Ruijie RG-CS86-20XS Series Installations- und Betriebsanleitung

Ruijie RG-CS86-20XS Series Switches

Hardware Installation and Reference Guide

Document Version: V1.0

Date: 2023.05.05

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of

this document or any portion of this document, in any form or by any means, without the prior written

consent of Ruijie Networks is prohibited.

Trademark and are owned by Ruijie

Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their

respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms.

Some or all of the products, services or features described in this document may not be within the

scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not

make any express or implied statement or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated

from time to time. Ruijie Networks reserves the right to modify the content of the document without

any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions,

inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

Network engineers

Technical support and servicing engineers

Network administrators

Technical Support

Ruijie Networks website: https://www.ruijienetworks.com/

Technical support website: https://ruijienetworks.com/support

Case portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical support email: [email protected]

Skype: [email protected]

Conventions

1. Conversions

Convention

Description

Bold font

Commands, command options, and keywords are in bold font.

Italic font

Arguments for which you supply values are in italic font.

[ ]

Elements in square brackets are optional.

{ x | y | z }

Alternative keywords are grouped in braces and separated by

vertical bars.

[ x | y | z ]

Optional alternative keywords are grouped in brackets and

separated by vertical bars.

&<1-n>

The argument before the sign (&) can be input for consecutive 1- n

times.

Double slashes at the beginning of a line of code indicate a

comment line.

2. Signs

The signs used in this document are described as follows:

Warning

An alert that calls attention to important rules and information that if not understood or followed can result in

data loss or equipment damage.

Caution

An alert that calls attention to essential information that if not understood or followed can result in function

failure or performance degradation.

Note

An alert that contains additional or supplementary information that if not understood or followed will not lead to

serious consequences.

Specification

An alert that contains a description of product or version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purpose only. In case of any discrepancy or inconsistency between the manual and the actual version,

the actual version prevails.

Ruijie RG-CS86-20XS4VS2QXS-D Switches Hardware Installation and Reference Guide

- 1 -

1 Product Overview

The RG-CS86-20XS4VS2QXS-D switch is a next-generation L3 switch featured with high performance, high security and

multiple services. Mainly applied to the aggregation layer of the campus network, the switch provides multi-layer switching

at full line rate and complete end-to-end Quality of Service (QoS) policies, assigning different service flow with different

bandwidth and ensuring no delay for key service flow. RG-CS86-20XS4VS2QXS-D provides 20 10G SFP+ ports, four 25G

SFP28 ports and two 40G QSFP+ ports.

Model

100G

QSFP28

Port

40G

QSFP+

Port

25G

SFP28

Port

10G

SFP+

Port

100M/1G/2.5

G/5G/10G

Ethernet Port

Fan

Redundancy

Power

Redundancy

RG-CS86-

20XS4VS2QXS-D

1+1

All 25G/10G SFP28 ports must work at the same rate, either 25G or 10G.

25G SFP28 ports working in 25G support SFP modules and do not support DAC cables. Please see Appendix B for

supported models and specifications.

40G QSFP+ ports of RG-CS86-20XS4VS2QXS-D support both 40G mode and 4x10G mode.

10G SFP+ ports of RG-CS86-20XS4VS2QXS-D support both 10Gbase-R and 1000base-X. 10G SFP+ ports working

in 1000base-X support auto-negotiation.

1.1 RG-CS86-20XS4VS2QXS-D

Specifications

Model

RG-CS86-20XS4VS2QXS-D

CPU

ARM CPU, each core with the clock speed of 1.25 GHz

BOOT ROM

16MB

Flash Memory

1GB

RAM

1GB, 32-bit wide + 4-bit ECC

Expansion Module

Slot

Unsupported

Fan Slot

2 (Two fans are required.)

Fan Module

M1SFANI-F

Power Supply Slot

Power Module

RG-PA150I-F

Ruijie RG-CS86-20XS4VS2QXS-D Switches Hardware Installation and Reference Guide

- 2 -

Power Supply Input

AC input

Rated voltage: 100 VAC to 240 VAC

Maximum voltage: 90 VAC to 264 VAC

Rated frequency: 50 Hz to 60 Hz

Rated input current: <3 A@90~264 VAC@full

load

High voltage direct current (HVDC) input:

Rated voltage: 240 VDC

Rated voltage: 192 VDC to 288 VDC

Rated input current: 3 A

Power

Consumption

< 85 W

Optical Module

Refer to Appendix B

The supported modules may update at any time. Please contact Ruijie Networks for details.

Temperature

Warning

Support temperature warning and overheat protection.

EMC

GB/T 9254.1

EMI

GB 4943.1

Altitude

0 to 5000 m (16404.2 feet)

Working

Temperature

0°C to 50°C (32°F to 122°F)

The temperature decreases by 1°C (1.8°F) as the altitude ranging from 3000m (9842.52 feet) to

5000 m (16404.2 feet) increases by 220m (721.78 feet).

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Working Humidity

10% to 90% RH( non-condensing)

Storage Humidity

5% to 95% RH (non-condensing)

Weight

(With two fans and

Without the power

module)

4.6 kg (10.14 lbs, with two fan modules)

Dimensions

(W x D x H)

440 mm x 330 mm x 43.6 mm (17.32 in. x 12.99 in. x 1.72 in.), 1RU

In a domestic environment, this product may cause radio interference.

This device is not suitable for use in locations where children are likely to be present.

If a fan module fails at a temperature of lower than 27°C (80.6°F), please replace the fan within 24 hours and make

sure that the faulty fan module is in place before replacement. If the temperature is higher than 27°C (80.6°F), please

replace the fan immediately.

Ruijie RG-CS86-20XS4VS2QXS-D Switches Hardware Installation and Reference Guide

- 3 -

Appearance

The RG-CS86-20XS4VS2QXS-D switch provides 20 10G SFP+ ports, four 25G SFP28 ports , two 40G QSFP+ ports, one

MGMT port, one USB port, one Console port, two power slots and two fan slots.

Figure 1-1 Appearance of RG-CS86-20XS4VS2QXS-D

Front Panel

Figure 1-2 Front Panel of RG-CS86-20XS4VS2QXS-D

Note:

1. System indicator

2. PWR1 indicator

3. PWR2 indicator

4. Fan indicator

5. MGMT port indicator

6. Locator indicator

7. MGMT port

8. SFP+ port indicator

9. SFP+ port

10. SFP28 port indicator

11. SFP28 port

12. QSFP+ port indicator

13. QSFP+ port

14. QSFP+ port indicator

15. FUNC button

16. USB port

17. Console port

Rear Panel

Figure 1-3 Rear Panel of RG-CS86-20XS4VS2QXS-D

Ruijie RG-CS86-20XS4VS2QXS-D Switches Hardware Installation and Reference Guide

- 4 -

Note:

1. Grounding point

2. Fan slot

3. Power slot

4. Asset management asset

Product Information Label

Figure 1-4 Product Information Label of RG-CS86-20XS4VS2QXS-D

Note:

The product information label is on the bottom of the switch.

Asset Management Label

The asset management label is next to the FAN2 slot of the rear panel and can be removed. The label contains information

such as asset name, category, number and registration date on the label.

External Ports

The RG-CS86-20XS4VS2QXS-D switch provides the following ports:

Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings and

other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on line and

save the log information.

To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the

local USB port is compatible with most of the USB controllers except some USB flash disks.

The RG-CS86-20XS4VS2QXS-D switch supports debugging, configuration, maintenance, management and host

software uploading of Console ports.

Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with

the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host

software uploading.

Ruijie RG-CS86-20XS4VS2QXS-D Switches Hardware Installation and Reference Guide

- 5 -

MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface is connected with

Ethernet port of a PC to perform program downloading.

SFP+ port: There are 20 10G/1G SFP+ ports, which support optical modules and DAC copper cables, and are

compatible with 1000BASE-X.

SFP28 port: There are four 25G/10G SFP28 ports, which support 25G SFP28 modules, 10G SFP28 modules/DAC

copper cables and do not support 25G copper cables. All 25G/10G SFP28 ports must work at the same rate, either

25G or 10G.

QSFP+ port: There are two 40G QSFP+ ports, which support 40G QSFP+ modules and DAC copper cables. The

port can work in 4x10G mode.

Button

The RG-CS86-20XS4VS2QXS-D switch provides a FUNC button for resetting the switch.

Press the FUNC button and the system will start collecting information. After collection finishes, the switch will be

reset automatically. Long press and short press both work.

Indicator

Identificatio

n on the

panel

Status

Meaning

System indicator

(Front panel/rear panel)

Status

Off

The system is powered off.

Solid red

1）A system fault occurs.

2）The temperature reaches the upper limit.

Blinking green

Initialization is in progress.

Solid green

The system works properly.

Solid yellow

The temperature reaches the threshold value.

Power 1 indicator

PWR1

Off

The power module is NOT in the position.

Solid green

The power module works properly.

Solid red

A power fault occurs.

Power 2 indicator

PWR2

Off

The power module is NOT in the position.

Solid green

The power module works properly.

Solid red

A power fault occurs.

Fan indicator

FAN

Solid green

The fan works properly.

Solid red

1）A fan fault occurs.

2）The fan model does not match with the system.

3）Not all fans are in position.

MGMT port indicator

MGMT

Off

The MGMT port is NOT connected.

Green

The MGMT port is connected.

Blinking green

The MGMT port is transmitting or receiving data.

Locator indicator

Off

The locator is controlled by CPLD by default.

Solid blue

The locator is controlled by O&M personnel remotely.

SFP+ port indicator

1F-20F

Off

The SFP+ port is NOT connected.

Solid green

The SFP+ port is connected at 10G/1G.

Ruijie RG-CS86-20XS4VS2QXS-D Switches Hardware Installation and Reference Guide

- 6 -

Blinking green

The SFP+ port is transmitting or receiving data at

10G/1G.

SFP28 port indicator

21F-24F

Off

The SFP28 port is NOT connected.

Solid green

The SFP28 port is connected at 25G/10G.

Blinking green

The SFP28 port is transmitting or receiving data at

25G/10G.

QSFP+ port indicator

(40G mode)

25F-26F

Indicator 1

Off

The QSFP+ port is NOT connected.

Solid green

The QSFP+ port is connected at 40G.

Blinking green

The QSFP+ port is transmitting or receiving data at

40G.

QSFP+ port indicator

(4x10G mode)

25F-26F

Indicator

1/2/3/4

Off

The QSFP+ port is NOT connected.

Solid green

The QSFP+ port is connected at 10G.

Blinking green

The QSFP+ port is transmitting or receiving data at

10G.

Heat Dissipation

The RG-CS86-20XS4VS2QXS-D switch draws air from bottom to top using the rear panel fan to ensure that the device

works properly in the specified environment. Make sure to maintain a minimum distance of 100 mm around the device for

ventilation.

Figure 1-4 Heat Dissipation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-MF2920U Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2915-L Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S1808 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6220-48XS6QXS-H Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES126S-P V2 Bedienungsanleitung

Ruijie

Ruijie RG-CS83-24GT4XS-PD Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS7003 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800 Series Handbuch

Ruijie

Ruijie RG-ES200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S3250E Series Bedienungsanleitung

Ruijie

Ruijie RG-NBS Series Bedienungsanleitung

Ruijie

Ruijie RG-S5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS88-08 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS5200-24GT4XS-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6930-2C Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES Series Bedienungsanleitung

Ruijie

Ruijie RG-ES126S-P Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES126S-LP V2 Bedienungsanleitung

Ruijie

Ruijie RG-NBS3200 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-24GT4SFP-UP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS85 Series Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung