Ruijie RG-S6220-48XS6QXS-H Installations- und Betriebsanleitung

RG-S6220-H Series Switches

Hardware Installation and Reference Guide V1.08

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our switches. This guide will help you install and use the switches.

Scope

This manual describes the functions and physical features of the switches, and presents the installation procedure,

troubleshooting procedure, technical specifications, and specifications and usages rules of cables and connectors. It is

intended for the users that have some experience in installing and maintaining network hardware and want to learn the

above information. At the same time, it is assumed that the users of this switch are already familiar with the related

terms and concepts of Ethernet.

Document Structure

Chapter 1 "Product Overview" describes the main characteristics, technical specifications, and related modules

of this product.

Chapter 2 "Preparation before Installation" lists the safety, power supply, and site requirements that must be

met before the switch can be installed.

Chapter 3 "Product Installation" describes how to install the integrated switch and modules, and connect its

power cables and grounding lines.

Chapter 4 "System Debugging" describes the commissioning after the switch is powered on for the first time.

Chapter 5 “Monitoring and Maintenance”

Chapter 5 "Troubleshooting" describes possible problems met during the installation and use of the switch and

solutions for such problems.

Appendix A "Connector and Connection Media"

Appendix B "Mini-GBIC, 10G and 40G Modules"

Appendix C “Lightening Protection”

Appendix D “Cabling Recommendations in Installation”

Appendix E “Site Selection”

Appendix F “Mini USB Console Driver Installation”

Obtaining Technical Assistance

Ruijie Networks website: http://www.ruijienetworks.com/

Service Email: [email protected]

Technical Support: http://www.ruijienetworks.com/service.aspx

Technical Support Hotline: +86-4008-111-000

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss

of data.

Hardware Installation and Reference Guide Product Overview

1 Product Overview

Ruijie S6220-H series switches are the data center-oriented high-density 10G layer 3 IPv6 box switches. They are

mainly applicable to the data center to provide the convergence access for the servers.

The RG-S6220-H Series Switches:

Model

10G

SFP+

Ethernet

Port

10GBase-T

Ethernet

Port

40G

QSFP+

Ethernet

Port

2/4/8G

SFP

Interface

Extension

Module

Slot

Redundant

Fan

Redundant

Power

Supply

RG-S6220-48XS6QXS-H

N/A

2+1

1+1

RG-S6220-48XT6QXS-H

N/A

2+1

1+1

RG-S6220-32QXS-H

N/A

2+1

1+1

An SFP+ port supports both 10GBASE-R and 1000BASE-X.

A QSFP+ port support both 40G mode and 4 x 10G mode.

10GBASE-T is downward compatible with 1000BASE-T and 100BASE-TX in full-duplex mode.

1.1 RG-S6220-48XS6QXS-H

Specifications

Model

RG-S6220-48XS6QXS-H

CPU

Quad-core processer, 1.0GHz

BOOT ROM

8MB

FLASH Memory

1GB

SDRAM

DDRIII 2GB

Extension Module

Slot

Unsupported

Extension Module

Unsupported

Fan Slot

3 (support 2+1 redundancy, configure at least 2 fan modules in one switch)

Fan Module

M6220-FAN II-F, M6220-FAN II-R

Power Supply

Slot

2 (support 1+1 redundancy)

Power Module

RG-M6220-AC460E-F, RG-M6220-AC460E-R

Power Supply

Input

AC input

Rated voltage range: 100V AC to 240V AC

Maximum voltage range: 90V AC to 264VAC

Frequency: 50 Hz to 60 Hz

Rated current: 5.29 A to 2.2A

High voltage direct current (HVDC) input:

Input voltage range: 192V DC to 290V DC

Input current range: 2.66A to 2.03A

Hardware Installation and Reference Guide Product Overview

Power

Consumption

Less than 250 W

Optical Module

Refer to Appendix B

The supported modules update at any time, contact Ruijie Networks for details.

SFP+ Port

Supported

QSFP+ Port

Supported

FC Port

Unsupported

10GBASE-T Port

Unsupported

Temperature

Warning

Support temperature warning and over-temperature protection.

EMC Standards

GB9254-2008 CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°C to 50°C (32ºF to 122ºF)

Storage

Temperature

-40°C to 70°C (-40ºF to 158ºF)

Working Humidity

10% to 95% RH (non-condensing)

Weight

Net weight: 9.5 kg (including 3 fan modules and 2 power modules)

Dimensions

(L x W x H)

440 mm x 420 mm x 44 mm, 1U

RG-S6220-H switch is a class A product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

The 10G or 40G Ethernet port of the RG-S6220-48XS6QXS-H switch supports DAC. The SFP+ port supports

1-meter, 3-meter and 5-meter cable, and the QSFP+ port supports 3-meter cable. For a detailed model and

specification, refer to Appendix B.

RG-S6220-48XS6QXS-H-R contains one RG-S6220-48XS6QXS-H host, three M6220-FAN II-R fan modules, two

power slots without power modules (RG-M6220-AC460E-R).

RG-S6220-48XS6QXS-H-AC contains one RG-S6220-48XS6QXS-H host, three M6220-FAN II-F fan modules,

two RG-M6220-AC460E-F power modules.

Product Appearance

The hardware of the RG-S6220-48XS6QXS-H includes the chassis, the power supply system and the heat dissipation

system.

The power supply system: Provides two power supply slots, which support 1+1 power supply redundancy. It is

recommended users configure power supply redundancy.

The heat dissipation system: Provides three fan module slots, which support 2+1 fan redundancy. It is

recommended users configure all fans redundancy.

Figure 1-1 Appearance of the RG-S6220-48XS6QXS-H

Hardware Installation and Reference Guide Product Overview

Front Panel

Figure 1-2 Front Panel of the RG-S6220-48XS6QXS-H

Notes:

1. Switch status indicator

2. Switch locator indicator

3. SFP+ port status indicator

4. SFP+ port

5. QSFP+ port status indicator

6. QSFP+ port

The RG-S6220-48XS6QXS-H supports 10G SFP+ module and 1G SFP module. But the 10G SFP+ module

cannot function as the 1G SFP module.

Back Panel

Figure 1-3 Back Panel of the RG-S6220-48XS6QXS-H

Notes:

1. Power supply module slot

2. Fan module slot

3. MGMT port

4. MGMT port indicator

5. Switch locator indicator

6. Grounding connector

7. USB 2.0 port

8. Console port

9. MiniUSB port

10. Switch status indicator

11. Asset management label

Asset Management Label

Hardware Installation and Reference Guide Product Overview

The asset management label is next to the switch status indicator of the switch back panel. The label is movable and

can be withdrawn from the device. Users can mark the information such as asset name, category, code and registration

date on the label which helps to improve asset management accuracy and efficiency.

Figure 1-4 Asset Management Label of the RG-S6220-48XS6QXS-H

External Ports

The RG-S6220-48XS6QXS-H provides the following ports:

Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings

and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on

line and save the log information.

MiniUSB port: This port can be used as a serial port after PC is installed with the required driver. For the driver

installation guide, refer to Appendix F.

To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the

local USB port is compatible with most of the USB controllers except some USB flash disks.

RG-S6220-H series switches supports debugging, configuration, maintenance, management and host software

uploading of both Console and MiniUSB ports. But the Console port and the MiniUSB port cannot take effect in the

meanwhile.

Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with

the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host

software uploading.

MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface is connected

with Ethernet port of a PC to perform program downloading.

SFP+ port: There are 48 10G SFP+ ports, which support optical modules and DAC copper cables, and are

compatible with 1000BASE-X.

QSFP+ port: There are six 40G QSFP+ ports, which support optical modules and DAC copper cables. This port

can work in 4x10G mode.

Indicator

Hardware Installation and Reference Guide Product Overview

Indicator

Panel

Identification

Status

Meaning

Switch status indicator

(Front panel/Back

panel)

Status

Off

The system is not powered up.

Solid red

1) One of the modules of the system fails.

2) There are less than 2 fans.

3) The internal or partial temperature exceeds the

warning working temperature, and the switching

service resets.

Blinking green.

The system is initializing.

Solid green

The system is operational.

Solid yellow

1) The temperature gets to the warning threshold.

2) Only 2 fans are in the position.

3) One of the dual powers is not connected with the

AC power cord.

Switch locator indicator

(Front panel/Back

panel)

Off

Device location is disabled.

Solid blue

Device location is enabled.

MGMT port indicator

MGMT

Off

The port is not connected.

Green

The port is connected at 1000Mbps.

Yellow

The port is connected at 10M/100M bps.

Blinking

The port is transmitting or receiving data.

SFP+ port status

indicator

1F-48F

Off

The port is not connected.

Solid green

The port is connected at 10G/1G bps.

Blinking green.

The port is transmitting or receiving data.

QSFP+ port status

indicator

49F-54F

(4 x 10G

mode)

Off

The port is not connected.

Solid green

The port is connected at 10Gbps.

Blinking green.

The port is transmitting or receiving data.

49F-54F

(1 x 40G

mode)

Off

The port is not connected.

Solid green

The port is connected at 40Gbps.

Blinking green.

The port is transmitting or receiving data.

Power Supply

The RG-S6220-H series switches support power supply the RG-M6220-AC460E-F. The smart power supply module

supports power management, and the host can read input power, input current, and temperature in real time. The

power supply module supports hot swapping.

The RG-S6220-H series switches support 1+1 power supply redundancy. To improve the stability and reliability of

the entire system, it is recommended to configure 1+1 power supply redundancy. When the two power supply

modules work normally, the switch is in the status of current sharing.

It requires at least one power supply module to work normally. Filler panels need to be installed in the unoccupied

power supply module slots to ensure ventilation and heat dissipation and avoid dusts.

Heat Dissipation

Hardware Installation and Reference Guide Product Overview

The working temperature of the RG-S6220-48XS6QXS-H switches is 0ºC to 50ºC, or 32ºF to 122ºF, and the heat

dissipation design needs to ensure the stability, safety and maintainability in such environment. The RG-S6220-H

series switches adopt fan ventilation and forced convection to ensure the device can work normally in specified

environment. Dust the device every three months to avoid blocking the ventilation openings.

The RG-S6220-48XS6QXS-H supports fan module M6220-FAN II-F and M6220-FAN II-R and provides fan speed

regulation, fan failure warning, and fan hot swapping.

Figure 1-5 Ventilation and Heat Dissipation of the RG-S6220-48XS6QXS-H

Figure 1-6 Ventilation and Heat Dissipation of the RG-S6220-48XS6QXS-H

Leave sufficient space in the front and at the back of the chassis (at least 20 cm) for ventilation.

It requires at least two fan modules to work normally. Filler panels need to be installed in the unoccupied fan

module slots to ensure ventilation and heat dissipation and avoid dusts.

1.2 RG-S6220-48XT6QXS-H

Specifications

Model

RG-S6220-48XT6QXS-H

CPU

Quad-core processer, 1.0GHz

BOOT ROM

8MB

FLASH Memory

1GB

SDRAM

DDRIII 2GB

Extension Module

Slot

Unsupported

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-S2924GT/8SFP-XS-P Bedienungsanleitung

Ruijie

Ruijie 5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6920-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6110 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S8600E Series Bedienerhandbuch

Ruijie

Ruijie RG-S6930-2C Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600E Series Bedienungsanleitung

Ruijie

Ruijie RG-S6520 Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-ES126S-P V2 Bedienungsanleitung

Ruijie

Ruijie RG-ES08 Bedienungsanleitung

Ruijie

Ruijie XS-S1960-48GT4SFP-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5750-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS88-08 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6510-4C Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6980-64QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S3760E Series Bedienungsanleitung

Ruijie

Ruijie RG-S29 Series Installationshandbuch

Ruijie

Ruijie RG-ES200 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung