dialing Error related to dialing

(-- -- -- --) (no dial tone or line is busy)

Quick flashing Initiating transmission Error related to

(- - - - - - - -) of data data transmission

On Transmitting data

The green light indicator on the power supply adapter indicates that power is connected.

US telephone network customer Information

This equipment complies with Part 68 of the rules and requirements adopted by ACTA. On the bottom side of this

equipment is a label that contains, among other information, a product identifier in the format US:

RTXMM00B3320. If requested, this number must be provided to the telephone company. The registration jack

USOC for the equipment is RJ11C. A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A

compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a

compatible modular jack that is also compliant. See installation instructions for details. The REN is used to

determine the number of devices that devices that may be connected to a telephone line. Excessive RENs on a

telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the

sum of RENs should not exceed five (5.0).

To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact the

local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product

identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal

point (e.g., 03 is a REN of 0.3). For earlier products the REN is separately shown on the label.

If this equipment US:RTX3320 causes harm to the network, the telephone company will notify you in advance that

temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company

will notify the customer as soon as possible. Also, you will be advised of your right to file a compliant with the

FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations

or procedures that could affect the operation of the equipment. If this happens the telephone company will provide

advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is

experienced with this equipment US:RTX3320, for repair or warranty information, please contact RTX America,

Inc., 2099 Gateway Place, Suite 310, San Jose, California 95110. If the equipment is causing harm to the telephone

network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the state public utility commission,public service

commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this

equipment US:RTX3320 does not disable your alarm equipment. If you have questions about what will disable

alarm equipment, consult your telephone company or a qualified installer.

Light Indicator

“COMMUNICATION BY

TELEPHONE LINE”

Light Indicator

“COMMUNICATION WITH PATIENT

MONITORS”

Service push button

“TEST” (To perform a test for service purposes)

Service push button

“CONNECT”

(To force a connection to the remote facility)

Line connector

POWER CONNECTOR

CONNECT TO THE TELEPHONE SYSTEM

CONNECT THE POWER SUPPLY ADAPTER TO AN ELECTRICAL

OUTLET

IMPORTANT: Never disconnect the power supply adapter from the Gateway.

Make sure that the power source cannot be switched off unnoticed.

CHECK THAT THE GATEWAY STATUS

INDICATOR IS GREEN

The Gateway is now ready for use with compatible patient monitors.

SERVICE PUSH BUTTONS:

IMPORTANT:Only use these push buttons under the supervision of service personnel

IMPORTANT

Before installation, please read all the information on both sides of this sheet!

UNPACKING

Inspect the package for any damage. In the event of damage, please call for service.

Ensure that the package contains:

■Gateway

■Power supply adapter

■Telephone cable

■Country-specific

telephone plug

converter

■This manual

IMPORTANT: Always keep the original package for return shipment.

PLACING THE GATEWAY

Place the Gateway in a level position.

It is important that the cables be carefully arranged and secured to avoid unintended

disconnection, or the possibility of tripping or blocking the path of a wheelchair or

other moving object. Be careful not to use a power socket which may be switched

off unnoticed. Do not install or service the device, power adapter or cables during

an electrical storm.

Do not place the Gateway in extreme climatic conditions (excessive heat or humidity,

in direct sunlight or where it may be exposed to large amounts of dust). Do not set

beverages near the equipment as spills may easily result in serious damage.

Protect the device and cables from damage. Keep pets and small children away

from the area where the Gateway and cables are located.

Andere RTX Tor Handbücher

RTX

RTX RTX8200 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung